Re: Inline LogixNG add block item different on two systems
#logixng
Bob,
The dialog is created in this class:
jmri.jmrit.logixng.tools.swing.TreeEditor
In the method makeAddEditFrame()
Each LogixNG action/expression has its own class for creating a panel to configure that class, for example:
jmri.jmrit.logixng.actions.swing.ActionBlockSwing
To test it, add a LogixNG, add a ConditionalNG and add a Block action.
The Block action is not the only panel that are very wide, which is why it's better to fix the problem in the class TreeEditor.
Thank you for looking into this!
Daniel
toggle quoted message
Show quoted text
On 2025-04-12 12:45, Bob Jacobsen via groups.io wrote: What’s the exact title of this window? I don’t use that part of the code, but perhaps I can fix the GUI.
Bob
On Apr 11, 2025, at 11:55?PM, George Hofmann via groups.io <george.hofmann@...> wrote:
Tinkering with this window back on my Linux machine, I see that if I reduce the window width, the third and second entry fields just disappear as the window shrinks with no way to access them or any indication that they even exist. This is not a good user interface. A scroll bar should appear.
George —
Bob Jacobsen
rgj1927@...
|
Re: Inline LogixNG add block item different on two systems
#logixng
What’s the exact title of this window? I don’t use that part of the code, but perhaps I can fix the GUI. Bob On Apr 11, 2025, at 11:55?PM, George Hofmann via groups.io <george.hofmann@...> wrote:
Tinkering with this window back on my Linux machine, I see that if I reduce the window width, the third and second entry fields just disappear as the window shrinks with no way to access them or any indication that they even exist. This is not a good user interface. A scroll bar should appear.
George — Bob Jacobsen rgj1927@...
|
Re: Chaining transits with a different locomotive
#dispatcher
Hi Steve,
OK, there is no rush.
No, trains have "normal names"? :
JeanLouisDelestre@...
De: "Steve_G via groups.io" <RailRodder22@...> ?: [email protected]贰苍惫辞测é: Samedi 12 Avril 2025 03:16:23 Objet: Re: [jmriusers] Chaining transits with a different locomotive #dispatcher Jean
I have never seen this error before.?
I won't be able to do anything till next week.?
Does this train have a different train name from the others?
Steve G.
?
-- ---------------------------------------------
Jean-Louis Paris-France
---------------------------------------------
JRMI 5.9.5 on Windows
DCC EX? on Arduino Mega
Java version 17.1.12
?
|
Re: jmri 5.10 automation no longer functions
Thank you I will try those things
Tony
toggle quoted message
Show quoted text
On Apr 11, 2025, at 4:52?PM, Steve_G via groups.io <RailRodder22@...> wrote:
? Tony
The signal speeds if using SML come from the Warrents tab in Edit->preferences.
If using speedprofiling then make sure you are using the correct scale.
If not using speed profile, you should make the maxlinespeed as 100. That would normally be the fasted speed of any block. That is the base speed for? the layout by throttle setting %.
For SML "Basic Model Signals"? to get the top speed, green signal just past and green signal ahead, 4 sections clear sections ahead.
Using "No Signals" you would only need to allocated two empty ahead,? it only uses "Normal" and "Medium" and? zero. Set all block speeds to "Normal" and make "Normal" = 100.
Steve G.
?
?
?
?
?
?
|
Re: Inline LogixNG add block item different on two systems
#logixng
Tinkering with this window back on my Linux machine, I see that if I reduce the window width, the third and second entry fields just disappear as the window shrinks with no way to access them or any indication that they even exist. This is not a good user interface. A scroll bar should appear.
?
George
|
Re: Chaining transits with a different locomotive
#dispatcher
Jean
I have never seen this error before.?
I won't be able to do anything till next week.?
Does this train have a different train name from the others?
Steve G.
?
|
Re: DecoderPro no loco roster
#roster
OK,
This is what I have done today. I have windows 10 and my computer is set for automatic updates. I don't really use this laptop for anything else but JMRI and because of JMRI updates it is on the Wi-Fi internet. So today I decided to restore the computer. When I went into the system restore, I was thinking of going back several weeks hoping that I would get to where there were no issues. To my Suprise the restore went back to the 9th, the day all these issues started. The message said that Microsoft updated a system program on that day, and it automatically created a restore point before the update. I did not realize there was an update done. After restoring the system to that date all my JMRI issues were gone. My roster is back in Decoder Pro and everything in Operations Pro is back.?
