Mike,
On 17 Dec 2019, at 4:49 AM, emrldsky <azMikeG@...> wrote:
The OS is Windows XP, and the usb is the NCE adapter. This all worked a couple of years ago. Maybe dust overload? :-)
If you are using the NCE USB board with your NCE Power Pro (plugged into the cab bus), you'll never be able to program locos.
You need a third-party USB-Serial cable (such as the one ESU sells as a spare for its LokProgrammer hardware, or the similar FDTI-chipset based one from RRCirKits), plugged into the 9-pin serial port on the metal Power Pro box.
No point further logs or speculation until that's resolved.
Dave in Australia
