开云体育

On Thu, 23 Jan 2025 Peter Ulvestad wrote: I believe the rev-N were the last before being replaced by the LB-NG. They had version 3.00 firmware. I have an older LocoBuffer-USB with version

I suggest going back to even more basic stuff... 1) Start from the factory-reset decoder, with address 3. 2) Put loco on programming track, and read the loco's address using JMRI, this should be

Vimal In simulation mode the panel works well, and after stopping the trains from B9 ClockWise and B6 Clockwise. they restart perfectly. When the train reachs the end THe train status goes to "Done"

Dave, There was a firmware update that dealt with this. Check your version via the CMD STA option in the cab. The Dec 2023 date has the bug. There is a way to get the update and download it but it

One of mine is 2.040, the other is 2.070. The 2.040 is rock solid and used most days, the other is spare and used less frequently, and had occasionally been weird, as in won’t work and then

Martin, One way (not necessarily the only nor the best) would be to use the "Random" feature within the train's route.

Scott: No worries! ? I should have mentioned that in my original post since I’d seen other posts where folks had tried to use the USB adapter with a PH5. My only available connection in JMRI

I presume that as well as changing the long address in JMRI you also made sure the setting to use the long address is also checked?? What value do you have in cv29?? Phil G

Sorry - I guess I misunderstood.? I thought you were using a USB Interface board. Are you sure you are using the correct port in the JMRI Preferences - Connections?? To be certain view the

Yes. The PH5 is connected directly to my computer via USB A/USB B cable. Dave Sent: Thursday, January 23, 2025 1:29 PM To: [email protected] Subject: Re: [jmriusers] New PH5 with USB "B"

I assume the new NCE PHP is similar to the older models in that it has an interface built-in - just in this case the connector is USB not Serial.? an NCE USB interface will not work with a

Good day all! Bottomline issue:? JMRI “sees” the AIU but AIU data is not showing up in JMRI. My apologies if this has already been hashed and rehashed multiple times, but I have plowed through

Thank you Steve, I did read Nigel's post above and taking the short address 125 Digitrax it as 0125 so I then moved onto giving my HST, 1125 and JRMI, still left my HST, as a non runner so having to

I do wish CPE provided grid lines! -- H.O. Australia (Layout in Progress) Digikeijs DR5000 LocoNet JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG Java: OpenLogic jre-17.0.12.7 ? Windows 10

I am progressing on my Operations Development.? I have all cars and trains moving around properly (no build errors).? ?So now I am trying to balance out movement between tracks at different

I believe the rev-N were the last before being replaced by the LB-NG. They had version 3.00 firmware. I have an older LocoBuffer-USB with version 2.040 firmware that is working with current JMRI

I have uploaded my layout file (folder: Vimal Parikh/scenic_ridge.xml) Thanks for your help. Update: ?The transits run file except that when it ends, the last section remains in FORWARD state and

Ok well that's promising. Not sure why this is the 2nd time I'm having an issue with this but I'll try it again. Thanks Nags.

Did you not read Nigel's post to this thread that explains the issue? ?/g/jmriusers/message/238873 You are trying to program an address that is invalid with your DCS52. Nigel's post

Mick and John. What version are your LB-USBs? Ours is Rev-n. It came with a manual dated October 2014. It's not much of an issue for us because we only use it for WiThrottle and won't need to update