¿ªÔÆÌåÓý

  1. Jmriusers
  2. Messages
Expanded Topics Messages Polls
Date
Re: How to delete a turnout with jython

 

Can I ask why you would want to remove a turnout dynamically?
Re: Cannot start to read decoders

 

Erik,

Someone might be able to look at this properly if you post the log-file for a session where you can't read a decoder. Meanwhile, it's best to stop re-installing things. It does not help in 99% of the cases anyway, except in making issues harder to track down.

Wouter

On Thu, 3 Apr 2025 at 11:35, erik via <erik=[email protected]> wrote:
Helle again,
?
I have nor reinstalled JMRI with the newest Java V17 and it still does not work...
Any Help from JMRI ??
?
Erik
Re: Problems with an SML Pair #signalmasts #sml

 

>This is probably caused by three turnouts in BD17
Last night I deleted paths and SML, removed/replaced masts and turnouts. After a rebuild it worked correctly. Nothing is obvious comparing the two files but as you imply there was something making the LayoutBlockManager think the two masts were unconnected. Must have been a hidden track segment zig-zag. Thanks!
Re: Cannot start to read decoders

 

Helle again,
?
I have nor reinstalled JMRI with the newest Java V17 and it still does not work...
Any Help from JMRI ??
?
Erik
Re: How to delete a turnout with jython

 

Hi Ralph,

Can you give us an idea of the circumstances in which you want to do this? I'm totally nonplussed trying to think of a use-case, as the "normal" way of going about it would be panel creation with the Panel Pro tooling, and operational additions with scripting.

Wouter

On Thu, 3 Apr 2025, 00:36 Snorkel via , <ralphsokel=[email protected]> wrote:
I can easily create turnouts, sensors and blocks but I can't delete them from their Panel Pro tables with jython. The only method I found while browsing the class structure was dispose() and that had no effect. So far I am only using the simple jython classes ( if I have the nomenclature correct) in statements like turnouts.newTurnout(...) .
--
-Ralph
Re: Signal Mast Pairs - what aspect if none active? #sml

 

Think I sorted it out.
?
Included an Execute Delayed in the conditional.
Cycled through all the scenarios and Mast had correct aspects.
?
--
H.O. Australia (Layout in Progress)
Digikeijs DR5000 LocoNet
JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG
Java: OpenLogic jre-17.0.12.7 ? Windows 10
Re: Problems with an SML Pair #signalmasts #sml

 

It appears that you have created an unusual condition. ?Based on looking at the Route Table, BD7 -> BD17 -> BD8 is being treated as a reverse loop. ?This is probably caused by three turnouts in BD17.

Dave Sand


----- Original message -----
From: stevemac <steveo@...>
Subject: Re: [jmriusers] Problems with an SML Pair #signalmasts #sml
Date: Tuesday, April 01, 2025 3:37 PM

I deleted the SML, set the block bi-directional and now Discover fails to find any mast pair. Since the logic behind SML isn't intuitively obvious to me I subsequently added a T7 trailing main mast and tried again but it fails to Discover any pairs.
?
I've likely tried every combination and I keep getting the same result.
Re: Signal Mast Pairs - what aspect if none active? #sml

 

Nags,

Yes.

Dave Sand


----- Original message -----
From: "Nags via groups.io" <snowy999=[email protected]>
Subject: [jmriusers] Signal Mast Pairs - what aspect if none active? #sml
Date: Wednesday, April 02, 2025 11:18 PM

Here I have three options to set the signal, their conditions resulting all being not active (as intended).

For these conditions I have LogixNG to set the mast to an aspect I require. I suspect the aspect is being set but immediately changed to Danger.
?
Does SML default to forcing the mast to Danger when no mast pairs are Active?
?
--
H.O. Australia (Layout in Progress)
Digikeijs DR5000 LocoNet
JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG
Java: OpenLogic jre-17.0.12.7 ? Windows 10
Signal Mast Pairs - what aspect if none active? #sml

 

Here I have three options to set the signal, their conditions resulting all being not active (as intended).
For these conditions I have LogixNG to set the mast to an aspect I require. I suspect the aspect is being set but immediately changed to Danger.
?
Does SML default to forcing the mast to Danger when no mast pairs are Active?
?
--
H.O. Australia (Layout in Progress)
Digikeijs DR5000 LocoNet
JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG
Java: OpenLogic jre-17.0.12.7 ? Windows 10
Re: Script output delayed #scripting

 

The purpose of the script appears to be setting the aspects of several masts based on the change of an occupancy sensor.

Demo-v2.py makes it possible to set different aspects for each signal mast.

