Filter width too narrow or automatic notch filter turned on?
?? ? ? ? This message was delivered by flying monkeys!
toggle quoted message
Show quoted text
On Nov 18, 2013, at 18:57, "John V. Nelson (KD8TZC)" < kd8tzc@...> wrote:
?
When I turn my 7k to the CW mode, for some reason all the background noise sounds really muffled.? If I then switch it to LSB or USB, I can hear the CW tones that are being sent by other stations.? Why do I have set wrong on my unit and how do I fix it so I can use this correctly. ? Thanks, ? John – KD8TZC
|
Sounds like you have filters on. Check you don't have nr noise blank filters on etc and check the filter width. When selecting cw the tones should dull down slightly but not as much as your saying
Billy
GM0OBX
|
From:
John V. Nelson (KD8TZC) ;
To:
;
Subject:
[IC-7000] CW Mode
Sent:
Tue, Nov 19, 2013 12:57:07 AM
?
When I turn my 7k to the CW mode, for some reason all the background noise sounds really muffled.? If I then switch it to LSB or USB, I can hear the CW tones that are being sent by other stations.? Why do I have set wrong on my unit and how do I fix it so I can use this correctly. ? Thanks, ? John – KD8TZC
|
|
When I turn my 7k to the CW mode, for some reason all the background noise sounds really muffled.? If I then switch it to LSB or USB, I can hear the CW tones that are being sent by other stations.? Why do I have set wrong on my unit and how do I fix it so I can use this correctly. ? Thanks, ? John – KD8TZC
|
Re: [IC-7000] Is IC 7000 a good pactor radio ?
Hi Robert G6LLP ,
Maybe some of the problems come from the fact that KAM , and many
similar TNC made for Packet, are not really complaining with the
Pactor lev.1 protocol !!
I never had such troublem with SCS PtcII 1st version ( I have it
from 1993) and followers, but had many many with a KAM+ that was not
able to stay synchro with the SCS , because of the intrinsic
weakness that their protocol implementation discount gave them.
Apart from them, the implementation of soft with sound carts for the
Pactor protocols suffer from the timing issues of Windows. A well
known issue among soundcard soft developers.
If you like more doc on pactor prootocols, look for them in the SCS
Gmbh PTCII pages, and have a glance at the Dragon , the Level4
monster.
73 de Augusto I2JJR HB9TZA
?
Il 18/11/2013 7.34, BT Yahoo!?2013 ha
scritto:
toggle quoted message
Show quoted text
Hi Most of
these modes where used using a KAM which was a TNC with two
ports the move to using sound cards and software is only as good
as the software which is written.
?so many seem to be having issues it does make me think it must
be the software which really is the issue.
the simple TNC programs gave little problems unlike the mess i
see these days.
???????????????????????????????????????????????????????????????????????
Best Regards Robert G6LLP
From:
"w4ayk@..."
To:
ic7000@...
Sent:
Sunday, 17 November 2013, 23:57
Subject:
Re: [IC-7000] Is IC 7000 a good pactor radio ?
?
I use the SCS Modem with Pactor II and III and
no problem with the 7000 or the 706 MK IIG
Gene
Eugene C. Clark W4AYK
Section Manager, Georgia
ARRL, the national organization for Amateur Radio
email: w4ayk@...,
Telephone Home(229) 888-1090 Cell(229)344-1895
----- Original Message -----
From: kg5ks@...
To: ic7000@...
Sent: Sun, 17 Nov 2013 16:37:11 -0600 (CST)
Subject: [IC-7000] Is IC 7000 a good pactor radio
?
Would like to hear how well the IC 7000 does
digital modes such as pactor ?
Thank you
73
Kenny
|
Re: [IC-7000] IC7000 and RTTY what do you do?
I was wondering what software you use and interface. I can't get the 7000 to tx digi modes in rtty.
Billy
GM0OBX
|
From:
Tony Langdon ;
To:
;
Subject:
Re: [IC-7000] IC7000 and RTTY what do you do?
Sent:
Mon, Nov 18, 2013 2:00:36 AM
All,
I'm having trouble using the ic7000 in RTTY mode or not.
I use mix w with the rigexpert standard interface.
The trouble is this: When using the 7000 with mix w in USB mode it
will not transmit any power and when using the 7000 in RTTY mode
it will transmit but the ALC is VERY high. I have tried adjusting
the volume levels on the pc which has no effect with alc or power
when in usb or rtty mode.
