开云体育

As well as checking the part, also look at the version of your DecoderPro/JMRI. The loco you have may be newer than your DP version and do can’t be expected to know about it. Current JNRI is 5.2 or

I haven’t used my programming booster in years. ?With newer decoders, i get better results without it. ?As others have said, let decoder pro read the decoder through a roster add and then look at

If you are looking st ESU equipped locos and want to change sound files, then you will need an ESU LokProgrammer to change the sound files. ?As well, some of the paging for CVs in ESU decoders gets

FWIW – some decoders use the speaker as the load for CV read back. IIRC, the Tsunami uses the speaker; I’d expect the Tsunami 2 to also use the speaker. Ross Sent: Saturday, May 6, 2023 2:12

I would suspect that what you thought you read is actually rubbish. If the description of your setup is correct, you cannot read cv values. You can program on the main, but the program track won't do

Check the part number on the decoder: Tsunami: TSU-21PNEM8 | 885809 Economi: ECO-21PNEM | 882006 -- Ken NYNH&H, Old Colony Division, Cape Cod Branch (1949-1959) [DB150][PR3][QuadLN_S][JMRI 5.3.5]

*MIGRATION TO RFID4MMR* Guys I'm thinking that we may be trying the patience of our Moderator, who has been very patient with us thus far. As we move forward with this project, we will necessarily

Tom Thanks again for the latest PN532 Serial/Ethernet sketch. I will give that a go later. MQTT eh? I've not really investigated this much, does it offer advantages over Serial or Ethernet? Good

Wilks, You need to connect up the actual decoder you want to use and let JMRI identify it. That will test your programming "system" from end to end. As Wouter said, you need the motor connected so

The box says Tsunami 2 while the sheet enclosed within the box says Econami. The Athearn parts list shows it had an Athearn Quick Plug that either has an 8 or 9 pin plug. I don’t think that there

If DeciderPro can’t tell the difference, then the cvs it’s read aren’t telling it enough information (or more likely SoundTraxx don’t provide enough information) to tell them apart Do you

I did a decoder read and it gave me multiple possible types, how would I find exactly which one or does it not matter? -- Cheers, Wilks

I just purchased a new Athearn RTR SD40-2 that came with a Soundtraxx sound decoder. When I put it on my stand alone programming track which is connected through a Sprog 3 to my computer and go into

Decoder locked? Mick ________________________________ Mick Moignard m: +44 7774 652504 Skype: mickmoignard The week may start M,T but it always ends WTF.

Reading will not work without the motor load. Wouter [email protected]> wrote:

First, do a read type from decoder to get the correct decoder definition. This might be so old there is not a proper set of features in the decoder. Early decoders had some odd feature sets before

MFRC522, Ethernet/Serial, Nano/Uno/Mega, MQTT??? Guys, Yeah, you read that right! I have been playing around a LOT with MQTT lately and getting stuff to work with JMRI. So this evening I decided to

Hi all, First post here! I just need some help with how to properly identify a sound decoder, using JMRI connected to a DCS52. I tried to find PCM decoders on JMRI but couldn't, and the closest thing

Usually, from the throttle type (one hex digit) and from the throttle itself (the other hex digit). Some older throttles have rather limited values, while others provide more variable throttle

On 3/15/2023 3:36 PM, philip8944 via groups.io wrote: > On startup the system repeatedly attempts to throw 2 turnouts.? ive deleted the turnouts but it does the same thing with two more.? the