Re: [IC-7000] ice comm software
Thanks, Peter. I didn't realize I picked up an extra character.
toggle quoted message
Show quoted text
--- In ic7000@..., "Peter Horgan" <pho62721@...> wrote:
Andy
This is working as I have downloaded the file. You need to remove the "A" after download
in the address : .
Peter
VK5BWH
----- Original Message -----
From: m0gav1@...
To: ic7000@...
Sent: Monday, January 06, 2014 9:00 AM
Subject: Re: [IC-7000] ice comm software
No its definitely icom 7000 freeware programming software..of course if anyone has an alternative which id free i would be interested.
Andy
--- In ic7000@..., "i2jjr-hotmail.com" <i2jjr@> wrote:
>
> HI Andy and all younder,
> I was using - if I remember correctly - that software, it was ICE PAC
> (and ITS HF propagation) by gregory.hand@ at NTIA/ITS, and
> was available at www.greg-hand.com/hf.html ) for propagation forecasts
> with my SCS-PtcII and the AirMail , Software and Hardware.
> I should have this soft in an old laptop I used with that station
> set-up, I will be there in a few days. Let me know if it is what you
> were searching for, please. The web site is still active, and you may
> look there.
> Hope this may help, 73 de Augusto i2jjr hb9tza
>
> Il 05/01/2014 22.36, m0gav1@ ha scritto:
> > Keith i followed the link and it came to a dead end! some hosting site and no sign of the ice comm software...I really need someone who has a copy to email it to me..
> > Andy.
> > --- In ic7000@..., "Keith D. Brady" <kdbrady1963@> wrote:
> >>
> >>
> >>
> >> I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
> >>
> >> Here is the link that I found it at... It appears to be what you are looking for.
> >>
> >> Good luck - 73 - Keith - KB0CAP
> >>
> >>
> >>> ________________________________
> >>> From: "m0gav1@" <m0gav1@>
> >>> To: ic7000@...
> >>> Sent: Sunday, January 5, 2014 1:06 PM
> >>> Subject: [IC-7000] ice comm software
> >>>
> >>>
> >>> ?
> >>>
> >>> Anyone got a copy of above software please? Tried various links and url's all dead ends!!
> >>> Thanks in advance..
> >>> Andy...
> >>>
> >>>
> >>>
> >
> >
> >
> > ------------------------------------
> >
> > Community email addresses:
> > Post message: IC7000@...
> > Subscribe: IC7000-subscribe@...
> > Unsubscribe: IC7000-unsubscribe@...
> > List owner: IC7000-owner@...
> >
> > **
> > "Spam, racism, name-calling, vulgarity, religious or political propaganda, personal insults and/or verbal abuse will not be tolerated in this group at any time. Any member posting such material will be placed on moderated status, and is subject to deletion and banning."
> > **
> > Yahoo Groups Links
> >
> >
> >
> >
> >
>
|
Re: [IC-7000] ice comm software
Andy,
I just uploaded a Word Document with the Information that I have come up with, including Screen Shots. It's in the Files Section.
Keith
toggle quoted message
Show quoted text
--- In ic7000@..., "m0gav1@..." <m0gav1@...> wrote:
No its definitely icom 7000 freeware programming software..of course if anyone has an alternative which id free i would be interested.
Andy
--- In ic7000@..., "i2jjr-hotmail.com" <i2jjr@> wrote:
HI Andy and all younder,
I was using - if I remember correctly - that software, it was ICE PAC
(and ITS HF propagation) by gregory.hand@ at NTIA/ITS, and
was available at www.greg-hand.com/hf.html ) for propagation forecasts
with my SCS-PtcII and the AirMail , Software and Hardware.
I should have this soft in an old laptop I used with that station
set-up, I will be there in a few days. Let me know if it is what you
were searching for, please. The web site is still active, and you may
look there.
Hope this may help, 73 de Augusto i2jjr hb9tza
Il 05/01/2014 22.36, m0gav1@ ha scritto:
Keith i followed the link and it came to a dead end! some hosting site and no sign of the ice comm software...I really need someone who has a copy to email it to me..
