开云体育

A lot how you want to use a panel determines which editor is the better fit. Having more than one pane, using different editors, isn't unusual. Some use drawings or even photos as background and then

Whurry, Yes, JMRI uses a separate prefix to differentiate items on one physical connection from items on another physical connection. They are separate “System Name”s, so they are treated entirely

Ok. I was under the impression CPE would be where I'd want to build the schematic view.? Is there a component of JMRI where what I'm trying to accomplish would work better?

Quite! THAT is step one. No ifs, no buts. Wouter

The other speed have been proved to overrun the command station. Jim even proved this a couple of years ago and so we dropped the other speeds as they will lead to dropped command bytes if the command

I am planning to use NCE Power Pro for train control and a separate Digitrax Loconet for signaling.? I will be installing a combination equipment from NCE (mini panels, AIUs, etc.), Digitrax (BDU168,

Iain, The 24/0 wrap is caused by not having a defined wait time that spans the 24 to 0 time period. As indicated in the help document, this is required to prevent strange issues like you see. For your

Many people do not try to make the LE view match the physical view of the layout. Instead it is a clean 'logical' relationship of everything flatten to be more like many 'dispatcher' view of a layout.

Iain, I can only find files from the 13th. Dave Sand

Before I get too far into this drawing I thought I'd ask about viewability. We have an accurate drawing of our club layout which I placed as a background to trace in Layout Editor, I'll remove it when

Dave, I have spent many hours entering my data into Timetable for the Ullapool - Lochinver segment.? That is 5 stations and some 50 or so trains.? I have put the data file into the problems list if

Dave, Success! Power Pro command station Baud rate was set to 19.2 not 9600. program on main and programming track works. Thanks for staying with this to the end. Perry Squier Modeling the PS&N in

Mel (and others), If your new laptop accesses the internet you may want to use Dropbox to keep a backup of your files. "Dropbox protects your files by providing an off-site copy of both current and

OK.... I had to buy a new laptop last month when my desktop computer died. Good thing I had the roster saved to a desktop file. I had copied that to my desktop in my home office that I use for a "main

I'll give you a few pointers and the comment: "you only wasted time if the conversion ends up dead". And I doubt it will be a dead end. Biggest couple of questions would be what features were you

Did anyone mention reseating the upper board in the command station? Not likely but any system sitting around for a long time is a candidate for a problem with the board getting loose. While this

Ok starting to put things here https://github.com/ntableman/Model-Railroad <https://github.com/ntableman/Model-Railroad> I added the ability to send in a JSON to the ESP as a config changer…working

Hi, I have a Logitech "Attack 3" joystick I have been using successfully as a throttle for quite some time with one small exception. The horn function control always locks on/off and I have been

This leads me to suspect the driver for the Prolific cable. Prolific had a lot of problems with their chips being second sourced by chip foundries, and then selling them as original Prolific chips

I'd suspect a failure in the Prolific Cable electronics/9pin plug or the Command Station connection gone dodgy, as Marc said. If you've covered all other bases: - Run my Terminal command and ensured