开云体育

Rodney, Wow, thank you for this, I will put this great advice to use immediately! I didn't realize I could change that within CATS - I thought I had to do it in the JMRI SE8c interface. I absolutely

Is there a way to program a function key to control volume?

I'm not party to to inner working of frog juicers, but it seems to me you can't suddenly limit the current to less than the offending locomotive needs, or you'll have an operating hiccup. Andy

Hi, I think I have found what could be a bug between 4.8 and 4.9.1. It will only show up if a new user is installing a new copy on a Windows 10 computer that has never does not already have a copy of

Sam, Most thumb drives have low read/write speeds. You would have to monitor this using the task manager or other tools to see what speed you are getting. I would not suggest that configuration.

Scott, Inspect the console log to see if it provides clues. I can't remember when, but there was an issue with the storing of the node configuration data and that may need resetting. With the latest

Hi Sam, When you say "all data is stored in thumb drive", do you mean that you actually installed JMRI to the thumb drive? If so, then as Dave H already explained, that is most likely the cause of

Thanks Nick. I do have an SMINI but haven't installed it yet. This is just one SUSIC with 24 bit I/O cards which it appears doesn't care what is started first. I'll remember this though when I get

Bob, I believe the problem may lie with the initialisation . The SUSIC is set up with 24 bit cards in the following format:- OOOO OOII IIII My interpretation of the initialisation sequenece is ua=0,

Thanks Bob I have done a little Python Programming and will have a look. Peter

If you have installed the JMRI software on a thumb drive rather than the C: drive, that will cause a massive performance loss. Thumb drives are incredibly slower (10-100 times slower) This will affect

I'm having the same issue as well. Wonder if it is a Java thing. I had one of the 4.6 variants installed on my current machine and it just took for ever to do anything. Opening and closing. As a

Wow, that was quite the reply, thanks. I'm running a newer HP machine windows-7 3.3ghz 4 gig ram, loading takes a lot longer than that, saving preferences as an example, lock up the program for up to

Thanks for the response- Yes, i got a newer HP machine running (7) 64 bit and 4 gig of memory 3.3ghz processor. Runs everything else fine, but I found that especially when I change preferences and hit

I think you are onto something as I think Java has a problem on my computer. I'm going to follow your lead snd see what I can come up with Thanks for the heads up Cheers, Richard Sent from my Verizon,

Ken and Richard, I ran the JMRI InstallTest and discovered that there was an error with Java. I tried updating Java from the Start window but it - along with any of the Java programs - would not even

You can get a signal to JMRI by replacing the indication LED with the input side of an optoisolator, connecting the other side to whatever electronics you use to get inputs. The 6N137 is a convenient

If you are running DCC and have a crossover across three tracks with points/switches on the two outer tracks and a crossover in between then if you trace through the rails you should find that the two

No problem. What brand and model of DCC system are you connecting to, what computer will you run JMRI on, and what interface will you use between the computer and DCC? I use one of my my $9 computers