Andy.
--- In ic7000@..., "Keith D. Brady" <kdbrady1963@> wrote:
I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
Here is the link that I found it at... It appears to be what you are looking for.
Good luck - 73 - Keith - KB0CAP
________________________________
From: "m0gav1@" <m0gav1@>
To: ic7000@...
Sent: Sunday, January 5, 2014 1:06 PM
Subject: [IC-7000] ice comm software
?
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
------------------------------------
Community email addresses:
Post message: IC7000@...
Subscribe: IC7000-subscribe@...
Unsubscribe: IC7000-unsubscribe@...
List owner: IC7000-owner@...
**
"Spam, racism, name-calling, vulgarity, religious or political propaganda, personal insults and/or verbal abuse will not be tolerated in this group at any time. Any member posting such material will be placed on moderated status, and is subject to deletion and banning."
**
Yahoo Groups Links
|
Re: [IC-7000] ice comm software
Andy
?
This is working as I have downloaded the
file. You need to remove the "A" after download
in the address :??
https://sites.google.com/site/sixspotsoftware/downloads? .
?
Peter
VK5BWH
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Monday, January 06, 2014 9:00
AM
Subject: Re: [IC-7000] ice comm
software
?
No its definitely icom 7000 freeware programming software..of course if
anyone has an alternative which id free i would be
interested.
Andy
--- In ic7000@...,
"i2jjr-hotmail.com" wrote:
>
> HI Andy and all
younder,
> I was using - if I remember correctly - that software, it was
ICE PAC
> (and ITS HF propagation) by gregory.hand@... at NTIA/ITS, and
> was available at www.greg-hand.com/hf.html ) for propagation
forecasts
> with my SCS-PtcII and the AirMail , Software and
Hardware.
> I should have this soft in an old laptop I used with that
station
> set-up, I will be there in a few days. Let me know if it is
what you
> were searching for, please. The web site is still active,
and you may
> look there.
> Hope this may help, 73 de Augusto
i2jjr hb9tza
>
> Il 05/01/2014 22.36, m0gav1@... ha
scritto:
> > Keith i followed the link and it came to a dead end!
some hosting site and no sign of the ice comm software...I really need someone
who has a copy to email it to me..
> > Andy.
> > --- In
ic7000@..., "Keith D. Brady" wrote:
>
>>
> >>
> >>
> >> I'm not currently
set up to try this, but I downloaded it. I get an error when I start it. So,
I'm not sure if it is because I don't have my radio connected or if it's the
software.
> >>
> >> Here is the link that I found it
at... https://sites.google.com/site/sixspotsoftware/downloads? It appears to
be what you are looking for.
> >>
> >> Good luck - 73
- Keith - KB0CAP
> >>
> >>
> >>>
________________________________
> >>> From: "m0gav1@"
> >>> To: ic7000@...
>
>>> Sent: Sunday, January 5, 2014 1:06 PM
> >>>
Subject: [IC-7000] ice comm software
> >>>
>
>>>
> >>> ?
> >>>
> >>>
Anyone got a copy of above software please? Tried various links and url's all
dead ends!!
> >>> Thanks in advance..
> >>>
Andy...
> >>>
> >>>
> >>>
>
>
> >
> >
> >
------------------------------------
> >
> > Community email
addresses:
> > Post message: IC7000@...
> >
Subscribe: IC7000-subscribe@...
> > Unsubscribe:
IC7000-unsubscribe@...
> > List owner:
IC7000-owner@...
> >
> >
**
>
> "Spam, racism, name-calling, vulgarity, religious or political
propaganda, personal insults and/or verbal abuse will not be tolerated in this
group at any time. Any member posting such material will be placed on
moderated status, and is subject to deletion and banning."
> >
**
>
> Yahoo Groups Links
> >
> >
> >
>
>
> >
>
|
Re: [IC-7000] ice comm software
No its definitely icom 7000 freeware programming software..of course if anyone has an alternative which id free i would be interested.
