Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Jmriusers
- Messages
Search
|
Locked
Re: XL Systems Inc.
Searching within eBay for "ho dcc sound decoder with speaker for proto 2000" hits a bunch of these with different form factors. All about $30-$40.?
Going back to my original question, does JMRI support XL decoders? ? |
|
Locked
Re: CanExample.py
Thank you, Wouter, for your intervention. However, the topic may be closed now as far as I am concerned.
Bob, Paul, You should have left me in ignorance, a bliss. The more I have learned on the theory of sending Z21 CAN messages the more I don't understand - my fault, no doubt about it - hence I had better not ask any more question. Paul, you were advising me, on practical grounds, against using such messages in my present problem, anyway. Nevertheless, I am grateful for all your information. Gabor |
|
Locked
Re: XL Systems Inc.
¿ªÔÆÌåÓýHmm, different seller to the previous item number, and it is a different item to the previous one as well. ? As to the epoxy covered blobs, Chip On Board (COB) is fine if done correctly, and is especially useful if putting a chip with a lot of connections in a small space. ? ? ? From:
[email protected] <[email protected]> On Behalf Of
Richard Stern ? It was relisted.?233324627381 |
|
Scott,
toggle quoted message
Show quoted text
You will need to use the 4.17.3 test release to run CMRI at speeds other than 9600. Dave Sand On Aug 28, 2019, at 8:39 PM, Scott Pandorf <spandorf55@...> wrote: |
|
Locked
Re: Help with JMRI and Digitrax PR4
Rich,
I'm not near my layout computer so I can't check the other settings, but the COM port depends on what Windows has assigned. Open Device Manager, expand the ports section, and plug/unplug the PR4 into the SAME USB port.? The COM port number that comes and goes when you do that is the one to use. Also, I've found that sometimes I have to "reset" my PR4 by removing the USB and power, letting it sit for maybe 30 seconds, then plugging everything back in. That seems to fix the occasional flakiness (which is triggered by, as far as I can tell, by switching between PR4 modes of operation). HTH, Steve "Breezlys" |
|
Locked
Re: XL Systems Inc.
I'd stay far away.? Googling the UPC they have listed turns up an MRC decoder with a different form factor. Something's definitely fishy...
Steve "Breezlys" |
|
I am running JMRI on a Windows 10 machine talking to an NCE system (9600 baud), and CMRI (19,200 baud).? Although it's not clear to me that there is linkage, I recently upgraded to JMRI 4.16, I didn't notice immediately but a couple of days later it became obvious that the CMRI wasn't initializing.? I checked the serial interface, even purchased a USB to RS485 cable in case my Chubb RS232 to RS485 converter card was the source of the problem.? Nothing worked, then I looked at the JMRI log (except below):
2019-08-28 18:32:15,741 util.Log4JUtil??????????????????????? INFO? - * JMRI log ** [main] 2019-08-28 18:32:15,787 util.Log4JUtil??????????????????????? INFO? - This log is appended to file: C:\Users\scott\JMRI\log\messages.log [main] 2019-08-28 18:32:15,787 util.Log4JUtil??????????????????????? INFO? - This log is stored in file: C:\Users\scott\JMRI\log\session.log [main] 2019-08-28 18:32:15,803 apps.Apps???????????????????????????? INFO? - PanelPro version 4.16+R6f9aced starts under Java 1.8.0_221 on Windows 10 x86 v10.0 at Wed Aug 28 18:32:15 EDT 2019 [main] 2019-08-28 18:32:23,897 apps.Apps???????????????????????????? INFO? - Starting with profile WVOMCMRI.3f24bebf [main] 2019-08-28 18:32:24,100 node.NodeIdentity???????????????????? INFO? - Using jmri-jWj6rcoHWhNiaaabL3psy8-3f24bebf as the JMRI storage identity for profile id 3f24bebf [AWT-EventQueue-0] 2019-08-28 18:32:24,412 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "C/MRI" [main] 2019-08-28 18:32:24,944 serialdriver.SerialDriverAdapter????? INFO? - COM6 port opened at 9600 baud with DTR: true RTS: true DSR: true CTS: true? CD: true [main] 2019-08-28 18:32:24,991 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "NCE" [main] 2019-08-28 18:32:25,819 serialdriver.SerialDriverAdapter????? INFO? - NCE COM3 port opened at 9600 baud [main] 2019-08-28 18:32:25,928 nce.NceConnectionStatus?????????????? INFO? - NCE EPROM revision = 6.2.1 [AWT-EventQueue-0] 2019-08-28 18:32:28,741 util.FileUtilSupport????????????????? INFO? - File path program: is C:\Program Files (x86)\JMRI\ [main] 2019-08-28 18:32:28,756 util.FileUtilSupport????????????????? INFO? - File path preference: is C:\Users\scott\OneDrive\Ohio & Mississippi\WVO&M\ [main] 2019-08-28 18:32:28,756 util.FileUtilSupport????????????????? INFO? - File path profile: is C:\Users\scott\JMRI\WVOMCMRI\ [main] 2019-08-28 18:32:28,756 util.FileUtilSupport????????????????? INFO? - File path settings: is C:\Users\scott\JMRI\ [main] 2019-08-28 18:32:28,756 util.FileUtilSupport????????????????? INFO? - File path home: is C:\Users\scott\ [main] 2019-08-28 18:32:28,772 util.FileUtilSupport????????????????? INFO? - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main] 2019-08-28 18:32:29,741 PanelPro.PanelPro???????????????????? INFO? - Main initialization done [main] 2019-08-28 18:32:39,037 withrottle.FacelessServer???????????? INFO? - Published ZeroConf service for 'west virginia ohio & mississippi._withrottle._tcp.local.' on 2600:6c4a:417f:f396:4015:7731:a9ce:b142:12090 [WiThrottleServer] 2019-08-28 18:32:41,819 withrottle.FacelessServer???????????? INFO? - Published ZeroConf service for 'west virginia ohio & mississippi._withrottle._tcp.local.' on 2600:6c4a:417f:f396:b4e0:18a:cb98:73f9:12090 [WiThrottleServer] 2019-08-28 18:32:44,475 withrottle.FacelessServer???????????? INFO? - Published ZeroConf service for 'west virginia ohio & mississippi._withrottle._tcp.local.' on 192.168.1.146:12090 [WiThrottleServer] 2019-08-28 18:32:47,194 withrottle.FacelessServer???????????? INFO? - Published ZeroConf service for 'west virginia ohio & mississippi._withrottle._tcp.local.' on fe80:0:0:0:b4e0:18a:cb98:73f9%eth1:12090 [WiThrottleServer] 2019-08-28 18:32:49,803 withrottle.FacelessServer???????????? INFO? - Published ZeroConf service for 'west virginia ohio & mississippi._withrottle._tcp.local.' on 2600:6c4a:417f:f396:d51d:12e3:1d0c:d14:12090 [WiThrottleServer] 2019-08-28 18:32:49,803 withrottle.FacelessServer???????????? INFO? - Creating new WiThrottle DeviceServer(socket) on port 12090, waiting for incoming connection... [WiThrottleServer] Note that COM6 was opened at 9600 baud, now COM6 is the new USB cable and was set up at 19200 baud and the setting in JMRI is 19200, however JMRI is insisting on opening at 9600.? To test I set all my CMRI boards and COM6 to 9600 baud and the system does initialize. Anyone have an idea why the setting of 19200 is not being honored? Thanks for your help, Scott. Scott Pandorf Ohio and Mississippi Railroad |
|
Locked
How do I delete simulation panels?
How do I delete panel files from panel pro?
I have JMRI v: 3.10 installed on an HP Pavilion running Linux Mint 17.2. Setup in simulation mode for NCE and C/RMI systems. A few years ago I started going through the tutorials for putting together panels. Never finished the tutorials or the sample panels. However I managed to create several partially completed sample panels. I want to clear all of these out of JMRI and start from the beginning of the tutorials, and not have so many panels on file. How would I go about deleting these files from JMRI? Thanks, Scott Thanks, Scott |
|
Locked
Re: Web Server, Panel Update for feedback
#layouteditor
#webserver
On Wed, Aug 28, 2019 at 05:24 AM, Dave Barraza wrote:
Here are links to the videos you requested.Dave,? Thanks for the videos. I tried the same turnouts you were toggling and the web panel works for me if I enable the proper sensors. Hopefully the upgrade will help, I don't recall you telling us what version of JMRI you were on. Regarding the NX prompts, the current web code doesn't come close to supporting something like that. Sorry. --SteveT |
|
Locked
Re: Web Server, Panel Update for feedback
#layouteditor
#webserver
Don, you may have posted into a previously running thread.... but what you propose sounds like a reasonable approach to update an air-gapped Rpi.
|
|
Locked
Re: XL Systems Inc.
Any decoder with a blob of black epoxy I stay away from.
toggle quoted message
Show quoted text
Learned that in my early days of DCC. It's cheap for a reason. John ---------- Original Message ---------- |
|
Locked
Re: Web Server, Panel Update for feedback
#layouteditor
#webserver
Thanks, Steve.
