开云体育

Bob H, The first thing to understand is that most everything within a PanelPro session is stored in a single file. Think of this file as a book. There is a page for turnouts, another one for

My main JMRI computer is a laptop connect to a NCE USB card.? I have added a turnout table that has 16 entries with matches my Tam Valley Octopus controllers.? I have started to work on creating

David, I have 60 turnouts so converting from DCC Loconet controlled turnouts over to LCC controlled turnouts is not economically feasible. I know how to set up the signal logic in JMRI and have

Before you switch to a PR4, be aware that it is also not 100% reliable. We have a number of group members who are having problems making the PR4 work with Win10, as well as a bunch for whom it does

Paul I believe what you are asking for is a Loconet to LCC gateway to be built into JMRI.? It would certainly be a useful tool, but I don't think it will sole your Signal conversion problem.? When I

No, I did not have the Start Menu properly set up but I'm still stuck. My attempts to save my Turnout Table and Route Table are all failing, Java says it can't find them. ?I didn't see an Open Panel

Hi Steve, Thanks, the Panel is uploaded to?/g/jmriusers/files/ProblemsBeingWorkedOn/Hampsford_Layout.xml I also created a brand new instance and new panel and it still had the

I would like to know how to submit a request for a new feature/capability in JMRI. The background on what I would like to see in JMRI is below. Background - I am implementing LCC controlled signals

Peter i upgraded as I couldn’t connect and had assumed that it was something to do with the update of the Roco firmware - seems the issue was simply down to the defaults having changed. however I

Hi Tim, Good to hear the event table has been of use :-) If you could upload your panel to the /g/jmriusers/files/ProblemsBeingWorkedOn?folder, ( or even just a really simple panel

Thanks Bruno. Your earlier question - From where does JMRI get this ttyACM0? ?- that is how the newer Lenz USB appears on the RPi when you plug it in. To make the autodetect work a bit smoother,

Screensaver mode issue may indicate that a computer power-saving feature is one element that is causing the problems. If the power saving feature also powers down USB devices (including the Sprog),

Chuck, ?Make sure your PR3 has the Version 1.0 firmware update. It contains a fix for using the PR3 on 64-bit OS's. HTH, Steve "Breezlys"

Donwload links now OK. Thanks alain

hi Paul, You're right, I should consider to make my life a bit easier and invest in the latest Lenz 23151 Ethernet-USB device and simply use the Ethernet connection. Would make my life much

hi David, That's the output I have: pi@RPi-JMRI:~ $ ls -la /dev/tty[a-z]* crw-rw---- 1 root dialout 204, 64 Jan 13 22:32 /dev/ttyAMA0 crw------- 1 root root? ? ? 5,? 3 Jan 13 22:32

Could you try again please? Looks like I didn’t wait long enough for all the various parts to get into their final places before sending out the email. Sorry for the confusion. Bob -- Bob

Hi Bob, The release note page doesn't include any download links, it just forward us to the Jenkins built (thus 4.15.3). Is that the new way to update to test versions ? Thanks and HAPPY NEW YEAR to

When you restart the pi are you using the open panel command from the panel pro menu? The list of turnouts won’t load automatically by default. If you do want this to load when you start panel pro

To explain further: The Simulator connection has been available in JMRI for along time and has rarely caused user confusion. The Internal connection type is needed for some non-connection type