Andy
toggle quoted message
Show quoted text
--- In ic7000@..., "i2jjr-hotmail.com" <i2jjr@...> wrote:
HI Andy and all younder,
I was using - if I remember correctly - that software, it was ICE PAC
(and ITS HF propagation) by gregory.hand@... at NTIA/ITS, and
was available at www.greg-hand.com/hf.html ) for propagation forecasts
with my SCS-PtcII and the AirMail , Software and Hardware.
I should have this soft in an old laptop I used with that station
set-up, I will be there in a few days. Let me know if it is what you
were searching for, please. The web site is still active, and you may
look there.
Hope this may help, 73 de Augusto i2jjr hb9tza
Il 05/01/2014 22.36, m0gav1@... ha scritto:
Keith i followed the link and it came to a dead end! some hosting site and no sign of the ice comm software...I really need someone who has a copy to email it to me..
Andy.
--- In ic7000@..., "Keith D. Brady" <kdbrady1963@> wrote:
I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
Here is the link that I found it at... It appears to be what you are looking for.
Good luck - 73 - Keith - KB0CAP
________________________________
From: "m0gav1@" <m0gav1@>
To: ic7000@...
Sent: Sunday, January 5, 2014 1:06 PM
Subject: [IC-7000] ice comm software
?
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
------------------------------------
Community email addresses:
Post message: IC7000@...
Subscribe: IC7000-subscribe@...
Unsubscribe: IC7000-unsubscribe@...
List owner: IC7000-owner@...
**
"Spam, racism, name-calling, vulgarity, religious or political propaganda, personal insults and/or verbal abuse will not be tolerated in this group at any time. Any member posting such material will be placed on moderated status, and is subject to deletion and banning."
**
Yahoo Groups Links
|
Re: [IC-7000] ice comm software
HI Andy and all younder,
I was using - if I remember correctly - that software, it was ICE PAC (and ITS HF propagation) by gregory.hand@... at NTIA/ITS, and was available at www.greg-hand.com/hf.html ) for propagation forecasts with my SCS-PtcII and the AirMail , Software and Hardware.
I should have this soft in an old laptop I used with that station set-up, I will be there in a few days. Let me know if it is what you were searching for, please. The web site is still active, and you may look there.
Hope this may help, 73 de Augusto i2jjr hb9tza
toggle quoted message
Show quoted text
Il 05/01/2014 22.36, m0gav1@... ha scritto: Keith i followed the link and it came to a dead end! some hosting site and no sign of the ice comm software...I really need someone who has a copy to email it to me..
Andy.
--- In ic7000@..., "Keith D. Brady" <kdbrady1963@...> wrote:
I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
Here is the link that I found it at... It appears to be what you are looking for.
Good luck - 73 - Keith - KB0CAP
________________________________
From: "m0gav1@..." <m0gav1@...>
To: ic7000@...
Sent: Sunday, January 5, 2014 1:06 PM
Subject: [IC-7000] ice comm software
???
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
------------------------------------
Community email addresses:
Post message: IC7000@...
Subscribe: IC7000-subscribe@...
Unsubscribe: IC7000-unsubscribe@...
List owner: IC7000-owner@...
**
"Spam, racism, name-calling, vulgarity, religious or political propaganda, personal insults and/or verbal abuse will not be tolerated in this group at any time. Any member posting such material will be placed on moderated status, and is subject to deletion and banning."
**
Yahoo Groups Links
|
Re: [IC-7000] ice comm software
I'm sorry. I'm not sure what happened. I did download and installed, what appeared to be the software. Perhaps, what I downloaded was a corrupt file, thus my error message.
...Please forgive me for any possible typos. :-)
toggle quoted message
Show quoted text
On Jan 5, 2014, at 15:36, " m0gav1@..." < m0gav1@...> wrote:
?
Keith i followed the link and it came to a dead end! some hosting site and no sign of the ice comm software...I really need someone who has a copy to email it to me..
Andy.
