开云体育

That's hard as I can't see the pop up so am only guessing but I suspect it's the one that says: Edit ConditionalNG(s) in progress. Please complete edit f any ConditionsNGs and try again. I certainly

I have an issue I can't track down and think it might have something to do with ghost block. It's repeatable. Every car in both trains is detectable. (I use BDL716 and tests show it very sensitive and

Begin forwarded message:

Peter, You may have identifies a long standing issue with the Power Cab. Try replacing the v165.B back into the Power Cab and try it again. There is an issue where the Power Cab can lock itself out.

There are several DIY controllers listed here. https://dcc-ex.com/throttles/index.html#dedicated-hardware The WiThrottle Protocal are what you want, not the DCC-EX Protocol ones. -- Peter

Peter writes: “As I am not too group posting orientated, i assume everyone that responded to my power cab issue, will see this message/response.” Yes, that’s how it works. Reading you

I opened a case. Reading CVs from Zimo MXULF · Issue #14050 · JMRI/JMRI ( https://github.com/JMRI/JMRI/issues/14050 )

Sorry for the late reply, time difference and long day at work. Hi Trevor I’ve tried a lot of different COM port settings in JMRI, but I haven’t noticed any difference. Notes inside ZCS this

I found it in the profile directory Thank you Tony

Tony, After you do the store, go to "Help -> System Console", click on the "Copy to clipboard" button and paste in a reply. Dave Sand

Dave There are no recent backups in the only directory ‘backupPanels’ Is there some setting i need to set to cause the backups. The original version of the saved file is not in the folder. I just

Tony, When you "store" with the same name, the previous file is moved to the "backupPanels" directory with the current date and time added to the file name. Dave Sand

Hi Tony, See https://www.jmri.org/help/en/package/apps/jmrit/log/Log4JTreePane.shtml In the selection box at the bottom, enter jmri.jmrit.dispatcher Select TRACE from the level selector, Click Set

in previous versions of jmri i got hundreds of backups of panels automatically without me doing a backup. using jmri 5.10 i open a profile which opens a layout panel. The panel had a table of

I will try that. I have no idea how to turn on trace for dispatcher. How do i do that Tony

HI everyone, As i am not too group posting orientated, i assume? everyone that responded to my power cab issue, will see this message/response. Firstly, thanks to everyone for your valued advise and

Thanks Dave and Daniel, I am now using routes (triggered by LogixNG) which makes the actual setting of the turnouts at startup a lot easier. I am using the feature which sets a sensor when all of the

For what it's worth, thinking about what I saw today while testing this (and without knowing all the intricacies of JMRI <> MXULF communications), it kind of feels like the issue might be that the

Sorry, I forgot to add 1 thing. MAYBE, when the decoder reading failed, there was a noticeable delay between clicking on the "Read type from decoder" button, and anything happening on the MXULFA /

I have done some testing, using JMRI 5.10 and my Zimo MXULFA v0.84.93, on a Linux laptop. I was able to reproduce what I believe to be the same symptoms as Jonas. I had my MXULFA connected to a Zimo