开云体育

BillyBob, Yes it is from a MOD-RFID1356, purchased directly from: https://www.olimex.com/Products/Modules/RFID/MOD-RFID1356MIFARE/ https://www.olimex.com/Products/Modules/RFID/MOD-RFID1356MIFARE/

It came back. Fixed it again but had to copy another panels <LayoutEditor class over the failing panels <LayoutEditor class

Make your own choice but you should read this https://www.howtogeek.com/225385/what%E2%80%99s-the-best-antivirus-for-windows-10-is-windows-defender-good-enough/

Only a comment, but if you remove Norton, your computer will run faster and more reliably. Norton used to be a good program, but it is no longer the case. If you use Windows 7 or 10, Windows Defender

Jay, Well during that period there wasn't anything out of place except the timeout message, but that was right after the port was opened so it might not be a big deal. So that doesn't give any clues

Jon: The "new" method of blocking is "white list" as opposed to black list where known threats were blocked. Too many too fast now so need to be pre-approved has taken over... Microsoft has added this

Cliff: Bob and I were e-mail back and forth. I ended up deleting almost every thing in the failing file until it got down to just the <LayoutEditor class in the xml. That is when it dawned on me that

Not an explanation, but a confirmation. In correspondence with Walter earlier today on the JMRI-Reports connection, my main concern was that the conditions of the jumping panels was not reproducible.

Hey guys, So I've just updated to 4.8, and I noticed that there is now a check box for limiting and un-limiting the standard 3-section limit on allocating sections ahead of the trains position. My

FOUND IT Changing the name in <LayoutEditor class="jmri.jmrit.display.layoutEditor.configurexml.LayoutEditorXml" name="A" The name was 'B', changed it to 'A" and no more

I moved the Panel file into the JMRI folder on the hard drive then opened it and it still jumped.to the upper left on the monitor. Walt

page/paper/etc." to check on programs. This causing JMRI not to open, without disabling the anti-virus program, temporally.? So how long or how many downloads does it take before Norton thinks it's

Seems unlikely. It sounds like there might be a fix building. I suggest waiting for build 1796 or later at http://jmri.tagadab.com/jenkins/job/Development/job/Packages/ and trying that. Bob -- Bob

Could this be because I am using Dropbox to hold the panels? Walt

Ken, thank you! Here is the whole log after startup: 2017-08-22 22:24:07,662 util.Log4JUtil INFO - * JMRI log ** [main] 2017-08-22 22:24:17,817 util.Log4JUtil INFO - This log is appended to

Bob: more info may help us help you; This is our canned msg: n asking ANY question, you should utilize a meaningful subject line that indicates the problem and include the following information in the

Hello, I am at the beginning of my configuration of the RRCirkits Watchman. Per their instructions, I opened the Ops Mode Programmer in order to configure the WatchMan device. Since doing that, JMRI

Jay, Help->System Console That shows all the details of the logging for JMRI. Many times things happen that don't make a popup or on screen error will record things in the console. These messages are

geowar666 It seems that it only happens to the RoundTable if I have saved the panel that Jumped to the upper left and then after a restart open the one I saved, Now I even told the one I saved to open

I think that I've fixed this; there was a shadow variable (Point2D center) in the LayoutTurntable sub-class of LayoutTrack… When turntable.setCenterCoord(x,y); was called (in LayoutTrack super