Joe,
?
It appears you have been conversing with someone (Dan?) via private means versus the group post, so I think you maybe sent this post errantly.? But since you posted here, and gave me a little bit (the build report) to go on, I will chime in... ;-)
?
From the build report...
Car (CSXT 247307) departing staging (Afton), try routing car to
(Lyndhurst Transload, LYN Trans-L 2C) using two or more trains
Could not find a last hop C/I or yard track that can service
car to destination (Lyndhurst Transload)
The program cannot find a suitable track for the last hop necessary to get the car delivered.? In other words, there is no CI or yard track which can hold the car for the Wolfpen Turn to deliver it to the Transload.
If you reset train NSVL 82 and bump up the Route detail level (to Very Detailed) under Build Report Options, then rebuild the train, the explanation of the various trains and tracks used, will be listed.
As another suggestion, while you are trying to get a certain behaviour figured out, I would turn off the option under Staging Options that allows the program to "try Normal mode if build fails from Staging."? This will prevent the program from using a "work around" to get the cars to leave staging, and will force you to have to diagnose the issues (like the one your having) that may be present in your setup.
?
If I were to guess right now (without seeing a higher detail level build report), I would imagine you have track (in Lyndhurst Yard) from which the Wolfpen Turn isn't allowed to "pick up" and so it cannot move a car on to the Transload.
?
Happy to help, hope it helps,
<Pete johnson>
