开云体育

My shack is in a 10x16 Shed that is outside of my house. It is insulated but not heated when not in use. Anything I should be concerned about with my gear being out there? Anything specific to the

Regardless what speaker you choose, try it in different locations in the vehicle before you mount it permanently.? You will be surprised how physical location affects the sound.? Even a small

Haven't had an issue. Mine runs warm, but not excessively hot. The one in the shack has run 24x7 for most of the past few years. -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

What he said. Same for 220 (US) and 440. KC4BO wrote:

If you have the default setup, the knob behind the volume is the squelch in FM and RF gain for other modes Perry K4PWO Sent from my Galaxy S?III

I don't know where you are, but mine has a 1 year warranty from Icom, and an added 2 year warranty from the merchant. Should allow me to "burn it in" in that time! Many shops allow you a certain time

Where is the squelch level and mode set at? ismail kt6ln alex.c.lawler@...> wrote:

Just to clarify: The FET on the small board is the driver (Q504). The pre-drivers are Q101, Q102. The first adjustment in section 4-4 sets the Driver idle bias. The remaining steps adjust the PA

I was operating the IC7000 on my desk when it emitted smoke. I quickly turned off and opened up to investigate. I confirmed that the pre-driver board was blackened, which according to web searches

The RCA and GE mobile speakers are also pretty good. * * * * * * * * * * * * 73 - Mac, K2GKK/5 * * (Since 30 Nov 53) * * Oklahoma City, OK * * USAF, Ret (61-81) * * * * * * * * * * * * To:

That's what I run mobile (1 for my 7000 and 1 for my 8800). I use the unamplified one and it will handle 12W of audio, it is very loud and very clear. You can pick them up unused for $5 or so at

Hi. Thanks for the replies. For some reason I am responding to msgs but they are not showing up. Perhaps as I'm a new member the moderator is checking my msgs before they are publically posted. That

As I remember it, the IC-7000 has a default setting which makes the "RF GAIN / SQL" knob act as an RF Gain knob in CW/SSB mode, and as a _squelch_ knob in FM mode. A flickering green light --

I'm using a R/S 10-w amplified-speaker. Works rather well, but don't know if they're still available. It's mounted on the top-of-the-dash 'dish', which I cut holes into to allow the audio & DC

I like the Kenwood, KES-5. JIM, ?WD8QBQ ________________________________ To: ic7000@... Sent: Tuesday, December 3, 2013 10:16 PM Subject: [IC-7000] Mobile speaker ? Does anyone

I bought a pair of Philips from Argos for home use. Only ?39.99 and a massive improvement on the internal speaker.

As a retired Motorola Communications guy, I can very highly recommend the newer plastic housed mobile radio speakers, or the older TSN-6000 heavy metal Motrac era speakers for really solid and

Hi. Thanks for replying. I tried to delete this post after posting as my error was abit embarrassing. I had the squelch partially on.

Hi Helen yes i know i have these issues too add to that when operating long overs are not possible due to these problems. they are amateur radio sets not designed to be used due to the duty cycle

Hi why not get stuck on 2 meter repeaters use it or lose it seems to be the message from most governments if we don't use our frequencies we lose them to the commercial