开云体育

Wow, thanks. Looks like more than and better than Ham Radio Deluxe. Might try the demo. Alex Netherton http://blueridgediscovery.org n5as@...> wrote:

Thank you very much Keith for the insight. I have finally got my new rig programmed Yeaaaaaa!, So everything worked out well. Now the task of getting used to all the functions of the ic-7000..

Rick, You may be talking too far away from the mike. According to an excellent article by Steve Katz, you need to close talk the mike (He suggests being practically making contact with your lips).

Thanks but the ALC reading is nearly nothing and I have played with the rf gain and power.

Rick, The radio is simply defaulting to the correct output for the band. It should default to 35W on 70cm. bb KC1AKV

Rick: Depending on what you want it to do, Chirp might be an option. http://chirp.danplanet.com/projects/chirp/wiki/Home Chuck - N8DNX

The band is 70cm fm and looking at the meter the ALC is only moving about 4 notch points above zero I have read the manual changed both power and mic gain to different settings still nothing in am

Ever tried or heard of TRX-Manager? Tom, N5AS http://www.trx-manager.com/

I believe the power bar is showing approximate wattage, not a percentage. Sent from my Verizon Wireless 4G LTE DROID rickmandziak@... wrote:

Fuses have been cleaned and power supply voltage is good power in is fine.

Rick? In case you don't have the manual with your radio http://www.icomamerica.com/en/downloads/default.aspx?Category=34 bb KC1AKV

Rick, No problem! Power output on 430mhz (70 cm) is 2-35 W? The below from page 38 in the manual. For SSB/RTTY/CW/FM ? ? ? ? ? ? AM (carrier power) ? ? ? ? ? ? ? ? ? ? ? ? ? ?

?Rick, What band are you on? If you are on 2m, then that would be correct. As I saw in one video, the power meter is set as a 100 W meter. So, 50% would be 50 Watts. If you are on 2m, which?is

I've used RT Systems software and cables for many years without a single issue. When I did have a question, their support folks were more than accommodating with a professional attitude and the right

? Mine all use the same cable, IC-v8000, IC-7000 etc. yes for portables i have different cables, tho mostly one time programming as needed. not operations of digital modes. ???? when i was in

Help on 70cm I have my power output set to 100% but the power bar only reads 50% and have done a factory reset do I have a problem? I only bought this radio the other day second hand or is t

I did not say the price of their software was unreasonable, but a bit expensive, since you have to buy the cable too. I have learned that in the software game, there is no reasoning for price. Also,

How can it use a universal cable when the radios use different connections to program them? Speaker Jack on the 8000 and 7000 the VX-8DR uses the external mic/gps connecter etc.. Inside the RT usb

? This is why they? have lost so many sales. restricting software to special this? special that, etc. only drives customers away. myself, if it doesn't use a universal cable, i won't buy it. it is

To All, I know the producers of the RT systems software. The pricing on their software is very reasonable, as well as their cables. I realize international sales of their cables may be somewhat