--- In ic7000@..., "Keith D. Brady" wrote:
>
>
>
>
> I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
>
> Here is the link that I found it at... ? It appears to be what you are looking for.
>
> Good luck - 73 - Keith - KB0CAP
>
>
> >________________________________
> > From: "m0gav1@..."
> >To: ic7000@...
> >Sent: Sunday, January 5, 2014 1:06 PM
> >Subject: [IC-7000] ice comm software
> >
> >
> >?
> >
> >Anyone got a copy of above software please? Tried various links and url's all dead ends!!
> >Thanks in advance..
> >Andy...
> >
> >
> >
>
|
Re: [IC-7000] ice comm software
Keith i followed the link and it came to a dead end! some hosting site and no sign of the ice comm software...I really need someone who has a copy to email it to me..
Andy.
toggle quoted message
Show quoted text
--- In ic7000@..., "Keith D. Brady" <kdbrady1963@...> wrote:
I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
Here is the link that I found it at... It appears to be what you are looking for.
Good luck - 73 - Keith - KB0CAP
________________________________
From: "m0gav1@..." <m0gav1@...>
To: ic7000@...
Sent: Sunday, January 5, 2014 1:06 PM
Subject: [IC-7000] ice comm software
??
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
|
Re: [IC-7000] RE: Spare parts
And then the story gets changed and we end up with "Bob Heil" says
not to ground your station.? I really think all the companies
should be required to include a copy of the Polyphaser grounding
paper with each and every radio that is sold.
So, it should be mandated that manufacturers give out something?? If
the users don't have any common sense, forcing manufacturers to give
them something to read isn't going to help.? At some point WE all
have to take some responsibility.? If you have ever elmered someone,
did you talk about lightning safety?? Or only how to use the local 2
meter repeater??
Everyone should know that lightning can damage our equipment, and
even cause injury.? Not doing anything to mitigate it increases that
risk.? It is up to us to learn how to mitigate the risk, just as it
is to hook up our antennas and power supplies correctly.
Mark
|
And then the story gets changed and we end up with "Bob Heil" says not to ground your station.? I really think all the companies should be required to include a copy of the Polyphaser grounding paper with each and every radio that is sold.
|
Re: [IC-7000] ice comm software
what i find it is internet chat software
? nothing to do with ham radio
From: john hinds
To: ic7000@...
Sent: Sunday, January 5, 2014 2:18 PM
Subject: Re: [IC-7000] ice comm software
?
sorry never heard of it what does it do
From: "m0gav1@..."
To: ic7000@...
Sent: Sunday, 5 January 2014, 19:06
Subject:
[IC-7000] ice comm software
?
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
|
Re: [IC-7000] ice comm software
?
I'm not currently set up to try this, but I downloaded it. I get an error when I start it. So, I'm not sure if it is because I don't have my radio connected or if it's the software.
Here is the link that I found it at... ? It appears to be what you are looking for.
Good luck - 73 - Keith - KB0CAP
From: "m0gav1@..."
To: ic7000@...
Sent: Sunday, January 5, 2014 1:06 PM
Subject: [IC-7000] ice comm software
?
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
|
Re: [IC-7000] ice comm software
sorry never heard of it what does it do
From: "m0gav1@..."
To: ic7000@...
Sent: Sunday, 5 January 2014, 19:06
Subject:
[IC-7000] ice comm software
?
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
|
Anyone got a copy of above software please? Tried various links and url's all dead ends!!
Thanks in advance..
Andy...
|
I've seen several forums conducted by Heil and he advocates not grounding for RF purposes, not lightning. They are two separate discussions.? Lightning grounding is imperative...where grounding your equipment with the desired effects of solving various problems related to unwanted RF situations is what he is referring to when he advocates not grounding.?
Kirk, W5KRK
|
Just wondering if there are any other ic7000 users in Belize?? I just relocated to Placencia (permanently I hope) and am just getting set up as V31TK (KF5WBG).
|
Re: RES: RES: [IC-7000] Spare parts
" I read somewhere that Bob Heil has an extensive and totally ungrounded station, and never has a problem with lightning or RF."
