Well yes and no.?

i have 150 plus devices online.?

other devices and port forwarding are already in effect.?

why cant a ssl certificate just be imported into JMRI like some of my other devices?

Re: JMRI Error: Service mode programmer NCE is offline. #nce

On Wed, Sep 18, 2024 at 08:23 AM, Marcus Ammann wrote:

Hi En-TACT

?

For your USB Interface set up, see Larry Puckett’s YouTubes, Part 1 at:

& Part 2 at:

?

Regards

Marcus

?

?

Be aware that the YouTube"Part 2" mentioned above refers to the CP210x drivers used for the earlier version of the NCE USB adapter, whereas based on his log AND his screen captures, the OP apparently has the newer version with the CH340 chip.

?

Needless to say, the CP210x drivers won't work with the CH340 chip.

?

Steve

"Breezlys"

Re: Deleting Objects in Scripts

#234620

Guess I need something like this:

?

import java.beans

...

try:
? ? sensors.deleteBean(s,"CanDelete")
? ? sensors.deleteBean(s,"DoDelete")
except java.beans.PropertyVetoException, e:
? ? print("exception thrown")

#? parse e and decide what to do

...

Re: Trouble loading Java #java

#234619

Dave,

Since this is a java 8 version, you would be limited to JMRI 4.26. If
you want newer versions of JMRI, you would need to go elsewhere for a
Java version. The version with i586 is the 32 bit version while the
x64 is the 64 bit version. Depending on the version of Windows, you
might need one or the other.

For newer versions of JMRI, go here and read about other Java
providers.



I've been using the Asul source most of the times. I'd go with Java 17
right now. But Java 11 will do. We can't predict if you would have
problems with Java 21. I'm using Java 21 but part of that is to see if
I find any problems with that.

-Ken Cameron, Member JMRI Dev Team
www.jmri.org
www.fingerlakeslivesteamers.org
www.cnymod.com

Re: 5.9.4 and withrottle #withrottleserver

#234618

Thanks Peter,

John

Re: Unable to create JmDNS with error [AWT-EventQueue-0]

#234617

Hi Daniel

?

that as it - the IPv6 adapter had been deactivated earlier in the PC's life!?

?

Thank you.

Re: Saving Throttles #jmrithrottle

#234616

No joy. I'm using a RPI and when the throttle load fails, the console is locked up as well. All the individual throttles for each engine are saved, but I can't load them together as a group in the throttle layout. In the throttle prefs, you can save a single default layout, but not a group of them. I'm pretty well stuck on this.

?

I don't know if there is a specific set of steps to take in saving the throttles as a group and then loading them after the computer has been shutdown and restarted.

?

Alan - Valdez, Alaska?

Re: Deleting Objects in Scripts

#234615

开云体育

The PropertyVetoException tells you that the sensor is in use in block IB10.

You should remove the sensor from the block where it is used, before removing the sensor.

When sensors.deleteBeans(s,"CanDelete") does _not_ throw an exception, you can go ahead and delete the sensor with:

sensors.deleteBeans(s,"DoDelete")

Daniel

On 2024-09-18 22:00, Snorkel wrote:

Show quoted text

Using sensors as an example I learned that I could delete a sensor with

?

sensors.deleteBean(s,"DoDelete")

?

However I saw that it would be better to check for listeners before doing this and that

?

sensors.deleteBeans(s,"CanDelete")

?

might do the job. However I get a bunch of errors starting with

?

javax.script.ScriptException: java.beans.PropertyVetoException: java.beans.PropertyVetoException: Found in the following <b>Blocks</b><ul><li>IB10</li></ul>It will be removed from the Blocks<hr> in <script> at line number 4

?

It seems like I should be able to handle the exception but I don't know how.

Re: JMRI Error: Service mode programmer NCE is offline. #nce

#234614

I'm running JMRI on my Windows 10 machine, I'll have a look at the latest drivers since it mentions my OS.? I'll keep you all posted - thanks!

I sill have not made it yes I know I must be a real dummy

#234613

Hello Dan, yes I know I’ve been a real pain and I apologize for that, but I just cannot figure out how to move trains and routes from my old computer to my new one. Of course I tried the

things you ?suggested but they did not work for me (And I think you know why). The files are all in a table and I either have to move the entire table or nothing at all and I have not been able to do that so far.?

