开云体育

Java is hitting it's (self imposed) memory limits. I'm wondering how big is your panels, on disk? Is it really supposed to be using internal, ie not-physical switches? Why the Garage Collection is

You should always dispatch a loco, stealing is bad. :) Is your phone connected to the same wifi Jmri is, and as such using withrottle, or on the lnwi's private wifi, and as such talking to it? I

Hi Dave, Thanks for this, to be honest i thought i had gone through that process of getting each section right but its a bit of a steep learning curve, been at this for all of a week now! I will look

> > I did on the decoders. Am I missing another tab? I would think they would > work via the JMRI throttle.? The strange thing is the functions work with > the protothrottle (via wi throttle)

Roger,? Yes it was.? I removed the other users and it loaded properly.? Thank you for your help with this issue. Jonathan

OK, OK,....PT here was indeed Protothrottle, I thought that I had seen the TLA used earlier in the thread but if not, my apologies

Obviously, I am, and willing and able to help on testing as well Stefan

Dan, Thanks for the quick reply, it makes a lot of sense. I will play around with your suggestion, see how it works for me. As ever you do an awesome job answering the questions here Stefan

Stefan, I would go with option 2.? But leave your storage shelves as yards. Now when a car returns to your i/c yard, the load state will flip, and you can place that car and load into storage as is,

The FTDI chipset-based adapter sold by ESU dealers for ~$30 as a spare part for their LokProgrammer has proved very reliable on all platforms, as has the very similar UN8-BE sold by RRCirKits. I use

Hi! I know this may be an odd question. Did you set all options under the consist tab to "Use Consist Address"? That allows the consist address to control all of the functions. Jay

Tim, I added the missing block name between the top left and center masts and the connection information re-appeared. I deleted and re-generated the SML and the 4 masts now work as expected. The block

I am looking at the possibility of having a stab at implementing this. (I that sounds non-committal... it is.) I need to decide: - if it is reasonable to try to implement this in Engine Driver (ED) -

Tim, Here is what I see. There are 3 track segments without blocks assigned. The left and center top masts don’t appear to be attached to any block boundaries. The right top mast is the only one

Afternoon, I am struggling a bit with dispatcher, i seemed to get the error log down to just one error, I made some changes to try and resolve it and now i get 7 errors. 2018-07-24 19:12:24,398

jmri's connection to cmri on my pi has been quite robust with the very old no-name usb - 9pin adapter. i just added a 2nd connection to my command station with the same type adapter, and it is pretty

Thank you Steve. ?It will take some studying. ?Thanks again.

Hi Graham The AutoEngineer sets the speed of the train by the "Controlling Signal" It uses a different process depending on whether you use Signal Masts (Signal Mast Logic (SML)) or SIgnal Heads

Ron, I have fixed your xml file and uploaded it to the folder that you created. There were a number of fixes required. Removed trailing spaces from system and user names. Added IX prefixes to Logix

The base issue here is how to customize for each decoder type. I use lots of Loksound. Some with FT (Brakes, etc.) and some without. I also have lots of older Tsunami, which run and sound great, no