?
So. this whole event of problems stemmed from windows updating not JMRI or me.?
?
?
--
Mike Swederska
Meramec Valley Lines
Modeling Mopac equipment in 3/16
|
Re: Inline LogixNG add block item different on two systems
#logixng
Well here's the deal. I cannot increase the width of the window. I'm not sure why. This window seems to be excessively wide to begin with and could have been designed in a more compact configuration. But be that as it may I should be able to make the window wider. There are no scroll bars either. The possible clue here is that the monitor that I am working with at the museum is configured in portrait mode, i.e. taller than it is wide, in order to fit into a tight space. I can't even think of a workaround. It is Windows 11.
?
George
|
Re: DecoderPro Opens every time as a new install
Thanks to everyone for their advice and responses.? Many definitely suggested the issue might be windows and it was.? Despite every attempt to solve this windows issue of creating a guest account even though all the actual genuine account information the PC could not be corrected.? We purchased a new PC and it functions flawlessly with JMRI Decoder Pro.? I also installed AZUL Java 17 in setting up the new PC.
Thanks again to everyone that helped me with this issue.
George Ronn
George,
?
One - admittedly unlikely - suggestion that no-one has mentioned is to check if the account you use on the Windows PC at the museum is part of the "Guests" group.? If it is, then by design Windows will reverse any changes made during your session and start fresh the next time you login.
?
To check this, you need to open a command prompt with admin access, then type the command:
net user <username>
then press Enter.? NOTE: <username> is the name you are logged in to Windows with.
?
Down near the end of the list you should see information on "Local Group Memberships" and "Global Group Memberships".? If either of these list "Guests", then Windows is doing what it is supposed to do by resetting the account at each login.
|
Re: jmri 5.10 automation no longer functions
Tony
The signal speeds if using SML come from the Warrents tab in Edit->preferences.
If using speedprofiling then make sure you are using the correct scale.
If not using speed profile, you should make the maxlinespeed as 100. That would normally be the fasted speed of any block. That is the base speed for? the layout by throttle setting %.
For SML "Basic Model Signals"? to get the top speed, green signal just past and green signal ahead, 4 sections clear sections ahead.
Using "No Signals" you would only need to allocated two empty ahead,? it only uses "Normal" and "Medium" and? zero. Set all block speeds to "Normal" and make "Normal" = 100.
Steve G.
?
?
?
?
?
?
|
Re: New laptop … advice needed, S mode?
You may not be able to install JMRI
Windows in S mode is a streamlined version of Windows designed for
security and performance, restricting app installation to the
Microsoft Store and requiring Microsoft Edge for browsing.
It's a
one-way process, and switching out of S mode is possible but not
reversible
On 4/11/2025 4:18 PM, burrettmd via
groups.io wrote:
toggle quoted message
Show quoted text
Gang, my old basement laptop was calling it quits, so a new
one has arrived. Before I install JMRI, is there anything I
should be aware of? New machine is windows 11 in S mode which I
don’t know much about. Does that present any issues? Thanks.
Bruce B. Blackwood in Mount Airy, MD
|
Re: New laptop … advice needed, S mode?
I didn’t know about S mode either, so I googled and found this
Key is “?it
allows only apps from Microsoft Store“ - so I’m guessing you won’t be able to install JMRI at all
That link does tell you how to get out of S mode though
Phil G
toggle quoted message
Show quoted text
On 11 Apr 2025, at 21:18, burrettmd via groups.io <burrett@...> wrote:
?
Gang, my old basement laptop was calling it quits, so a new one has arrived. Before I install JMRI, is there anything I should be aware of? New machine is windows 11 in S mode which I don’t know much about. Does that present any issues? Thanks. Bruce B.
Blackwood in Mount Airy, MD
|
New laptop … advice needed, S mode?
Gang, my old basement laptop was calling it quits, so a new one has arrived. Before I install JMRI, is there anything I should be aware of? New machine is windows 11 in S mode which I don’t know much about. Does that present any issues? Thanks. Bruce B. Blackwood in Mount Airy, MD
|
Hi, I had something a bit similar with my Windows 11 laptop.
?
