开云体育

Thomas, in JMRI click on identify which should give you the address after that you should be able to read the decoder type. I don't have JMRI near me to give you the exact steps but you can see what

My nice new Roco BR85 comes with a Zimo decoder. JMRI has a long list of decoders to select from. I have no idea which decoder in in the Lok. And the Roco documentation just says "sound decoder". SO

/On 8/12/2017 1:02 PM, Nick Kulp cornwall9@... [jmriusers] wrote:// / Well I guess 20+ years is good usage. Probably should get something new. Am thinking about doing that. -- Jon Miller For me

Jon, Yep, you and I and hundreds more bought and built these. When Digitrax came out with their horrible PR1 with no software to use, it was the very FIRST Loco buffer designed by the original

This is a typical symptom of an antivirus program quarantining LaunchJMRI.exe on Windows. -- Dave in Australia

You have to find out why the JMRI installer isn’t able to put the LaunchJMRI.exe file into the C:/program files (x86)\JMRI directory. It’s not going to work until that problem is solved. I’m

Walt,I did check to make sure JMRI isn't running as you suggested. I continue to have the same problems I listed above. Thanks so much for your time.?Is there anything else I can do? Gary

Is the connection not happening, or does it show as connected and you can't control anything? The reason I ask is I had a problem where it would connect, but I couldn't control my locos. In the

I have been reading up on other interfaces and I am reasonable sure the problem is the interface. ?Thank you for your time. ?I ordered a DIGITRAX PC3 XTRA today. ?I think this will do what I want

Gary: JMRI can not be running when you do the upgrade. I dup you problem by having JMRI running and trying to install the upgrade. Walt

Found the PC board at http://www.locobuffer.com/. I may have built this, don't remember. -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, JMRI User NMRA Life member #2623

Ver 4.8 every thing else works but the slot monitor is totally blank for all tabs

Got the roster problem solved but now can't connect. This is a Windows 7 machine to a DCS100, via a LocoBuffer? Not sure what version of LocoBuffer I have. It's just a PC board with a large serial?

Rick, Can you confirm that you uninstalled Java and reinstalled it? Can you determine if that was the last change before it started printing correctly? Paul

Walt,Thank you for your help. I did try your suggestions and I continue to have problems.? Which browser do you use when upgrading JMRI? I wonder if that makes a difference. During the upgrade I

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most

Sharpy We assume you are using a windows system. Is that correct? If windows open the JMRI program folder and run the install test. Let us know the results. More info would help you . What is

On 08/09/2017 09:47 AM, Paul Bender wrote: >> On Aug 8, 2017, at 6:53 PM, wmseapc@... [jmriusers] <jmriusers@...> wrote: >> Here is my System Console below; is this what you are

I have been a model railroader for about 8 years and finally learned about JMRI. ?I downloaded the program and finally hooked up the interface to my computer. ?After many attempts and help from

I followed the suggestion to add -Djogamp.gluegen.UseTempJarCache=false to the JMRI launchers to resolve the hang-at-start problem. See https://github.com/JMRI/JMRI/pull/3880 This didn’t work. The