开云体育

First off, sounds like you are just writing. Put a Lok on the programming track, select new entry, then read type from decoder. That should read something from the decoder. If that does not work, the

Seeedstudio 125KHz, Ethernet/Serial, Uno Micheal, Actually, the Ethernet shield type (W5100 or W5500) shouldn't even matter since the 125KHz readers don't use SPI. To get you started, upload the

Blair, You better bite! LOL! It would be a BIG help if you jumped into the testing of stuff with us. Have a great weekend! Tom

Hmm.? I've just been 'gifted' an Uno, and both of those Ethernet boards; working status unknown.? Over the years, I've studiously avoided Ethernet.? But now all I need is a reader, or a few.

Micheal, OK, so like Steve mentioned, I need to know which Ethernet shield you are using (W5100 or W5500 based?). We should be able to get this set up and hashed out fairly quickly. :-) Tom

PN532, Ethernet/Serial, Nano/Uno/Mega Steve, Speaking of the PN532 sketch, here is my latest foray into that endeavor. I will tackle Micheal's 125KHz stuff too. *// Include Libraries* *#include

Tom I'm just pleased it's finally working! I thought we had a Serial only sketch that did list connected readers, or am I getting mixed up, there's been a lot of sketches! Lol! I guess modifying

Michael, Great stuff! Right, we need to know which Ethernet Shield you have bought! The sketches Tom and I have been developing on here use a Shield with the Wiznet 5100 chip. Tom already has a

OK, got it. I've been doing OOP since Simula-67 so that's a fine model for me.

Any sound decoder will require specialised hardware from the appropriate manufacturer to load sound files into the decoder. But JMRI can program the CVs of any decoder through an appropriate

This may well be because the original coding was to connect to the CS1 which did not have the alternative protocols available. It may well require modification to enable DCC mode for

I have been using Decoder Pro for some time now.? It is much easier to use when it works but lately, it is a headache. I can put a locomotive on the programming track and it will tell me the

I thought of that.? That is a good idea. -- Tom

Brian, I doubt that LogixNG will ever supplant Logix. However, Logix will probably never be enhanced. All new capabilities will be done in LogixNG. It is designed to be extended. For example,

Hi Dave, Your solution works fine it is the correct way. Thanks for your help. César En viernes, 5 de mayo de 2023, 22:28:56 CEST, Dave Sand <ds@...> escribió: César, Try

César, Try this crazy idea. Remove Invert from the linked turnouts. Set the "Continuing Route Turnout State" for CanvV6V20 to Thrown. This makes the diverging leg be the Closed position. Remove

They both end up with the same logic. Logix is a traditional function configuration (like that which used to be used in Programmable Logic Controllers). LogixNG is a language construct similar to

For a new installation, is there any reason to use logix as opposed to logixng? It appears that NG is intended to (eventually) completely supplant logix, so probably the answer is no. However I

Hi, I will try to show it by images. I have this layout. You can see the signals SAL2O( text above the signal) and S2/6 ( text next to the signal) that text is next to them. Also there is involved

César, We will need a least a picture of what you are trying to do. The best approach is to upload the xml file to the group's ProblemsBeingWorkedOn file folder. Dave Sand