Could it be opening with the panels displayed actually off the physical
screen?
Mick
______________________________________
Mick Moignard
mick@...
p:+44 7774 652504
The week may start M, T, but it always ends WTF!
|
Re: JMRI 5.11.5 OBlock File corruption
Hi John,
?
If you could please post a JMRI console log of when the issue occurs.
?
Many thanks,
Steve.
?
--
Steve Young,
Member JMRI Dev Team
|
Correction Trevor a model 3b running at 1.4 mhz , bought in 2019
toggle quoted message
Show quoted text
On 17 May 2025, at 07:04, Rob Heath via groups.io <suntzu777@...> wrote:
? Hi Trevor my pi is a model 2b without Bluetooth , I think it¡¯s 900hz with 1gb of memory and running from the sd card and the motor shield is ?Diymore l298p I also have a hardware shutdown switch wired to pins 5,6 ?with the line dfoverlay=gpio-shutdown written into the config.txt file however if I update from Steve¡¯s original jmri image this gets broken , it did work with his April image but not his new may image On 17 May 2025, at 03:21, Trevor Rowland via groups.io <trevor@...> wrote:
? Also, what specific motor shield are you using?
|
Hi Trevor my pi is a model 2b without Bluetooth , I think it¡¯s 900hz with 1gb of memory and running from the sd card and the motor shield is ?Diymore l298p I also have a hardware shutdown switch wired to pins 5,6 ?with the line dfoverlay=gpio-shutdown written into the config.txt file however if I update from Steve¡¯s original jmri image this gets broken , it did work with his April image but not his new may image
toggle quoted message
Show quoted text
On 17 May 2025, at 03:21, Trevor Rowland via groups.io <trevor@...> wrote:
? Also, what specific motor shield are you using?
|
Re: Audio Icon on Web Panel - Java
Vinny,
Try this:
editor =
jmri.InstanceManager.getDefault(jmri.jmrit.display.EditorManager).getByName("NY&HV_RR_Yard_Scenes")
audioIcon = editor.getIdContents().get("Harbor")
audioIcon.play()
Daniel
On 2025-05-17 04:37, Vinny DeRobertis
via groups.io wrote:
toggle quoted message
Show quoted text
I added back this line
?
audioIcon = (AudioIcon)
?
but got the same NameError
|
Re: Audio Icon on Web Panel - Java
I added back this line
?
audioIcon = (AudioIcon)
?
but got the same NameError
|
Back when time really meant something on US railroads, they used 12-hour time. Why don't any of the JMRI clocks offer this option - am I missing it? The empolyee timetable for the prototype I model uses 12-hour time...
?
Thanks
|
Re: Audio Icon on Web Panel - Java
NameError: global name 'audioIcon' is not defined
|
Re: Any way to view JMRI "console log" via web interface?
#webserver
On 5/16/2025 8:50 PM, Steve Todd via groups.io wrote: billybob,
You can't access those file directly, because they located outside of the folders shared by the JMRI web server. The web server has a limited range of folders for security reasons. Nuts! But, you can deal with that easily by creating a symlink to the log folder and place it in the user files folder (which is shared).
Below are the instructions from my website for my RPi-JMRI image. You'll need to adjust them to fit your operating system and folder naming convention. So I'll need to solve this for Win11... A quick web search finds the basic info. I'll try it in the morning. Thanks, Steve!
|
Also, what specific motor shield are you using?
|
FWIW:
?
I have built lots of DCC-EX systems for various people, using lots of different Arduino boards (Clone Megas, Mega+WiFi, ESP32 Duino, STM32 etc.) and lots of different motor shields.? I haven't personally come across an issue with the Arduino board not driving locos yet, although I do know 1 person who was sold a DCC system using an ESP2866 board that wouldn't run DCC-EX.
?
Specifics about what boards are OK for DCC-EX are best discussed on the DCC-EX discord server though.
?
As for the Pi not providing a WiFi access point, what specific Pi board are you using Rob?
?
Trevor
|
Re: Any way to view JMRI "console log" via web interface?
