开云体育

flakey means when i first hooked it up, it worked fine and i made trains move with a jmri throttle. for comfort, i rebooted the pi and then it did not work. not the normal "missing serial port, here

Phil, If you have a train on each track in staging, you need to either add another "virtual" empty track in staging for the train to return to. Or change the build mode to "Aggressive" and select the

Here is how I solved it where the length of the track is limited and so the switcher could not put cars back on the track until I added another track the same length. This is a separate location (Red

Hi Phil, I'm just finishing up programming my newly expanded layout and have run into that problem. The cause was the staging track is not freed until the current train is terminated. I had the train

Thanks Dave for sending the panel back to me, i managed to run it in "offline" mode but as soon as i changed the dispatcher settings to My layout i got the same problem. Looking at the connection bit,

I am transitioning from car card/waybill car forwarding to JMRI generated switchlist. The standard gauge portion of my layout is a switching layout in which trains enter from staging heading to a

Hi Dave,? Just to follow up, i have tried to follow the same, delete everything let JMRI auto allocate signal paths / sections & also doing it manually, etc etc but it seems to get stuck on the same

I have used both advanced and command station consisting in the JMRI consist manager. I'm not sure about the hard consist method. I did some trouble shooting with Steve Todd. The native JMRI throttle

Hi All, ? I am a relatively inexperienced Decoder Pro user. And I have a challenge that I would like to overcome.? I am sure there must be a simple fix for this but I cannot find it.? About 6

After all that, I had to look up T.L.A., which was a bit of a D.'O.H. Wouter

Hi If you are going to use the autoallocate feature of dispatcher then the use of auto generated sections and transits can lead to failure in any situation involving single track two way running, safe

Hi! Another question. Did you consist them in JMRI? The "Hard consist" method? That is what I have been using. There may be an issue between JMRI & Engine Driver. I can't test that right now, my test

Just a note ?- it may be helpful to go to the protothrottle.com web site and watch the videos, and download the manual. The PT was developed as open source. There is a link to github where all of the

Tim, SML is signal mast logic. I always use automatic discovery. I then test using simulated occupancy sensors and manual turnout settings to verify that the logic is correct. The most likely failures

The thread has been informative and I appreciate folks responding back to me.?? A couple of thoughts: 1)? I concur, there is no need for a decoder specific version of the app;? any remapping of

I've uploaded Launcher Log and another file with all my iMac system info. My current panel size is 1.3 MB and growing. Spuds, I've never heard of Garage Collector. This is a post from David Parks made

Group: I just went through an assortment of USB/232... All worked with the Pi but only the generic FTDI based one was picked up by the auto detect feature in Steve's RPi-JMRI distro. Generic, Aten

Java is hitting it's (self imposed) memory limits. I'm wondering how big is your panels, on disk? Is it really supposed to be using internal, ie not-physical switches? Why the Garage Collection is

You should always dispatch a loco, stealing is bad. :) Is your phone connected to the same wifi Jmri is, and as such using withrottle, or on the lnwi's private wifi, and as such talking to it? I

Hi Dave, Thanks for this, to be honest i thought i had gone through that process of getting each section right but its a bit of a steep learning curve, been at this for all of a week now! I will look