开云体育

Steve,Richard, and anyone else interested, I've had a chance to get this working. It turns out there is an issue in the Pi4j servo support for the the PCA9685 BUT if you use the raw GPIO from the

Steve, What decoders are you reading on the DCS52, I could not get it to work on ESU in paged mode, and thats why i think it requires testing the different decoders that are out there as well? I had

ECO-PNP is what 882004 is Dave Sent from iPhone Xs Max

Bob Dcs50, dcs51, dcs52, dcs240 all work in page and direct. Connect thru a pr3, pr4 and where applicable, the built in usb (which for the record isn't a pr4, it's not fully electrically isolated).

Which definition to use: ECO-100 ECO-200 ECO-400 Packaging only has the Soundtraxx model # of 882004. Thanks. FYI DP could not identify a Soundtraxx motor decoder. Fortunately there was a definition

Bob, I will spend my Saturday settings up some tests and documenting what works and what doesn't with the various systems and configurations that I have access too. I will place in a spreadsheet, and

I've been using Direct as my default on layouts with DCS200 and DCS51. I've not noticed any issues. If somebody has a process that is thought to break, let me know and I'll test. As age of things go,

Sorry, sent the following too soon. It’s particularly interesting to know whether the direct mode(s) work on early hardware. Bob

If people have various hardware and time to test, it would be good to take JMRI’s Single CV Programmer and try to read both CV1 and some _other_ CV > 29 with a non-zero value using each of the

Hi Dennis, You can duplicate the 4 cycle move various ways 1)schedules on cars 2)schedules on tracks 3)car types just to mention a few. I for example use car types. I have 6-40ft boxcar types. I have

Steve and Bob, Once the change is made, I can test for DCS210 (Via PR3 and LocoBuffer-USB, it has no internal USB Interface), DCS240 (Internal USB like the DCS52) along with the DCS52 (Internal USB)..

How would I use JMRi to duplicate a car move like a 4-cycle waybill?? ?I.E.? I want a specific car to be moved from location 1, to location 2, to location 3, to location 4? over 4 separate train

Since we know this affects both the DCS52 and the PR4, my vote would be for this option. Later, if anyone can confirm the DCS210 and/or DCS240 are optimized for Direct (I suspect they are but I don't

Likely this is only for the DCS52. Make a global change, and my DCS50 and DCS51 breaks. Just because it says 'Digitraxx' (Or ESU, or NCE) does not mean the new versions work exactly the same as the

Bob, I don't have strong feelings any particular way, except to avoid an overall user-settable default. See below. Some "gotchas" with Paged mode: - Many (if not all) SPROG systems prior to a certain

Bob, Thanks for confirming that this is a Digitax only issue. I understand your issue, with not being able to identify old vs new, but when it comes to the newer Digitrax CS's with programming tracks,

Ken S, Glad you got it working and thanks for letting us know the final outcome. I couldn't follow exactly what your cabling setup/

This is a problem specific to the Digitrax command stations, and not more general. The last time we looked at changing this default, there was concern that certain old command stations don't properly

No- I forgot to check the system console at the time of the error. I was also having problems with the timebase element as I had updated from 4.10 to 4.17.2 which I later realized my mistake of

Dave S, Thank you for posting that. I had missed doing the change in the sub-profile. I may go to the club just to try that. I had thought there was a way to force it to work, but couldn't find it.