开云体育

John, Some additional details. The previous serial library, purejavacom, had a process to find device names that started with a set of prefixes, One of them was ttyUSB. For technical reasons, a

It’s a bit brute force, but you could write a JMRI script or LogixNG that calls your .bat file every four seconds. Bob — Bob Jacobsen rgj1927@...

When I run it from windows it continues to take a screen shot every 4 seconds until I close the DOS window but when I run it from Bob's script it takes 1 screen shot and ends.

*I* know nothing about poll_usb.sh -- where does this file come from?

Attached .bat renamed.txt It takes a screenshot every 4 seconds.

Do a Google search for your particular OS version. Win+ PrtScr is one suggestion for windows Alt+PrtScn works for me in Linux Mint -- Peter Ulvestad JMRI Users Group Moderator (

Hi, How can i get screenshot of my JRMI screens (Shift + Ctrl + S doesn't work) ?

Hi, I am new to JRMI. Do you know if there is somewhere (Web, PDF, video) a place to get information for about aytomation using warrants, but a very simple example?

Vinny, Can you show us the batch file you are trying to run? Daniel

John, I am not sure that this is the official method but it does work. Copy the jmri.conf file from the JMRI install to ~/.jmri. Edit the file and add the serial port names. If more than one,

Robert, Followed your instructions to reload ("sudo udevadm control -R”), it gives me the same results, which appears as I had before. This isn’t a new issue, after replacing the PH-Pro adapter,

Vinny, You can use an indirect notification from Windows using the LogixNG "File as flag" expression which can then run the Jython script. See

Vinny, You cannot call a Jython script from outside of the JMRI/Java world. It would be helpful to know what you are actually trying to do. What does the bat file do? Dave Sand

Jim, If you feel more adventurist, you can download a nightly build https://builds.jmri.org/jenkins/job/development/job/packages/ which already has the fix. I use these all the time. -- Peter

...rephrasing, how can I call a jython script x.py from within a windows/DOS batch file?

Well, that did not work. What about this... how would I call the jython script from the command line? That would solve this for me.

Hi En-TACT. As Ken has suggested, the LEDs on the USB Interface blink briefly while there is communication, on steady, you have a problem. Please install ALL the USB Interface Jumpers, see Dave

Dick, I understand what you are saying. Since I have not read enough about SML and what prototypical scheme I would want/need to use, I will stay with SSL for now. I've gotten it to work albeit

Hi Dave Thanks for your great analysis and suggestions, all of which I will follow. I used the 400 series for the blocks and the 50 series when I made the turnouts their own blocks. After I make all

Ken, Your last upload was good. I have some initial comments. LT1 is a left hand turnout, but you want the diverging leg to be the normal route. In Layout Editor this is done by using the