开云体育

Wow! I guess I had that "ah-ha" moment. ?I got all the signal masts added, the logic automatically created, and most importantly, the signals all work as I intended! And, just as importantly, I

Dave Hand to forehead I have been a PC user and used to seeing menu on PanelPro icon. Working now on iMac due to your assistance. Thank you so much. Michael Geldert

I have an Elegoo 3.5" display. I had to install their driver, down loaded it onto a USB memory card and then installed it from their instructions (had to get those from the supplier as the normal way

Randall, Thanks for the info, even if it is not what was hoped for. All twenty-six panels contain at least one linkinglabel icons, and most have as many as three. Updating and testing all of those

Peter, I'm just wanting to use it for signals also.? I was assuming I could see the last panel which has the shutdown button on it. This Pi 3B+ is pretty strong.? I did some test and it was able to

I just received a 3.5" screen the other day but will not be able to install it until Tuesday night or next weekend. I'm not really concerned about seeing panels on it but I will check what appears.

Edit / Preferences / startup / load panels / activate sensors, was as you mentioned the way to go, thanks to both of you. Now if I could get my head around this automation stuff for one train I will

All, Who has a running 3.5" LCD screen working on the raspberry pi with JMRI on it?? Any particular default setting in Appearance Tab That should be user? Installed a 3.5" LCD I got from China and

Michael, Now I am confused. Your initial posting said they were not showing and now they are. Is there still a problem? Dave Sand

Dave Yes I have made the panel pro icon active. First few items after panel pro on menu bar are file, edit, tools etc. Michael Geldert

Thanks for all the helpful information, I now have a much better idea of how to tackle this issue. I consider the issue resolved. Jim K. (Houston)

Gabor, The real problem is that you are trying to force the hardware to do something it wasn’t really designed for. Software can’t fix that. The hardware was designed to detect equipment over a

I recently upgraded to 4.16 successfully, I’m an European modeler and programmed successfully ESU decoders. I tried to add a ROCO locomotive, the decoder pro recognized as a zemo decoder. The four

I have successfully installed JMRI to an ECOS controller under Windows 10 on a PC. Train control works correctly. Wifi throttle works correctly. However, each time I start JMRI the “Add Loco ***

John K, I presume you are meaning when running the panel with a profile using the simulated connection? I use a simple script that sets all CMRI sensors to INACTIVE, makes testing nice. I could send

Paul, It is about commuter trains, more precisely streetcars entering, from the last but one block A, say, the terminal block, say B. I must make sure that they are not halted before even the rear

The list of Panels is now alphabetized when loaded within JMRI, (although the Panels menu in JMRI maintains a separate list from the rest of JMRI for some reason), so the web pages show an

Prior to 4.16, the order of the displayed panel matched the order that the panels are loaded in startup sequence. At our club, the loading order was defined to specifically provide the first 13 panels

jmkcan(?), In fact there are several possible ways, but lets try the easy one first. Have you investigated the script named SetAllUnknownSensorsToInactive.py in the distribution JMRI/jython folder? It

When loading panels ( I use Layout Editor with three SMINI CMRI system ) is their a way of setting the sensor state automatically to 'inactive'. It is a bit of a pain having to do this manually by