开云体育

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the jmriusers group. File : /ProblemsBeingWorkedOn/testjunct.xml Uploaded by : johnpw22

Thanks Steve,?On my way to pick up a New power supply! Sent from Yahoo Mail on Android

Hi Joe, Re 2): That is completely normal. Every decoder/gears/engine combination is unique - even when the models are the same and bought the same day. Wouter jmriusers@...> wrote:

John, The 308 indicates that when the PR3 sends a programming command, it isn't hearing an acknowledgement back from the decoder. There are two likely causes. One is that there's a bad connection

John, If you upload your panel xml file to the ProblemsBeingWorkedOn area, I can take a look at your issues. Dave Sand

Ken, Peter, Maybe Peter is referring to the destination drop down box after selecting Move. If there are no entries with an empty user name, that box will be empty. It takes extra effort to create a

Good morning all,Recently installed a wow 121 kit into atlas locomotive.?Started programming with Decoder Pro, ?some ?CV'S program with no problem, ?others don't seem to take programming?I.e. I

Dave/Bob and all. Problem resolved thank you - though I am not sure what the exact problem was in the end. ?I spoke to the supplier of the USB interface who asked what the address was of the Procab.

Peter, I'm on Win10 and I just right-click on the user name and I get the drop down with choices like 'move'. So I'm not sure why you would not be getting that. You already have usernames assigned??

The EB1 will not have any effect on JMRI. It would assist us greatly if you were to restart JMRI, try to use a JMRI throttle, then go to the Help->System Console Menu item from the main DecoderPro

The check marks are intended as an aid to manipulating a speed curve to achieve a desired result and are not stored in either the decoder or the roster entry. -- Dave in Australia

Bump. Any takers please?

Andrew ( and Dave), I think I am the person you are referring to. Apologies for not getting my act together to inform you Andrew how I did it. Thanks Dave for what sounds like an exciting extension to

Hello Bob - thanks for this. You are correct - therre is a communications problem between JMRI and the layout; I have bypassed the EB1 and the problem remains. ?I can see nothing wrong with the

Hi Ken I am using 4.7.6 but if I try to move a Signal Mast or Head I get no drop down menu (such as I see with sensors or turnouts). Is this just me or is this a general problem? Thanks Peter Damp

After numerous email exchanges I was eventually able to get the following system log from George, who was sending other emails to me as well as the ones he sent to the list. As I am not personally

On the PR3 have you held down the button until the light winks? That is programming mode and the 306 should go away. David Klemm Sent from my iPhone 7 Plus ________________________________ Sent:

Funny thing, I just tried this on my Mac & it doing the same thing. My iMac is running OS X 10.11. I am running JMRI 4.7.6. I moved this off of my Win 10 machine, it was working fine. I am hooked to

George, Looking through the post the type of command station is not mentioned. What command stations are you using? and what is your configuration. PR3 and programming track Command Station

The next JMRI version will have a fix for this. Bob -- Bob Jacobsen rgj1927@...