This approach is the opposite of normal signal logic. ?The normal approach uses the turnouts, occupancy sensors and the aspect of the next mast to calculate what the mast aspect should be. ?Other masts have their own set of inputs. ?Since one of the inputs is the aspect of the next mast, this creates a cascade of signal aspect changes. ?For example, a mast displays Stop. ?The previous mast will now display Approach. ?And the one before that displays Clear. ?In JMRI, this can be implemented by using signal masts and signal mast logic (SML).

Dave Sand


----- Original message -----
From: "Canadian Locomotive Logistics via groups.io" <CanadianLocomotiveLogistics=[email protected]>
Subject: Re: [jmriusers] Script output delayed #scripting
Date: Sunday, March 30, 2025 8:08 PM

Agreed, but... when i meant random, I meant speed differences or clear.
Re: Loading table content and panels xml file using MacOS Mongomery from Dropbox - Error Loading File Appears #mac-os

 

Peter,

I assume you are talking about Monterey.

When you are running Monterey, can you open the xml file using TextEdit. ?The first couple of lines should look like the following:

<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet href="/xml/XSLT/panelfile-5-5-5.xsl" type="text/xsl"?>
<layout-config xmlns:xsi="" xsi:noNamespaceSchemaLocation="">

Maybe Dropbox is having a problem.


Dave Sand



----- Original message -----
From: "Peter Riley via groups.io" <peterriley2=[email protected]>
Subject: [jmriusers] Loading table content and panels xml file using MacOS Mongomery from Dropbox - Error Loading File Appears
Date: Wednesday, April 02, 2025 2:19 PM

Hi All
?
Would anyone be able to assist with this issue.
?
History back ground
?
I have been using windows 10 PC's ?for many years with no issues and dropbox to store the information. This has been working without any issues for over 10 years. Now the PC's have been at different locations and still operating. Now one of the PC's is normally has the preferences configured ?to the railway hardware and the other PC the preferences are set to Simulator. Absolutely nothing new there works amazing.
?
Loading Issue using Montgomery OS
?
Now Moving on to the issue now. I was presented with the opportunity to change to a Mac mini using Catalina ?OS and Montgomery OS. I loaded the latest test version of JMRI onto Montgomery and all set up correctly in simulation mode and again using dropbox . When I tried to load table content and panels and selecting the correct xml file version. I get these error messages as shown below
?
So then I decided to try using Catalina OS and repeat the same JMRI set up with Dropbox again. To my surprise when I selected load table contents and panels and the same xml file version. Every thing loads correctly as expected with no issues
?
appreciate any assistance or ideas to resolve the issue
?
Regards
?
Peter
?
?
?

?
?
?

?
?
Re: Automatic Dispatching

 

I hope I get this working before you get tired of spoon feeding me!? I missed the double head selection,?? Thanks.
How to delete a turnout with jython

 

I can easily create turnouts, sensors and blocks but I can't delete them from their Panel Pro tables with jython. The only method I found while browsing the class structure was dispose() and that had no effect. So far I am only using the simple jython classes ( if I have the nomenclature correct) in statements like turnouts.newTurnout(...) .
--
-Ralph
Train tracking markers lacking when editing #blocktracking

 

JMRI 5.10 on W11
?
I thought I would experiment with train tracking on a layout editor panel. I found that when the loco IDs are placed near a block that there is no indication that something has been placed there. After a train has passed through that area then tiny little blocks show up on the panel in edit mode (if everything was done correctly).
?
This makes me grumpy.
?
George
Loading table content and panels xml file using MacOS Mongomery from Dropbox - Error Loading File Appears #mac-os

 

Hi All
?
Would anyone be able to assist with this issue.
?
History back ground
?
I have been using windows 10 PC's ?for many years with no issues and dropbox to store the information. This has been working without any issues for over 10 years. Now the PC's have been at different locations and still operating. Now one of the PC's is normally has the preferences configured ?to the railway hardware and the other PC the preferences are set to Simulator. Absolutely nothing new there works amazing.
?
Loading Issue using Montgomery OS
?
Now Moving on to the issue now. I was presented with the opportunity to change to a Mac mini using Catalina ?OS and Montgomery OS. I loaded the latest test version of JMRI onto Montgomery and all set up correctly in simulation mode and again using dropbox . When I tried to load table content and panels and selecting the correct xml file version. I get these error messages as shown below
?
So then I decided to try using Catalina OS and repeat the same JMRI set up with Dropbox again. To my surprise when I selected load table contents and panels and the same xml file version. Every thing loads correctly as expected with no issues
?
appreciate any assistance or ideas to resolve the issue
?
Regards
?
Peter
?
?
?
?
?
?
?
?
Re: Chaining transits with a different locomotive #dispatcher

 

Steve,

That's OK.