The JMRI Panel Pro 5.6 startup got stuck after I'd added an NCE Power Pro connection using a USB to serial adapter and then restarted (saved the preferences and Panel Pro tried to restart).
?
My solution to get JMRI to startup was to:
?
1) kill Java in the Windows Task Manager (may stop other Java applications running at the same time?).
2) Find the JMRI profile.xml and edit out all the references to the NCE connection (I used Notepad++ for the editing). Save the edited version back where it came from (best to make a copy first).
3) Startup JMRI Panel Pro.
?
I then swapped to a Raspberry Pi running Pi OS/JMRI and the same USB to serial adapter to temporarily carry on my task.
?
I didn't solve the Win11/JMRI connection problem but maybe that's where the startup sticks for some other types of JMRI to DCC command station connection?.
?
Regards
?
Nick
|
Re: Jython script Error - obj has no attribute 'setIsForward'
Thanks for the speedy response Dave. Ok I'll add that but the throttle ID in the IM was 1111. Why is that invalid? It's not part of my roster but im using it or testing.
|
Re: Jython script Error - obj has no attribute 'setIsForward'
Vinny,
You are not checking to see if the throttle is valid.
if self.throttle is not None: ? ? self.throttle.setIsForward(True) else: ? ? print 'Unable to get throttle for {}'.format(TrainsBreakInLocoIDNum) ? ? # do whatever to handle the error
Dave Sand
----- Original message ----- Subject: [jmriusers] Jython script Error - obj has no attribute 'setIsForward' Date: Friday, April 11, 2025 2:05 PM
Team, attached snip of script where the error is occurring. Funny thing is that it works fine 90% of the time. --
Many thanks in advance!
Vinny DeRobertis ~ Apex, NC New York & Hudson Valley RR
Windows 7 Pro / Java 11 / JMRI v5.10 Command Station: Digikeijs DR5000. Booster: Digikeijs DR5033 (4) Samsung A7 10.4" Tablets Fully Kiosk/Engine Driver v2.37.187 DCC/DMX Gateway: Pricom LLS. LocoNet Input Modules: Digikeijs DR4088LN DCC Output Modules: Digikeijs DR4018 / Yamorc YD8116. Sensors: Model Train Technology: DETECTOR-HO. Turnout Motors: MTB MP1
Attachments:
|
Re: Jython script Error - obj has no attribute 'setIsForward'
...just realized that after this error, now I cannot control Turnouts from the CPE. this happened last night for the first time ever. I rebooted TWICE and got things working again and now it has happened again. Nothing else in the system console other than the setisforward error.
|
Jython script Error - obj has no attribute 'setIsForward'
Team, attached snip of script where the error is occurring. Funny thing is that it works fine 90% of the time.
--
Many thanks in advance!
Vinny DeRobertis ~ Apex, NC
New York & Hudson Valley RR
Windows 7 Pro / Java 11 / JMRI v5.10
Command Station: Digikeijs DR5000.
Booster: Digikeijs DR5033
(4) Samsung A7 10.4" Tablets
Fully Kiosk/Engine Driver v2.37.187
DCC/DMX Gateway: Pricom LLS.
LocoNet Input Modules: Digikeijs DR4088LN
DCC Output Modules:
Digikeijs DR4018 / Yamorc YD8116.
Sensors: Model Train Technology: DETECTOR-HO.
Turnout Motors: MTB MP1
|
Re: Have a question about having a train pick up a specific car
#operationspro
Another idea is to add a new "Car Type".? That's done via the Cars window, by selecting the "Add Car" button, getting that window, then clicking the Car Type "Edit" button.
?
?
Type in your new car type, then click Add:
?
?
This does NOT create a 'custom load', and allows you to use the default "L" or "E".??Set the necessary spur(s) to accept that Car Type.??
?
This has worked for me quite well with cars in/out for a steel mill, automobile plant, and grain elevators.
?
Best,
?
CRZ
|
Re: DecoderPro no loco roster
#roster
I am having a similar problem.? I've run decoder pro for many years and have a roster of over 100 engines.? Yesterday, I was using it and everything was working fine.? I then shut it down and about a 1/2 hour later restarted it and low an behold no roster.? If I look on my server I can see the directory and all of my engine files but I've tried rebuild roster and it didn't work.? Can someone walk me thru the steps to recover my roster?
Thanks, John Moonan
|
Bob Jacobsen
George Hofmann
Glikestrains
