开云体育

You can also mirror the turnout via it's 'also throw switch' option and add a bunch of lcc (virtual) switches in JMRI. If you ever switch the turnouts over, you already have addresses for them, as

Craig, I think what you want to do is use the desktop computer to edit the panel offline from the layout? If that's right, you would: 1. copy the profile directory from the layout computer to the

Hi Tim, Thanks for the panel, have been able to re-produce locally. The issue is with Direct ( and delayed ) Turnout Feedback not working. You can see this in the turnout table by ticking show

No time anymore todat to test it, but it's probably a matter of creating a symlink in the autodetect script like:?ln -s /dev/ttyUSB0 /dev/ttyACM0

I have been working with operations pro, getting info entered. Routes are move well for awhile stop make some adjustment and continue for a bit, stop and so. Just recently I made a few adjustments and

There is a tool that comes close to this. It is under the 'OS Tools' item and is a 'Follower'. If it was generalized to work as anything following anything, it would cover the bill. Right now it only

For each LocoNet turnout that you want to mirror over, you can do it with a logix: *) Create a OpenLCB turnout in JMRI (_not_ an internal one) with the event IDs you want. *) Configure a Logix so

Bob H, The first thing to understand is that most everything within a PanelPro session is stored in a single file. Think of this file as a book. There is a page for turnouts, another one for

My main JMRI computer is a laptop connect to a NCE USB card.? I have added a turnout table that has 16 entries with matches my Tam Valley Octopus controllers.? I have started to work on creating

David, I have 60 turnouts so converting from DCC Loconet controlled turnouts over to LCC controlled turnouts is not economically feasible. I know how to set up the signal logic in JMRI and have

Before you switch to a PR4, be aware that it is also not 100% reliable. We have a number of group members who are having problems making the PR4 work with Win10, as well as a bunch for whom it does

Paul I believe what you are asking for is a Loconet to LCC gateway to be built into JMRI.? It would certainly be a useful tool, but I don't think it will sole your Signal conversion problem.? When I

No, I did not have the Start Menu properly set up but I'm still stuck. My attempts to save my Turnout Table and Route Table are all failing, Java says it can't find them. ?I didn't see an Open Panel

Hi Steve, Thanks, the Panel is uploaded to?/g/jmriusers/files/ProblemsBeingWorkedOn/Hampsford_Layout.xml I also created a brand new instance and new panel and it still had the

I would like to know how to submit a request for a new feature/capability in JMRI. The background on what I would like to see in JMRI is below. Background - I am implementing LCC controlled signals

Peter i upgraded as I couldn’t connect and had assumed that it was something to do with the update of the Roco firmware - seems the issue was simply down to the defaults having changed. however I

Hi Tim, Good to hear the event table has been of use :-) If you could upload your panel to the /g/jmriusers/files/ProblemsBeingWorkedOn?folder, ( or even just a really simple panel

Thanks Bruno. Your earlier question - From where does JMRI get this ttyACM0? ?- that is how the newer Lenz USB appears on the RPi when you plug it in. To make the autodetect work a bit smoother,

Screensaver mode issue may indicate that a computer power-saving feature is one element that is causing the problems. If the power saving feature also powers down USB devices (including the Sprog),

Chuck, ?Make sure your PR3 has the Version 1.0 firmware update. It contains a fix for using the PR3 on 64-bit OS's. HTH, Steve "Breezlys"