开云体育

Dave, Thanks for the info on the?NCE?Clear All Advanced Consists Command We obviously don't want to execute this now that we've rebuilt all the consists after the crash, but will keep it in mind

Dan, I agree with you on the fact that the command station crashed.? Trying to think of what else was going on at the time other than JMRI monitoring turnout status (all turnouts are set to

Michael, You can upload your panel xml file to the group’s ProblemsBeginWorkedOn folder. Dave Sand

I took a quick look at the rule set. I'm surprised that it has both a 'Approach Diverging' and 'Diverging Approach' defined. It implies within the definition that NW had two different signal rules,

Tom, When you say 'slow flash' on the node, is that the 1/2 sec on, 1/2 off, which would be normal for a node that received the INIT. Or do you mean the flash that says it never saw the INIT? Before

Upgrading from 4.4 to 4.10 breaks the script line: ??? self.panel =

Dave, so I created 4 signal masts to test out what you said. I can get them to change correctly by clicking them on the screen. How do I get them to work as the train moves through them? And how do I

Hi Tom, Quick assessment (probably wrong but here goes. 1. You do not have the correct comm port set up so the CMRI node can talk to the system. Check whatever Lumbutu uses to check what is connected

Just for grins, I changed the file appearance-SL-2-high-absolute.xml to include an aspect called Diverging Approach which was a copy of Approach Diverging.? I also removed the aspect mapping for

With the NCE Power Pro, the NCE recommended "Clear All Advanced Consists" command (Pro Cab, under Setup Command Station) is better, much easier, safer and more thorough than trying to fix things

Our club has a C/MRI maxi-node with a SUSIC, eight DOUT24 output cards four DIN 24 input cards. It is connected to a Lubuntu 18.04 system using a two port 16550 based RS-232 serial card. While I was

JMRI version: 4.13.4 and 4.12 Java version:?1.8.0_171 MacOS: Version 10.13 I've been working on a small physical layout connected to JMRI to understand signaling and LCC.? I've been using SML with

David, In the next test release 4.13.5, I've added check boxes to the "Manifest Print Options" window that will allow you to the show caboose and passenger car loads . Dan

Wain, It looks to me that the NCE command station crashed. Other than the Macro tool, was anything else communicating with the NCE command station?? The console shows a timeout to a valid macro

Dave? I have been using JMRI for a while now, but I cannot seem to get where I want to be. I have a Digitrax system, DCS50, Windows Vista RR-Cirkits and loconet. I believe Dave has my layout (George

Your fallback method (copying the "roster" folder) is the one I prefer. The Export Complete Roster option takes a long time to complete (with no busy/completed feedback) and actually produces a ZIP

/g/jmriusers/message/153685 There are only 4 messages in the original thread. Your answer is in the second message. /g/jmriusers/message/153695 -- Peter Ulvestad JMRI

Mike, Wouter is correct. I need to update this page: <http://jmri.org/help/en/html/hardware/nce/NCE.shtml#usblimitations> Also, as Wouter has said, ignore the el-cheapo RS232 to USB connectors you see

Greetings all; My first note of this snag seemed to have been co-opted to the discussion of some other problem - so I'm re-printing it. ------------------------------------------------------ Another

I have numerous logix running on my layout and have for years.? I recently have added several signal heads and more logix to go with them.? Every once in a while, when the logix controlling a signal