And he will be SK Bob Heil if lightning strikes that Antenna while he's using the Radio.? Not to mention how many other people in his house may get hurt as it runs from the rig down the mains ground to his appliances.
Nothing is a certainty unless you spend really big $$ on a professionally installed grounding system but for a few hundred dollars you can swing the odds in your favor.
|
Re: [IC-7000] Watch the MDSR TAPR presentation on how to upgrade RIGs to SDR
HAM? Is that the acronym for Hailing Amateur Mariners?
toggle quoted message
Show quoted text
?
I'm at sea and my video links are not available due to bandwidth issues. What would I do with my HAM now that is a SDR radio?
|
Re: RES: RES: [IC-7000] Spare parts
Any lightning discharge that can travel over a mile through the air, won't have any problem going an extra 6 feet through your house or through a glass jar! ?
Having an ungrounded radio system doesn't necessarily mean having no lightning protection. ?I'm sure that Bob Heil's receivers are just as sensitive to a 200+ kilovolt, 20,000 amp discharge nearby as anyone else's. ?I notice that the "Heil Ham Radio Handbook" has a whole chapter on "Proper Grounding & RFI". ?I haven't read it, but it doesn't say "ungrounding".... ??
Would you rather entrust the safety of your family to folklore or proven best practices?
Steve, W3AHL? ---In ic7000@..., <anetherton@...> wrote: One Ham said he places all his antenna leads in a glass jar after disconnecting from the radio. I hang them about 6 feet away from any equipment. An ungrounded system sometimes seems a good way to go; I read somewhere that Bob Heil has an extensive and totally ungrounded station, and never has a problem with lightning or RF.
Curious... 73 de KC4BO
|
Re: RES: RES: [IC-7000] Spare parts
One Ham said he places all his antenna leads in a glass jar after disconnecting from the radio. I hang them about 6 feet away from any equipment. An ungrounded system sometimes seems a good way to go; I read somewhere that Bob Heil has an extensive and totally ungrounded station, and never has a problem with lightning or RF.
Curious... 73 de KC4BO
On Fri, Jan 3, 2014 at 8:29 PM, <iz0abd@...> wrote:
?
Hi all,
a coaxial line EM discharger is not enough when a lightning arrive on your antenna. I had a 8 meters long vertical antenna on the top of the roof. It simply exploded, I found several parts of a coil meters and meters far away from the home.
I always disconnect all antennas from my radios. But that time it arrived on my antennas and damaged:
- the vertical antenna
- one power supply
- IC 7k and antenna tuner
- Kenwood TM702
- one computer
- adsl router
- voip gateway
- tv antenna amplifier
- water heater control board
- satellite tv feeder
- some parts of the roof.
So I bet that nothing can protect a radio in this condition. The electrical discharge found a privileged path throut the grounding wire of the power supply. I noted, in fact, the most of the damages are on components close to metal parts connected to ground.
In the IC 7k, some components on the RF board vaporized and on the lower metal panel there a huge sign of this explosion - I couls say the evidence of the electrical discharge.
So probably all of you are right, and I simply have to think if to look for spare parts or not.
Thank you again.
Best 73s de IZ0ABD Francesco
|
Re: Watch the MDSR TAPR presentation on how to upgrade RIGs to SDR
I'm at sea and my video links are not available due to bandwidth issues. What would I do with my HAM now that is a SDR radio?
Rene Steinhauer
KJ6BYK
toggle quoted message
Show quoted text
--- In ic7000@..., <alexschwarz237@...> wrote:
Hi Everybody;
Gary Pearce (KN4AQ) is presenting the MDSR project in his 116th. episode of HAM Radio Now.
You can watch his take on the show and introduction followed by the talk given by Alex Schwarz (VE7DXW) about the MDSR project.
Your transceiver, a computer and a LIF2012 kit is all you need to experience the MDSR software and turn your rig into a SDR radio.
Here is the link:
All the best and Happy New Year;
Alex
VE7DXW
|
Augusto
Steve W3AHL