开云体育

Dave, Yes, Options - Allow Layout Control has always been checked. ?I uploaded the panel xml file to a folder called something like "Rummy's panel only operates turnouts in closed direction" or

Thanks, Bob M, I have a link to join the Beta program on this page:?https://enginedriver.mstevetodd.com/downloads At the moment, there is no Beta version, as Peter is still chasing the crash reported

Thank you for your reply. I am aware of the issue with separate blocks for turnouts, which is why I am testing with a simple loop representation of the layout at present. I can add the Logix

James?, As you have discovered, you will want to have separate blocks for turnouts. As a temporary solution, you can used Logix to simulate occupancy for the turnout blocks. The other block related

http://jmri.org/help/en/html/doc/Technical/XmlEditors.shtml -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator -

Jeff, TextEdit should work. Make sure that it does not try to convert to RTF. Also make sure you have a backup of the file before changing it. A simple typo can render the file unusable. Dave Sand

Thanks Dave. That's ?kind of what we thought we might have to do, but wanted it confirmed before I took that route. I'm guessing using ?text edit , or another basic text editor. I will get back

Rummy, Make sure that “Options >> Allow Layout Control” is checked. If that looks OK, upload the panel xml file. Dave Sand

On the panel I created in PanelPro to represent the current state of my layout, clicking on the turnouts on the panel will operate the turnouts in the closed direction only. ?However, clicking on

Dear Tony, I too have encountered issues with the Broadway Limited units. One Paragon2 PA1 in particular will not reset from it's 03 default. I have come across mention of "Blast Programming" (see

Might be chasing ghosts. I loaded Engine Driver 2.20.59 onto my smart phone and tablet. Both performed without incident at the club today. At this point, I suspect either a bad install on the member's

I am in the process of trying to test JMRI's automation capabilities using a small testing layout in (UK) N gauge especially built for this test. The layout consists of a straight topped and bottomed

Tony, The help section is a good place to start. On the "Trains" page and edit train, one can designate the Railroad and Engine Type for that train.

Tony That will be all part of your JMRI Operations set-up. You can have a particular type of engine assigned to a particular train. But, you do NOT have to have JMRI assign an engine. My suggestion is

Jeff, Do the Route system names start with numeric characters? If so, you will need to carefully edit the panel xml file and add the IR prefix to each system name entry. Dave Sand

i am attempting to fix an issue with a friends jrmi withrottle setup. Running on a MacBook Pro High Sierra v10.13.6. ?? if I run jrmi 4.10 I can see routes and am able to set them via the laptop ,

thank you that solves the car problem but how does the program assign the correct engine such as sp daylite engine to the sp daylite set of cars tony

I suggest you start by reading the 'Help' files that are included with in JMRI download and are on the the JMRI website. http://jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#Cars --

Steve: If you need additional testers for your Beta program I offer my time to do so. Bob M

https://postimg.cc/image/9j3qaetmj/