开云体育

Frank, I have always extended the LocoNet side so I have no experience with active extenders. From the specs it sounds like it should work. It probably needs external power at the USB adapter end.

Frank, Did your active USP create a new virtual COM port? Check the device manager; you may find a different COM port for the active USB cable. A ‘better’ alternative might be using a long LocoNet

Thanks Billybob...I don't know what I don't know!? Thanks to you all, I'm learning!

Thanks Ken...I was doing some research on Mike's website.? WOW a REAL machine would be great! ;-)

Hello, I use the Locobuffer II USB.? The product has worked with my RR and computer for a long time, and with a 10' USB extension as well. I've moved the dispatch computer to another room so needed a

What would be the easiest way to change the type of car delivered to a location without using the schedule feature. Possible need would be delivery of equipment.that may occur once or twice a year.

Back again...? None of the suggestions changed the behavior. Ironically, printing a Build Report from the same menu prints fine - multipage. Manifest report, in portrait mode and same printer

Adam/Ken I know this thread has gone quiet but that's because I am in the middle of putting all the good help that Dave Sand has provided me with to my main layout, including how BR2003 can reflect

Ken, There are several things going on. The BR signalling regime has changed over time. Today, as you say, the signal head has several lights (2 to 4) and presents an aspect which talks about the

Adding a 12ohm resistor in SERIES with the track circuit being used for programing a loco will reduce the voltage at the decoder (presumably because "PowerPax" has higher output voltage than the

1 – do you have the correct decoder selected ? 2 – do you have an up-to-date copy of JMRI ? The ESU function mapping has been extensively improved over the last few years. If it really is a

Found it, pressing F2 for 15 seconds on my UT4 works. But anyhow i would like to have it mapped... Sent: Saturday, December 28, 2019 6:52 PM To: [email protected] Subject: Re: [jmriusers] Function

/On 12/28/2019 9:46 AM, Michael Kreiser wrote:// / ??? Old brain so don't remember exactly but it's in the manual. -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, SPROG,

May i ask how? Sent: Saturday, December 28, 2019 6:44 PM To: [email protected] Subject: Re: [jmriusers] Function mapping on ESU V4

/On 12/28/2019 9:37 AM, Michael Kreiser wrote:// / ??? You can change F2 to latching!;-) -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, SPROG, JMRI User NMRA Life member

Guys, i installed an ESU 21 pin non sound decoder in my Scaletrains SD40-2. All works fine, the only issue is that the class lights are on F2 which, since i use a digitrax system, is only activated

Thanks gentlemen. I guess I was lucky upgrading the way described.

Jay, An alternate approach is to use the recently introduced CTC support in JMRI. This was migrated from a Jython implementation that has been used for the last 10 years. The author is a regular

Jay, You don't have the time. I say that because....If you did you would have written it yourself in the first place. Sometimes we do things for a reason (without being fully aware) Once the bulk of a

Steve, Paragraph 1, sentence 2. Dave Sand