开云体育

Are you using the vhf/uhf output connector?

Unusual. VHF and UFH use separate PA transistors. Check to see what the current draw on those bands is and if you see a large SWR. There might be a problem between the transistors and the antenna

My 7000 keys but no output on either 2 or uhf frequency hf and 6 meters work perfectly ?any help to diagnose would be grateful Rupert 6y5rw

I have a complete and fully functional ic7000, in pelican case along with LDG tuner and microHam USBIII computer interface for sale. ?This is truly one of the early DC to Daylight Shack in a box

Go in to windows device manager, and see com port settings

Good in to windows device manager and plug in the cable and see what com port it is using for the port, And see that there is not a yellow marker for this com port, if there is , you need a driver for

I use HRD and RTS 7000 control software often. The RTS USB to CIV interface is easy and works well. USB ops in Windows can be problematic, make sure to disable power saving for all USB devices in

Give RT Systems a call as there have been changes to the way windows acts with some com port drivers. I called on an issue wit getting the system to work with my FTM-400 and they were a big help,

Hello group. A drunk drove into my house and caused a bunch of structural damage, so we had to find a place to stay while the place is being repaired. I got my IC-7000 new right after they came out

I absolutely LOVE my IC-7000 - it, along with my AH-4 tuner have served me well for over 12 years and are going strong. That said, it is both power hungry AND power sensitive. It draws a lot of

I just purchased the Digirig and cables direct from Digirig. My IC7000 now connects to my logging software and logs all radio info automatically and I am successfully using FT8. Digirig has good

Hello, have also a look out our ct17b civ hub on WWW.VE2DX.COM -- 73 Richard VE2DX, Jesus Island, PQ-014 VE2DX ELECTRONIC WWW.VE2DX.COM ( https://WWW.VE2DX.COM ) Only the Best ICOM, ERC and

Edward: you need a USB to CIV adapter. Mine is no longer available, but it looks like the following is an example of whatt should

Hi J.D., I am also new to interfacing with my IC-7k for digital modes. Would a Digirig also be a good alternative?

Checkout Digirig Mobile. They have USB converter and needed cables. Good support as well.

J.D. I'll give it a shot. Thanks very much. Ed [email protected]> wrote:

You need a USB to serial cable for CAT control to access the C-IV Icom control of the radio. You can buy one made for it on Amazon or buy a cheap Beofeng (sp?) programming unit and cut the twin

I'm just trying to start digital comm and need help. ?What hardware is needed between my IC7000 and a Lenovo PC? Thanks

Two things: Do one of the fan mods, the radio runs hot. Make sure the arrangement of the go box allows enough air circulation. -- Allison

Hey there Jim, Any chance you'll be interested in selling me that separation cable? Ive been looking for one for a bit. Thanks in advance Tony km6etx 6504443271 toekneepony@...