开云体育

Well, I'm no expert, but a couple of things struck me.? You said in your fourth sentence that you were programming on the main.? In my mind, that's not a good idea when resetting a decoder.? I

I was resetting some basic NCE and Digitrax mobile decoders back to their original programming.? For some reason I never could reset TCS, NCE decoders on my Lenz system.? No problem with Digitrax.?

I was not even thinking about embroidery, but if we can do embroidery, I am definitely in for a shirt. I really like the embroidered model rr shirts over th screen printed. -- Heath @ Human[c]ity

local virtual signal head to correspond to the actual SE8c signal head. This looks to be exactly what I need. Thanks. -- Chris

Take a look at jython/FollowSE8c.py It listens to LocoNet (i.e. the other computer’s traffic) and sets a local virtual signal head to correspond to the actual SE8c signal head. Bob — Bob Jacobsen

https://www.jmri.org/help/en/package/jmri/jmrit/beantable/SignalMastRepeater.shtml I am using signal masts but the issue is the signal mast that I want to repeat/mirror is running on a different

Just perused the Lakeshores attire at Daylight Sales. The prices are not bad especially considering it includes custom embroidery. I’m in for a JMRI shirt. —John.

... Chris, Assuming that you are using "Signal Masts", it is MUCH easier to just use JMRI "signal mast repeaters". See

Hello Dan, typically, for North American sound projects, the horn is not on sound slot 2 but on sound slot 3 or 4 (the one that's not the bell - I can't remember and projects.esu.eu doesn't load for

Steve et al, I am late to this discussion but here is my two cents. I have lived with the 0 to 24 hour clock since my teen years.? I wish everyone and everything would go to the 24 hour clock.? I

Early 12hr digital clocks that had an alarm had a dot in the top left of the first digit for PM. Public clocks and ones without alarms didn't need to tell you whether it was pre or post noon. Never

I'm working on getting signals and CTC running on a layout that has three separate dispatch panels for different zones running using PanelPro. Where those zones meet I'm trying to mirror the state of

Several NMRA Divisions as well as OpSIG use Daylight Sales for apparel so I'd almost be certain that they could do something for JMRI. However I'd caution against a white shirt. They don't stay white

this is on a modest sized club layout.? (see Illinois Midland Model Railroad club on FB) We are using NCE PowerPro 5A serial/usb to a RPi.? ?panel pro 4.21.3 I had control point turnouts setup and

Personally I would prefer something other than white as I cannot keep a white shirt white for more than a few minutes. -- Heath @ Human[c]ity http://www.humancity.org ( http://www.humancity.org/ )

Check out PDF file I have files section under Bob Cochran. I have the all the parts listed that I used. The problem with EB1 is the same as Tony's old power shields is that don't have a logic output,

Nixies don’t have segments. Each digit is a separate electrode in the tube, which makes a neon glow when a voltage is applied to it. That’s how they get such good looking digits. I’ve never seen

Hello - I have just completed my first decoder installation, an ESU LokSound 5 and Decoder Buddy into an Atlas Gold Series GP40-2 that previously had an old QSI decoder. The LokSound decoder was

I would think a Nixie display would display "A" or "P" in much the same way as a "7-segment" LED, bu using the existing appropriate segments in a way that does not encode for a digit. (They would not

This should probably be tken to the jmri-developers list, not jmriusers. But since it has been asked, I do not see any indication that JMRI implements this for sopporting _any_ hardware clock. The