#webserver
billybob,
You can't access those file directly, because they located outside of the folders shared by the JMRI web server. The web server has a limited range of folders for security reasons.
But, you can deal with that easily by creating a symlink to the log folder and place it in the user files folder (which is shared).
Below are the instructions from my website for my RPi-JMRI image. You'll need to adjust them to fit your operating system and folder naming convention.
To provide external access to the JMRI log files, ran
ln -s /home/pi/.jmri/log/ /home/pi/JMRI_UserFiles/log
Log can now be accessed as "http://RPi-JMRI.local:12080/prefs/log/session.log" from any connected browser.
?
--SteveT
|
Re: Any way to view JMRI "console log" via web interface?
#webserver
On 5/16/2025 6:49 PM, Dan Boudreau via groups.io wrote: On Fri, May 16, 2025 at 06:42 PM, billybob experimenter wrote:
Have I missed something? If not, is there a reason why JMRI cannot
show the console log?
Enable frames under Preferences... Web Server Thanks for this, Dan! Now I can wish (haha!) that I could set preferences via the web interface. Guess I'll need to get the preferences fiddled before tomorrow's session...
|
Hi Rob.
Had the issue of loco could not run forward or back, power was on track , and program track had no problem .turn on or off.fine
So I bought the original UNO Arduino , and that fixed the problem .
So some clone brand Arduino do work .
So with my, Mac
?Java -OpenJDK11U-jdk_x64_mac_hotspot_11.0.21_9
?Jmri 5.5.2
Andrew.
|
Re: Any way to view JMRI "console log" via web interface?
#webserver
On Fri, May 16, 2025 at 06:42 PM, billybob experimenter wrote:
Have I missed something? If not, is there a reason why JMRI cannot show the console log?
Enable frames under Preferences... Web Server??
|
Any way to view JMRI "console log" via web interface?
#webserver
Trying to debug via the web interface, Want to view the "Console Log" via the web interface. Curiously, I can view several panels - both control panel and layout editor. But I cannot find any way to view the console log via the web interface.
Have I missed something? If not, is there a reason why JMRI cannot show the console log?
(In this JMRI CTC implementation, I have printed some debugging info from Jython, and I want to see the Console Log via the web interface during an operating session. So far, the day's CTC "bugs" have all been blamed on hardware failures or on "dispatcher error"... But, sooner or later, I will need to be able to view the log from the web.)
|
Re: Losing occupancy when trying to record a warrant
#warrants
Bob,
?
Also try recording a warrant that doesn't include this block.
Supposedly an NX Warrant doesn't need a block to have detection as it allows 'Dark' blocks. That would mean if the block had an issue then it mightn't register as a problem.
--
H.O. Australia (Layout in Progress)
Digikeijs DR5000 LocoNet
JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG
Java: OpenLogic jre-17.0.12.7 ? Windows 10
|
Re: Script does not Print to System Console on Linux laptop
#scripting
Thanks again Dave for continuing help.? I have never used the Scripting/Scripting Output option, but now that I've found it and opened it, I see all my print results.? I guess I can use that rather than, or in addition to, the System Console.??
?
I don't not know what is different now but this will allow me to bumble my way through scripts by giving me the information I print during development.
?
Phil
|
Re: Audio Icon on Web Panel - Java
> I had to comment-out audioIcon.play() because it caused an
error.
What error? If you don't call play(), you don't play the audio.
Daniel
On 2025-05-16 22:14, Vinny DeRobertis
via groups.io wrote:
toggle quoted message
Show quoted text
Yes, NY&HV_RR_Yard_Scenes is the name of the panel and
Harbor is the ID assigned to the Audio object.
?
I had to comment-out audioIcon.play() because it caused an
error.
?
Running it now generates no errors but it does not play the
audio.
|
Re: Audio Icon on Web Panel - Java
Yes, NY&HV_RR_Yard_Scenes is the name of the panel and Harbor is the ID assigned to the Audio object.
?
I had to comment-out audioIcon.play() because it caused an error.
?
Running it now generates no errors but it does not play the audio.
|
Dave Barraza
