开云体育

That is NOT correct - The PR4 is NOT the same as the PR3!? Although the PR4 provides (mostly) identical functions as the PR3, it is a complete redesign of the device with significant internal

Dave & John, Happy New Year to you both. Here are the results of running both "Table print DS1" and "Table print JA-DS1”. The 1 signifies that Line 2 was removed before re-running. Both files

Mark, Paragraph 6 you state you place the loco on the programming track and go to the basic tab and start writing values. Does this imply that after placing the loco on the track you did not do an

I have 50 sensors on my layout (Heatcote IRDOT). These are connected to an Arduino Mega. A number of these are not showing as Active in PanelPro although they are working properly (I have connected

I feel the need to reiterate my problem again, as we are now on the second page of this thread, Also, I would appreciate it if you have a question not pertaining to my situation that you start your

Hi Graham, Here we go ... Q1. JMRI simulator mode You can use JMRI without a connection to the layout. This is the simulator mode. I use the LocoNet Simulator

Hi John, Help is probably at hand, but nobody can do anything with a question that has almost no information.

Happy New Year, Graham! See my comments in the next post. Klaus Am 31.12.2018 um 22:03 schrieb SettleDown:

Hello Marc, I am out of town but will send this to you promptly after I get back on Wednesday. Thanks. Andrew Roberts Potomac Sound LLC PO Box 223 Monrovia, MD 21770-0223 (301) 332-6111

On approach that’s been used in the past: *) Define internal sensors (with names like IS1, IS2, IS3) and internal turnouts (with names like IT1, IT2, IT3) *) Put those into Layout Editor as desired

Don, Where does your home brew sit in the following simplified Digitrax map? While this example is Digitrax specific, the basic concepts apply to most JMRI to layout connections. JMRI <-> FTDI Drivers

Dave, My railroad interface is home brew. I'm looking for a way to map the turnouts into a few bytes of data in computer RAM, where an interrupt driven interface will write it to a board to control

I'm not sure what you are saying here. Most operators actually prefer fascia static panels with HW push buttons? The tables were temporary fix and you are going to install fascia panels eventually? In

Hi Klaus I've added more to the post above now that I've had a couple more hours "playing" VSD.? I've added further comments in the body starting with SD> Thanks for the video.? Yes, this is exactly

We have a help page for this: <http://jmri.org/help/en/html/setup/Dropbox.shtml> -- Dave in Australia

Ranges as specified by the NMRA and as implemented by various manufacturers differ: For a fairly complete list, see:

Lars, I started with an old Android tablet which acted as a "proof of concept" if you will.? I acquired a couple ~7" Android tablets from my local MicroCenter? for $30 each that were adequate (one

Jerry, My recommendation for 'off-line' work on a layout is to create a profile at the other computer that has the same connections, but pick the 'simulator' mode for each connection. It will let you

Those of you who are responding to me, please read my post here at this thread.? Information being asked in the recent posts have been answered in my posts.? Although it may sound like I am being

I want to save my macros, but the save button is always greyed out. Sent from my Xperia by Sony smartphone