开云体育

The Raspberry Pi setup is _exactly_ "some option I have to remove my computer from the loop”. It’s a $35 computer that replaces your laptop. You set it up (See Steve’s web pages referenced

Paul, A PC or any other device would not replace the command station. That is necessary for any set up whether it is the DCS240 or an NCE system etc. David Klemm Sent from my iPhone Xs

Bob, If the USB question is directed at me, I do not keep my computer at my layout thus it is disconnected from my layout when I turn off my layout and leave it. When? I return, I need to reconnect

Hi Gary, There was an issue, way back that I had, that when BEMF was on, it would cause that issue. Hit horn & the engine would stop and restart the sound process. Not likely anymore, but something

Gary Try YOUTUBE they have lots of videos on Consisting. Search for DCC Consisting, you will find dozens of videos on this subject. To narrow down the search place the brand name of your

Hi Patrick, Before we raise an issue for this, can you tell me a bit more? When I start to build a CPE panel in the current JMRI release 4.14 on?macOS I do not see what your screen shot shows.

Hi Stefan? Thank you for this ,? Andrew

Ken, Thank you. As I received your message, I was away out to celebrate my Polish Christmas Eve with a traditional meal with my daughters and their families. As I am now back in "normal"mode

Does this help (taken from Steve Todd's excellent website about Raspberry Pi.?https://mstevetodd.com/rpi Merry Christmas Stefan " ------------------- Remote copy of JMRI ------------------- JMRI

I think you misunderstand the Raspberry Pi option. Steve Todd has put a lot of work into it, and it pretty much works as you describe: It’s a box that you just turn on. It comes up in a few

IMHO JMRI breaks the entire document metaphor used by almost every app I’ve ever seen. If I edit a layout/panel, etc. then shouldn’t it be marked “dirty”? And then if/when I quit the app

Thanks Dave Heap! I am still trying to figure out this Consisting thing, and your discussion really does a good job of explaining it. Regards; Gary

Done.? Thanks for the reminder Greg. A big thank you to all of the developers who keep JMRI humming along, and best wishes for a happy holiday season to everyone out there in JMRI land.? I don't

Thanks for the info.

Paul D, With any of the computer options (win/mac/pi) you can have AutoStart for everything. So you don't have to do more than flip the switch. It helps a lot if you have a button to shutdown cleanly

Paul, I keep my JMRI RaspberryPi in my electronics box, attached to the main power strip along with the command station and 12v supply for lights, etc. I turn on main power, everything boots up. In

Tis the season for giving, all year long we JMRI enthusiasts have been receiving, I just dropped $25US on to the donation plate, that works out today to $35.09CDN. Come on now JMRI users, if you can

No problems here either with both.? Frank

Thanks all. Sorta what I expected. I was looking to see if there was a way to flip a switch and and fire up my layout ...both the layout and any associated computer "stuff'. Currently, I must fire up

Thanks, Greg, for the reminder. I suggest everybody who uses JMRI during the year drop $10 into the plate, as I just did. Almost painless for a wonderful addition to our toolbox. On Dec 25, 2018, at