开云体育

Scott, Thanks. All good tips. I appreciate the info you have been sending me.? I will be using some of these as I move forward.? Paul D

Got it... the MQTT topic is like this: /trains/track/turnout/1 where 1 is the address of my turnout. Now what I really need is for mqtt to be supported for sensors/block detection. Anyone got this to

Group: Here's the Pacific Southern system... The railroad is a large 40'X100' 2.5 times around (over 600') loop/staging to loop/staging with a cutoff to simple single loop. We have had been running

If you purchase the preconfigured memory card from Spogg they have upgraded the USB firmware and pre installed JMRI Regards Peter

Has anyone been able to get this to work? I have MQTT broker set up on localhost:1883 and I can pub.sub from all sorts of devices, so I know my infrastructure works. But I try to pub to /trains/MT1

Happy to communicate.? I doubt anyone on here wants to see this stuff, and I cannot add diagrams or pictures.? If you wish I will sent this stuff via mail - mine is iain at iandjtolmie dot com if

Hi I would think the Rasberry PI would handle it. Everything is going through Serial/USB so that will slow things up a little. JMRI would have to be set up correctly. Look at youtube and you will find

Hi Iain, Your system sounds interesting. ?I was using routes to set up the various routes and signals, my frustration is that the signal masts on the panel are just dumb. ?Would love to see what you

Dennis, I'd question the 'headless' in conjunction with '?a large HO layout with automated trains'. ?It also depends what you mean by automated trains. ?E.g. is it just the control of the train

Hi Paul Now that you are ?understanding the program better I thought I would throw in some real life scenarios to help you?set some?guidelines for Building Trains. * Give your spurs time to load or

You should be able to make a network connection (i.e. Cat5 Ethernet cable) from your Mac. See http://jmri.org/help/en/html/hardware/digirails/index.shtml But I haven’t done it myself. Bob

Dan, Thanks. That is exactly the type of info I needed. The bulk of my cars will move with a purpose and some are in dedicated service for a specific type of load. I know how to make my loaded cars

Is it possible to use JRMI by connect my Mac to the DR5000 with a USB cable or CAD5 cable? ?The instruction I found are to use the wifi network but then I can not use the z21 App on my phone. Thank

John, Attachments are removed from emails. For images, such as screen shots, you need to upload them to the group’s Photos section. File sharing is done by uploading files, such as a panel xml file,

Dennis, Using Dispatcher and auto engineers I can run 7 trains on a Pi3, at any one time 3 can be in motion, and the others waiting, so 7 evalutions take place on a sensor change. That is with full

I’m using an RPI3 for layout control, no issues with horsepower so far. I’m taking a slightly different approach to automation though……automatic stopping of trains at signals is using

Paul, The program works in two ways, random movement, or with purpose.? Cars with "E" or "L" default loads move randomly.? This is the simplest approach, the program finds a car, and then finds a

Dave Thank you for the reply I'm sort of lost and may need to try one of the many options If it helps at I have created a non working CTC panel in Editor, copy of panel Plus close up of model board

Thanks!

Ken, Finally figured out how to properly add a turnout in PE/CPE thanks to a tutorial I found on line. As a result, I can add a double crossover in PE then convert the panel to CPE. Just dig a quick