开云体育

SwissChris, 1) Be aware that Dropbox is not simply cloud-based storage. It is cloud-synced storage. Full local copies are kept on every connected machine. So you can use your layout when your

Ken was not aware of the simulator selection, but that is exactly what I was looking for.

Thanks all - I have a solution. It basically uses the steps Bob suggested above but I lacked the knowledge of how to use my HEX Events ID to create the proper LCC turnouts. the final solution involved

USBDview is included in the SOUNDLOADER 2.4 download.? it is in the Utilities folder? of Soundloader v2.0 USBDVIEW uses a file called USB.IDS to supplement device info. The PR3/PR4 will not be

To all who commented and who were interested . I ran the firmware update for the Digitrax PR3. with the DigilPL Software, following the instruction.The process went as described, with the exception

I edit JMRI on my main computer up in the house. I have a networked drive attached to my homehub, and can be accessed by any domestic machine. My railway is in a garden shed where I have a PC with the

Hello When making sections be consistent in all things. Keep the fwd & rev direction consistent. If you have 3 blocks a,b,c and 3 sections 1,2,3 then section 1 has block a, with entry from block b

I have been working with operations pro, getting info entered. Routes are move well for awhile stop make some adjustment and continue for a bit, stop and so. Just recently I made a few adjustments and

There's a nifty little freeware program called?USBDeview.? - USBDeview is a small utility that lists all USB devices that currently connected to your computer, as well as all USB devices that

With Dropbox, there's no problem having panels, throttles, tables, even roster entries open at the same time on different machines. I'm often in that situation. You can't corrupt files because Dropbox

Steve I concur I was on the Digitrax website this morning and saw the available firmware update for 64 bit. This will be my next step to try: Carefully, so I don't turn my PR3 into a paper

Very very very alpha, but it seems to all be working, but by no means is this done, debugged, or something to brag about (for example I just hard coded 6 sensors in the s88 code, vs. making it much

Hi Tim, Fix coded, tested and uploaded for peer review as add-on to something with similar scope?https://github.com/JMRI/JMRI/pull/6442 Will post a link when there's a release available to test this

Ok so I have followed a couple how-tos to get the automation working right and I cannot for the life of me make it work and it is really frustrating me. This is my test system for the tech I want to

Thanks very much for the help guys. Everything is working as advertised now and I have saved your comments for future reference.

Just don't have both the laptop and the desktop playing around in the " shared files "? at the same time or something will give. Marc

Hi Tim, Yep, it's the feedback column which is used for the known state, I always forget to mention that bit! No issues with using sensors for turnout feedback, I use turnouts with 1 sensor feedback

I recommend Dave Heap's Dropbox solution, works great for multiple computers. Very good instructions in the JMRI help library Stefan -- Stefan Bartelski Home layout: The Blue Ridge Line, an HO

I had posted my experience of adding JAVA, JMRI 14.4 and a PR3 to my wife's 64 bit HP machine just last night. Her HP had never seen JAVA, JMRI or the PR3. I removed the posts as I felt it would not

Craig, So the turnout System Names will start with "NT..." Your turnouts will be saved into the panel. But opening the panel will not make the tables visible. Suggest you set "Open Turnout Table"