Tim,
Here is what I see.
- There are 3 track segments without blocks assigned.
- The left and center top masts don¡¯t appear to be attached to any block boundaries.
- The right top mast is the only one with any SML content.
- The bottom mast has a SML entry but no content.
My policy is that turnouts get their own block assignment. ?This provides 3 block boundaries for attaching signal masts that protect the turnout.
Before trying to setup dispatcher, it works best to have the blocks and signal masts completed and working. ?Since I normally am running in simulation mode, I add the occupancy sensors to the panel. ?This facilities the signal testing.
Think of this as layers: ?track > blocks > signaling > sections > transits. ?Each layer should be complete before moving to the next one.
There is also a tool in the signal mast logic table to generate sections and the direction sensors for each section based on the SML.
Dave Sand
On Jul 24, 2018, at 1:31 PM, timbancroft@... wrote:
Afternoon,
I am struggling a bit with dispatcher, i seemed to get the error log down to just one error, I made some changes to try and resolve it and now i get 7?errors.
2018-07-24 19:12:24,398 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0020(UM 1:1), 1 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:12:24,399 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0021(UM 5), 2 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:12:24,400 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0023(UM 1:3), 2 anchor point signal heads missing [AWT-EventQueue-0]
2018-07-24 19:12:24,400 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0022(UM 1:2), 1 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:12:24,400 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0020(UM 1:1), 1 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:15:59,089 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0020(UM 1:1), 1 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:15:59,089 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0021(UM 5), 2 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:15:59,090 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0023(UM 1:3), 2 anchor point signal heads missing [AWT-EventQueue-0]
2018-07-24 19:15:59,090 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0022(UM 1:2), 1 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
2018-07-24 19:15:59,090 jmri.Section ? ? ? ? ? ? ? ? ? ? ? ? ?WARN ?- Section - IY:AUTO:0020(UM 1:1), 1 anchor point signal heads missing, 2 turnouts?missing signals [AWT-EventQueue-0]
?
I don't understand what it means by an anchor point signal heads missing, each block boundary has a Signal Mast and associated heads defined and?showing on the panel, i am also a bit perplexed as to the 2 turnouts missing signals, does every route into ?/ out of a block need a signal defined? even?though the movement would never happen (say the wrong way round a loop?
Any help and pointers would be amazing, i have uploaded my panel to the site here?/g/jmriusers/files/Help/Hampsford_Layout.xml
Many thanks
Tim
