David,
I have 60 turnouts so converting from DCC Loconet controlled turnouts over to LCC controlled turnouts is not economically feasible. I know how to set up the signal logic in JMRI and have already experimented with it. However, I prefer to set up the logic in the LCC nodes. This is about more than signals. It is about creating this bridge between any DCC network and the LCC network.
I know I am not a JMRI programmer but (on the surface to me) it seems like a straight forward task for someone who maintains the Logix section of JMRI. Currently, I can set up Logix to set a conditional to evaluate a turnout then set a sensor as active/inactive according to the turnout position. instead of setting a sensor, let me create an Event ID and set it to active/inactive and let me insert a HEX code from within the range I have assigned. I know the devil is in the details but this capability is desperately needed as a bridge between the DCC and LCC world....even if/when someone creates a hardware bridge.?
--
Paul Davidson
Washita & Santa Fe RR
N scale:? Southern Oklahoma circa late 70's
Paul Davidson