开云体育

Thanks Bruno. Your earlier question - From where does JMRI get this ttyACM0? ?- that is how the newer Lenz USB appears on the RPi when you plug it in. To make the autodetect work a bit smoother,

Screensaver mode issue may indicate that a computer power-saving feature is one element that is causing the problems. If the power saving feature also powers down USB devices (including the Sprog),

Chuck, ?Make sure your PR3 has the Version 1.0 firmware update. It contains a fix for using the PR3 on 64-bit OS's. HTH, Steve "Breezlys"

Donwload links now OK. Thanks alain

hi Paul, You're right, I should consider to make my life a bit easier and invest in the latest Lenz 23151 Ethernet-USB device and simply use the Ethernet connection. Would make my life much

hi David, That's the output I have: pi@RPi-JMRI:~ $ ls -la /dev/tty[a-z]* crw-rw---- 1 root dialout 204, 64 Jan 13 22:32 /dev/ttyAMA0 crw------- 1 root root? ? ? 5,? 3 Jan 13 22:32

Could you try again please? Looks like I didn’t wait long enough for all the various parts to get into their final places before sending out the email. Sorry for the confusion. Bob -- Bob

Hi Bob, The release note page doesn't include any download links, it just forward us to the Jenkins built (thus 4.15.3). Is that the new way to update to test versions ? Thanks and HAPPY NEW YEAR to

When you restart the pi are you using the open panel command from the panel pro menu? The list of turnouts won’t load automatically by default. If you do want this to load when you start panel pro

To explain further: The Simulator connection has been available in JMRI for along time and has rarely caused user confusion. The Internal connection type is needed for some non-connection type

Glad you were able to get it to work. Thanks for the information, it should be helpful. Of course I don’t think there are too many of the non-production LIUSBs are out there.

Test version 4.15.2 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in early Summer 2019. If you

You wrote: Reinstalling older versions will not fix your problem. The problem was caused by an issue in V4.12, but reinstalling v4.10 will never fix it. It will now be there in V4.10!!! You must

Absolutely definitely you have some Preferences->Defaults set to Internal (Bob has explained how to fix that...) or you have NCE System Connection set to "Simulator" in

Dave I memo'd a Massoth problem a few minutes ago 1/13/18. What IF I re-install 4.10 then 4.14 around 4.11/ 4.12/ 4.13? OR run 4.10 until the issue is resolved/

Have you set the “Startup” part of the Preferences to load your file? Bob

Open the preferences, then pick “Defaults” in the left to get to the default pane. Make sure that the radio buttons are selected in the NCE line all the way across, not the Internal line. Save

JMRI 4.14 Decoder Pro; worked a few months ago on 4.11/10. Not on 4.12 NCE? version newer than 2006 and it worked also w/ 4.10. Computer Dell Dimension 2400 XP?? PTB100 on program track Decoder PRO

Digitrax Empire Builder / DB150 / PR3 / Lenovo Laptop W/Win10,64bit / JMRI 4.14 / Raspberry Pi 3B / Steve Todds' image for the Pi / TightVNC Viewer. I am unable to save the lists of Turnouts and/or

Hi all Just installed the latest version of JMRI 4.14 on my new HP laptop computer Windows 10. Latest version of Java etc.I'm using a PR3-Extra and DCS51 for my Loco-net interface. USB 2.0 I