开云体育

Hi Tim, If you could upload a non-working panel file to /g/jmriusers/files/ProblemsBeingWorkedOn/Updated%20Lights%20-%20Testing I'll certainly take a look. Is this reproducible in CAN

It looks to me like the address keeps truncating. It’s ‘loksound-subscribe@...’ -- Mike Heintzman Modeling the P&PU since 1953

I subscribed at: Loksound-subscribe@... -- Mike Heintzman Modeling the P&PU since 1953

I am ready for anything I think they where one time errors as thankfully? I cannot reproduce them The black tower can be held for a long time its just warm. I am ready for any test! Thanks again! Luke

Dick, This is not exactly true.? You are correct, that if a 'request' has been received for a particular clock event, the clock is to always send that event when appropriate.? While the clock is

I have used sensors with my DR5000 with a Lenz connection. These were not with the LR101 but with LDT RS16 units. I found you have to make sure the start address is set correctly or the addresses will

Michael, Does your experience reported above match the recommendations as per the JMRI Hardware - Digikeijs ( https://www.jmri.org/help/en/html/hardware/digirails/index.shtml ) help page or should I

Hi Matt I can confirm that it now behaves as expected. Best John K

Hi Stuart & Dick, Thanks for the replies.? I had assumed JMRI would not just send LCC frames unless there was an LCC connection and a clock slave on that.? But at this stage of development, the doco

Nick Excuse me for you mail was not address directly to me, however as an enthusiastic lockprogrammer user I wish to be in contact with the group John Pearson

I would like to get on the lokprogrammers group Ken Moordigian Jackson Livery 818-522-4292

I understand. The JMRI form that says cTc on it is still only a JMRI form. One must specify the panel to be started in the Dispatcher panel window. Nothing like a band new user to run the monkey test.

Mike, If it indeed is the case that (as suggested by Spuds McCat) you have 16 and 32 bit versions installed, that's not a problem. JMRI will pick one or other. Some other software may require one or

I suspect one is the 32bit and the other is the 64 bit Java.If this didn't answer your question, if you could tell us what OS you're running, and what version(so) of java you think are installed

Well, there are two copies of Java 8-221 on my machine, in different directories. And there are a lot of pointers to other Java versions in the registry. I would like to simplify things and just have

Luke, I thought we'd squashed this one. As far as I know, it's not a show-stopper. Matthew Harris may like to comment...

Jim, I am a member of the Lokprogrammer group. Would you like to be in contact with that group ? Nick Kulp "I'm not a failure. I started at the bottom and I found it easily attainable. Life is too

I’m sure you’re absolutely correct on that Paul, and thanks for the clarification. In the crazy world of Lenz I’ve already found some rough spots in transferring over, e.g., advanced consisting

Perry, Thanks for the error log.? It looks like some of the initial messages were truncated, but that is fine.? I could pick up from the first line in your listing. I can duplicate the error log,

Marc, Thanks for the info. I got the new version (4.17.4) to work, saw the com port and no start up error. Finally. Thanks again. Now I cannot get JMRI to communicate with the MRC system. When I press