I was wondering what do others do for transmitting RTTY with the
IC7000?
I just use audio tones in SSB mode for all my digital modes, rather
than getting the radio to do FSK.? Easier for me, since I use a wide
variety of digital modes.
--
73 de Tony VK3JED/VK3IRL
|
Re: IC7000 and RTTY what do you do?
Tony,
I was wondering what software you use and interface. I can't get the 7000 to tx when in USB modes for digi stuff
|
Re: [IC-7000] Is IC 7000 a good pactor radio ?
Hi Most of these modes where used using a KAM which was a TNC with two ports the move to using sound cards and software is only as good as the software which is written. ?so many seem to be having issues it does make me think it must be the software which really is the issue. the simple TNC programs gave little problems unlike the mess i see these days. ??????????????????????????????????????????????????????????????????????? Best Regards Robert
G6LLP
From: "w4ayk@..."
To: ic7000@...
Sent: Sunday, 17 November 2013, 23:57
Subject: Re: [IC-7000] Is IC 7000 a good pactor radio ?
?
I use the SCS Modem with Pactor II and III and no problem with the 7000 or the 706 MK IIG
Gene
Eugene C. Clark W4AYK
Section Manager, Georgia
ARRL, the national organization for Amateur Radio
email: w4ayk@...,
Telephone Home(229) 888-1090 Cell(229)344-1895
----- Original Message -----
From: kg5ks@...
To: ic7000@...
Sent: Sun, 17 Nov 2013 16:37:11 -0600 (CST)
Subject: [IC-7000] Is IC 7000 a good pactor radio ?
Would like to hear how well the IC 7000 does digital modes such as pactor ?
Thank you
73
Kenny
|
Re: [IC-7000] IC7000 and RTTY what do you do?
All,
I'm having trouble using the ic7000 in RTTY mode or not.
I use mix w with the rigexpert standard interface.
The trouble is this: When using the 7000 with mix w in USB mode it
will not transmit any power and when using the 7000 in RTTY mode
it will transmit but the ALC is VERY high. I have tried adjusting
the volume levels on the pc which has no effect with alc or power
when in usb or rtty mode.
I was wondering what do others do for transmitting RTTY with the
IC7000?
I just use audio tones in SSB mode for all my digital modes, rather
than getting the radio to do FSK.? Easier for me, since I use a wide
variety of digital modes.
--
73 de Tony VK3JED/VK3IRL
|
Re: [IC-7000] 7000 & DVRPTR?
Curious if anyone has used a DVRPTR with a 7000. Any tips,
tricks, comments, complaints, etc.?
Yep, no issues.? Signal polarity is "normal" for Tx and Rx.? Use the
data port, make sure the radio is configured for 9600 bps and in FM
mode.? I used the second (10 kHz) IF filter.? Haven't had a chance
to confirm if this is the best filter for D-STAR, but it seems to
work.? Note that if switching between filter 1 (16 kHz) and the
others, you need to change the amount of drive from the DV-RPTR
board, because the radio configures itself for a different deviation
(wider) for filter 1.
--
73 de Tony VK3JED/VK3IRL
|
Re: [IC-7000] Is IC 7000 a good pactor radio ?
I use the SCS Modem with Pactor II and III and no problem with the 7000 or the 706 MK IIG
Gene
Eugene C. Clark W4AYK
Section Manager, Georgia
ARRL, the national organization for Amateur Radio
email: w4ayk@...,
Telephone Home(229) 888-1090 Cell(229)344-1895
toggle quoted message
Show quoted text
----- Original Message -----
From: kg5ks@...
To: ic7000@...
Sent: Sun, 17 Nov 2013 16:37:11 -0600 (CST)
Subject: [IC-7000] Is IC 7000 a good pactor radio ?
Would like to hear how well the IC 7000 does digital modes such as pactor ?
Thank you
73
Kenny
|
IC7000 and RTTY what do you do?
All,
I'm having trouble using the ic7000 in RTTY mode or not.
I use mix w with the rigexpert standard interface.
The trouble is this: When using the 7000 with mix w in USB mode it will not transmit any power and when using the 7000 in RTTY mode it will transmit but the ALC is VERY high. I have tried adjusting the volume levels on the pc which has no effect with alc or power when in usb or rtty mode.