Looks like it's time to update! |
|
Locked
Re: Help with JMRI and Digitrax PR4
Rich S
Hello Group, I'm still having problems with my PR4. After a day of JMRI and the PR4 working correctly I'm now back to square one and not able to read read or write to any of my decoders. Someone suggested I try a new PS14, but that did not fix the issues. Can someone please tell me what their current Port Settings are for the PR4.
My Bits per second = 57600 Data bits = 8 Parity = None Stop bits = 1 Flow Control = Hardware? The advanced settings for FIFO Buffers box is checked and both sliders are set to high with the Com Port Number set to COM 3. Are these settings correct? Thanks in advance, Rich S.? |
|
Locked
Re: XL Systems Inc.
Here's one item number I found 123885233171 Not impressed.? On Wed, Aug 28, 2019 at 5:03 PM John <jonie41@...> wrote: Might help if you posted a link to the item on eBay. --
John Griffin? ? ? ? ? ? ? ? ? _______________________________ If today was your last day... |
|
Locked
Re: Virtual Sound Decoder - Clicks on looped sound files
I just found this site.? I was working? on VSD last year and made great progress and am getting ready to go at it again this fall and winter.? I have some 20 files, diesel, electric and steam; all based on the framework of the original vsd files.? AND I also have clicking on looped sound files.? Not with bells, whistles, etc. - only with the "idle" and the notch sounds.? ?I circumvented this problem on the electric locos by not using the motor file(s) but instead using a blower sound relabeled as motor.? As I understand it, electrics don't notch.??For diesel and steam I stuck with the original vsd files, adjusted the notch points and added different bells, horns, pumps, etc.? If interested, I can hopefully find my computer notes and give a detailed report on my method.? I use SPJHelper, WavePad Sound Editor and XML Copy Editor to obtain the wav files and manipulate the vsd files.? All wave files are PCM, uncompressed, 11025 Hz ?sampled?, 8 bit, mono.?
Looking at this thread I don't think the problem was solved.? However, VSD is very good (sans clicking).? It's a really great way to fill the room with sound for my "hollow core door", n scale layout.? It works seamlessly with JMRI and Engine Driver.? ? Conrad |
¿ªÔÆÌåÓýDon, If my memory is correct, you say the command station was in storage for so time. It is the early command station - like the one I use - and I do an average of 2 installs per day. All program track programming is normally done through Decoder Pro and A Sprog 3 BUT, for many years it was just the command station. In my area and local club there are 12 Easydcc uses and most of them use the command station only. You have done a full reset, now the next step - with a small flat bladed screw driver just lift? the end of each IC on the board - no need to take them out completely and then reset them. The main processor can remain as it is. Then do another full reset and try again. The 6.29 Eprom is perfectly good. I am upside down in Australia but that should not make a difference. Gerry? ? On 29/08/2019 7:12 am, Bob Jacobsen
wrote:.
You can use the ¡°Single CV Programmer¡± tool to reading and writing very clear. As to the last question: It¡¯s complicated. There¡¯s logic that handles it based on various things. You¡¯re welcome to look at that (), but maybe this isn¡¯t something to worry about right now. I doubt it¡¯s the cause of your problems with specific addresseds. BobOn Aug 28, 2019, at 11:25 AM, Don Weigt <dweigt47@...> wrote: I'm just getting started with programming with JMRI, so not sure yet programming through it is working. I guess I need to try to change the accel and decel CVs. or others I can easily read back, and see if they really change. And, I'm still confused about reading and writing sheets and all sheets, and so on. This is quite the learning curve! A question for anyone using EasyDCC and Decoder Pro is this: What switches the Command Station between normal running and programming modes? I see commands defined to do that, but don't know what JMRI operations trigger them. Does switching to Programming Track on the Roster page initiate programming mode? Seems likely. But, what switches it back? Changing back to Edit only, or something else?-- Bob Jacobsen rgj1927@... -- Gerry Hopkins MMR #177 FNMRA Great Northern Downunder NMRA Australasian Region Contest & AP Chairman Web Administrator |
|
Locked
Re: XL Systems Inc.
Might help if you posted a link to the item on eBay.
toggle quoted message
Show quoted text
John ---------- Original Message ---------- |
|
Locked
XL Systems Inc.
I've been seeing listing on eBay for sound decoders from XL Systems Inc. I've never heard of them. Are they supported by JMRI? ? Any comments on quality of electronics or sound? ?
|
Dave Barraza
conrad
to navigate to use esc to dismiss