开云体育

Also the same engines I had problems with at home worked at the Club. FYI Not decoder problems.

Ok thanks, Let me throw this in the mix. We are using the same setup at my RR Club "Central Ohio N-Trak" the only difference is They are using a DCS 100 not a DCS 200. Also no program booster. That is

Your going to get that error using jmri Try writing a new address by selecting the decoder yourself on decoder pro Run the engine It probably will run on the new address Or Use your dcc handheld to

Number boards flash, that makes me think they are direct wired to the rails. If so, and the test would be that you can't turn them off, that could interfere with readback. The other test would be

They are excellent and so easy to use and help in setting a level playing field with all locos. JR

I've downloaded 90889-LSNSelect-Diesel-Scale-Trains-T4-GEVO-V1-R1.esux from ESU's web and opened in in LokProgrammer software.?? The number boards are not listed as a function output, so this leads

4.4 is 2 years old, lot of things have changed. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - http://tamvalleydepot.com/ (

Got it.?? Just wanted the devs to know that something "changed".

R, WiThrottle Server has always listened on all addresses on the machine. Previously, it only displayed one of them on the window, now it displays all of them. It is only a display change, the

Digging deeper into this I looked at the JMRI context and found this: Network Interface: eth4 ?Long Name: VirtualBox Host-Only Ethernet Adapter ?Host Name: rwm-PC ?IP address: 192.168.56.1 It

I upgraded from 4.4 to 4.12.? The system is Windows 7 Professional with Java 1.8_171 installed.?? On the WiThrottle panel is now says it is listening on two separate IP/Port combos when in 4.4 it

AccuTrack II?? http://www.sprog.us.com/speedo.html Check eBay, I got a used one for 65$ John

I just stumbled over the info regarding the Bachrus speedometer and especially the possibility to calibrate locos in a convinient way when using Decoder Pro and Sprog IIv4. But it seems to be almost

Ok I am still stuck in the mud. Yes just tried all of the below. I am still getting “Programmer error” “No acknowledge from loco” even though the engine number boards lights flash. This is a

Hi Jerry, There are other data types that support different types of data. For example, memory can handle a string value. I don't know if CMRI can handle memories, but the various json interfaces.?

It has been my experience that even on the programming track turning off QSI’s verbal acknowledgment before doing any programming improves the response Tom in Texas

It is in any QSI decoder locomotive window.? But since you're not detecting the decoder type you're not getting to the one of these windows unless you are manually selecting a decoder type, you will

What I would like to do is send a number representing train speed from my homebrew Arduino/IR sensor speedometer back to PanelPro to display on my panel by the block where speed is measured. I can put

Or F8 in North America...yeah, we different ;) John

It’s on the QSI Misc pane on the decoder definition, but you’re not seeing that yet. And it has no effect when using the program track anyway, so it’s not the cause of your current problem.