I know when all the folks were doing this a few months back there was a much simpler way to do it (make a copy) and then transfer it ? ?
I know that the other required tables all had a transfer mode where you could go ahead and make a copy by going to the various table and then transfer the table over to the new computer. ?I’m talking about anyway I have not been able to do it. Will you please help me with this ? ?and i have a small group (we meet every Thursday. ?I sure like to?

--

THANK YOU from Frank

Deleting Objects in Scripts

#234612

Using sensors as an example I learned that I could delete a sensor with

?

sensors.deleteBean(s,"DoDelete")

?

However I saw that it would be better to check for listeners before doing this and that

?

sensors.deleteBeans(s,"CanDelete")

?

might do the job. However I get a bunch of errors starting with

?

javax.script.ScriptException: java.beans.PropertyVetoException: java.beans.PropertyVetoException: Found in the following <b>Blocks</b><ul><li>IB10</li></ul>It will be removed from the Blocks<hr> in <script> at line number 4

?

It seems like I should be able to handle the exception but I don't know how.

Re: Trouble loading Java #java

#234611

Here's the page I was using.

?

Re: New laptop - NCE USB interface problems #nce

#234610

To everybody who replied. ??

This morning I reloaded the drivers and …..

?

It all worked. ?

Thanks to everyone

?

Terry

Re: 5.9.4 / WiThrottle problem #withrottleserver

#234609

Downloaded and tested, seems to be working fine now. Exact test workflow as follows:

?

Update 5.9.3 to 5.9.4, verify WiThrottle inop.

Turn off routes and turnouts, verify WiThrottle works.

Re-enable routes and turnouts, verify WiThrottle inop.

Update to 5.9.4+0412Z, verify WiThrottle works on iPhone, ED on Android and Kindle.

?

Thanks for the quick work!

?

Sam

Re: 5.9.4 / WiThrottle problem #withrottleserver

#234608

Today I tested JMRI.5.9.4plus+jenkins+20240918T0412Z+Rcee52923b8a.tgz

It works

--

Petr ?ídlo
Czech Republic

Re: 5.9.4 and withrottle #withrottleserver

#234607

John,

If you want to try the fix before it's released, you can download a build here: 


-- 
Peter Ulvestad

JMRI Users Group Moderator (  )
Tam Valley Group Moderator (  )
Sprog-DCC Group Moderator (  )
Edmonton Model Railroad Association (  )

Re: DN147 Series decoder not found #digitrax

#234606

The DN147 is definitely in 4.26. Are you using "New Loco" and "Read type from decoder" to find it?

-- 
Peter Ulvestad

JMRI Users Group Moderator (  )
Tam Valley Group Moderator (  )
Sprog-DCC Group Moderator (  )
Edmonton Model Railroad Association (  )

DN147 Series decoder not found #digitrax

#234605

Hi,

I just bought some DN147 series Digitrax decoders. DecoderPro was not able to identify this particular decoder when I put it in a loco.

?

My current version of DecoderPro 4.26 does not have any DN147 decoder definitions.

Is it possible to add these decoders into my system without updating everything ?

I've tried newer versions of DecoderPro and ended up deleting everything. There was a problem with my PR4 and Sprogg not being identified when plugged in.

?

I found some DMF files on Digitrax website and I was able to download them but I have no idea if this is what I need and what to do with them.

?

I'm using an older iMac and have Java version 8 which is all working happily. It seems updating Java to a newer version causes no end of problems.

?

I'm no computer expert so any advise in simple terms would be greatly appreciated.

Re: 5.9.4 / WiThrottle problem #withrottleserver

#234604

All, this fix is in the latest Development build, available here:

Also, a workaround to this issue is to disable Turnouts and Routes under Allowed Controls in WiThrottle Preferences. Useful if you don't use Turnouts or Routes on your WiThrottle client.

?

Sam, it would be helpful if you would give the Development build a try and advise results.

?

--SteveT

?

Re: Apache server

#234603

You can change it in Preferences.

--SteveT