Thank you very much.

JeanLouisDelestre@...

De: "Steve_G via groups.io" <RailRodder22@...>
?: [email protected]
·¡²Ô±¹´Ç²â¨¦: Mercredi 2 Avril 2025 15:11:14
Objet: Re: [jmriusers] Chaining transits with a different locomotive #dispatcher

Jean
Build 2264 or later, found here?. As with all updates make sure you have a backup?before installing.
Steve G.


On Wed, 2 Apr 2025 at 04:18, Jean-Louis Free via <jeanlouisdelestre=[email protected]> wrote:
Steve,

Is it this one ?


De: "Steve_G via " <RailRodder22=[email protected]>
?: [email protected]
·¡²Ô±¹´Ç²â¨¦: Lundi 31 Mars 2025 15:27:46
Objet: Re: [jmriusers] Chaining transits with a different locomotive #dispatcher

Ken: "Duplicate" transit and then edit.
Jean 48 hrs should get it in the nightly Development build. In changes " " should show up on the first build its included in.
Steve G.
?


--
---------------------------------------------
Jean-Louis Paris-France
---------------------------------------------
JRMI 5.9.5 on Windows
DCC EX? on Arduino Mega
Java version 17.1.12
?



--
---------------------------------------------
Jean-Louis Paris-France
---------------------------------------------
JRMI 5.9.5 on Windows
DCC EX? on Arduino Mega
Java version 17.1.12
?
Re: JMRI Loconet control of DCS240+ #digitrax

 

Bob, thank you for your concise troubleshooting suggestions.
?
Previously I had tried using DCS100 as a command station selection and it worked as expected.
?
I started from the beginning last night to get it working.? After resetting the Locobuffer-NG connection to the Pi, I choose Locobuffer-NG and DCS240+ and viola! everything worked.? So I don't know what I did differently before from what I did last night but the system now works as expected.
?
As my favorite acronym goes BTSOOM but I'm happy it is resolved.
--
Dale Gloer
Jack of all trades at home and Southern Alberta Model Railway
Re: Chaining transits with a different locomotive #dispatcher

 

Jean
Build 2264 or later, found here?. As with all updates make sure you have a backup?before installing.
Steve G.


On Wed, 2 Apr 2025 at 04:18, Jean-Louis Free via <jeanlouisdelestre=[email protected]> wrote:
Steve,

Is it this one ?


De: "Steve_G via " <RailRodder22=[email protected]>
?: [email protected]
·¡²Ô±¹´Ç²â¨¦: Lundi 31 Mars 2025 15:27:46
Objet: Re: [jmriusers] Chaining transits with a different locomotive #dispatcher

Ken: "Duplicate" transit and then edit.
Jean 48 hrs should get it in the nightly Development build. In changes " " should show up on the first build its included in.
Steve G.
?


--
---------------------------------------------
Jean-Louis Paris-France
---------------------------------------------
JRMI 5.9.5 on Windows
DCC EX? on Arduino Mega
Java version 17.1.12
?
Re: Chaining transits with a different locomotive #dispatcher

 

Steve,

Is it this one ?

JeanLouisDelestre@...

De: "Steve_G via groups.io" <RailRodder22@...>
?: [email protected]
·¡²Ô±¹´Ç²â¨¦: Lundi 31 Mars 2025 15:27:46
Objet: Re: [jmriusers] Chaining transits with a different locomotive #dispatcher

Ken: "Duplicate" transit and then edit.
Jean 48 hrs should get it in the nightly Development build. In changes " " should show up on the first build its included in.
Steve G.
?


--
---------------------------------------------
Jean-Louis Paris-France
---------------------------------------------
JRMI 5.9.5 on Windows
DCC EX? on Arduino Mega
Java version 17.1.12
?
Re: Printing Switchlists #operationspro

 

Hi Dan - thanks for info. Not sure what I did but when I built the 2 trains again the car pick ups are not duplicated! So, all good so far. I only have about 40 cars on my point-to-point layout and short spurs and yard tracks. As a result I'm trying to use PanelPro to allocate cars to various sidings and industries so that I can best balance the distribution of cars across an operating session.
I had previously tried the system of waybills that Paul Scoles had written about years ago but could never quite get it right. I now like the switchlists that PanelPro produces and are trying to train my operators in using them.?
Thanks for your assistance.
Cheers,
?
61 - 80 of 239101