I was wondering what do others do for transmitting RTTY with the IC7000?
here is a short video of what is going on:
http://www.youtube.com/watch?v=ijVyb-aBjzo&feature=youtu.be
any suggestions would be helpful
Billy
GM0OBX
|
Is IC 7000 a good pactor radio ?
Would like to hear how well the IC 7000 does digital modes such as pactor ?
Thank you
73
Kenny
|
Curious if anyone has used a DVRPTR with a 7000. Any tips, tricks, comments, complaints, etc.?
Thanks, Dave S. W2PAX Naples, FL csxtbonevalley@...
|
Displayed Frequency does not change
Hi- I have seen this before but having trouble now- The VFO won't change frequency and I can't use the VFO to adjust menu params. When I turn the VFO I only get the KHz to move up and down by one. The frequency changes when controlling from my RS-BA1 program. Tried a reset but nothing. Thanks!
|
Re: ICOM 7000, Navigator Interface, WINMOR
?To all,
Well, I do feel a bit embarrassed.? Seems I overlooked the RTS checkbox on the RMS Express document from the files area of the Navigator Yahoo group.
Check the box and it worked just fine, successfully sent and received a message!
My apology for taking anyone's time due to my oversight!
---In ic7000@..., <wally_m52@...> wrote: Is anyone doing this successfully?? I have been trying to set it up with no luck, but posts in the Navigator group indicate the Navigator does work with WINMOR.? I suspect my issue is with the way I setup WINMOR to talk to the 7000.? I do have the COM ports and baud rate correct in WINMOR.? The same configuration works perfectly with HRD and DM-780.? Any ideas? or is someone using this configuration?
|
Re: ICOM 7000, Navigator Interface, WINMOR
What's the problem.. CAT Control or Soundcard issues ?
? ---In ic7000@..., <wally_m52@...> wrote: Is anyone doing this successfully?? I have been trying to set it up with no luck, but posts in the Navigator group indicate the Navigator does work with WINMOR.? I suspect my issue is with the way I setup WINMOR to talk to the 7000.? I do have the COM ports and baud rate correct in WINMOR.? The same configuration works perfectly with HRD and DM-780.? Any ideas? or is someone using this configuration?
|
Re: ICOM 7000, Navigator Interface, WINMOR
?Du you have CAT- or soundcard problem ? Im not familiar with your interface ( have a microkeyer) but it should work with the same setting... Confirm you have set the right radio is in the winmor setting (70 for IC-7000) And for the soundcard the right soundcard port....
---In ic7000@..., <wally_m52@...> wrote: Is anyone doing this successfully?? I have been trying to set it up with no luck, but posts in the Navigator group indicate the Navigator does work with WINMOR.? I suspect my issue is with the way I setup WINMOR to talk to the 7000.? I do have the COM ports and baud rate correct in WINMOR.? The same configuration works perfectly with HRD and DM-780.? Any ideas? or is someone using this configuration?
|
Re: ICOM 7000, Navigator Interface, WINMOR
?I dont know what kind of problem you have... Is it a CAT interface ?or on the soundcard side (can you receive/transmitt) problem My setup worked from day one... ---In ic7000@..., <wally_m52@...> wrote: Is anyone doing this successfully?? I have been trying to set it up with no luck, but posts in the Navigator group indicate the Navigator does work with WINMOR.? I suspect my issue is with the way I setup WINMOR to talk to the 7000.? I do have the COM ports and baud rate correct in WINMOR.? The same configuration works perfectly with HRD and DM-780.? Any ideas? or is someone using this configuration?
|
ICOM 7000, Navigator Interface, WINMOR
Is anyone doing this successfully?? I have been trying to set it up with no luck, but posts in the Navigator group indicate the Navigator does work with WINMOR.? I suspect my issue is with the way I setup WINMOR to talk to the 7000.? I do have the COM ports and baud rate correct in WINMOR.? The same configuration works perfectly with HRD and DM-780.? Any ideas? or is someone using this configuration?
|
Re: [IC-7000] RE: Stream ads in the Yahoo user group's conversation area!
HI Everybody;
I have found a way
to block the annoying ads on the Yahoo site
altogether, but it only works if you use Firefox. I recommend
that everybody
upgrades to Firefox anyways. There is an add on called Adblock
Plus that can be
installed onto Firefox and all the ads will not be downloaded
to your computer.
This is great, because all the adverts take up bandwidth.
I just use a more old school solution - IMAP (POP works as well). :)
--
73 de Tony VK3JED/VK3IRL
|
Augusto