开云体育

Fuses have been cleaned and power supply voltage is good power in is fine.

Rick? In case you don't have the manual with your radio http://www.icomamerica.com/en/downloads/default.aspx?Category=34 bb KC1AKV

Rick, No problem! Power output on 430mhz (70 cm) is 2-35 W? The below from page 38 in the manual. For SSB/RTTY/CW/FM ? ? ? ? ? ? AM (carrier power) ? ? ? ? ? ? ? ? ? ? ? ? ? ?

?Rick, What band are you on? If you are on 2m, then that would be correct. As I saw in one video, the power meter is set as a 100 W meter. So, 50% would be 50 Watts. If you are on 2m, which?is

I've used RT Systems software and cables for many years without a single issue. When I did have a question, their support folks were more than accommodating with a professional attitude and the right

? Mine all use the same cable, IC-v8000, IC-7000 etc. yes for portables i have different cables, tho mostly one time programming as needed. not operations of digital modes. ???? when i was in

Help on 70cm I have my power output set to 100% but the power bar only reads 50% and have done a factory reset do I have a problem? I only bought this radio the other day second hand or is t

I did not say the price of their software was unreasonable, but a bit expensive, since you have to buy the cable too. I have learned that in the software game, there is no reasoning for price. Also,

How can it use a universal cable when the radios use different connections to program them? Speaker Jack on the 8000 and 7000 the VX-8DR uses the external mic/gps connecter etc.. Inside the RT usb

? This is why they? have lost so many sales. restricting software to special this? special that, etc. only drives customers away. myself, if it doesn't use a universal cable, i won't buy it. it is

To All, I know the producers of the RT systems software. The pricing on their software is very reasonable, as well as their cables. I realize international sales of their cables may be somewhat

I really didn't quite understand why they tied the cable to the software like that.Still makes it a little difficult when their cable, a Prolific, decides not to work with Windows or vice versa. Mine

For what it is worth. I use the RTS01 cable with the IC-7000 / RT Systems software. It works perfectly. 73, WA6TWJ Dave

If I remember correctly they do have instructions on how to make a copy of the CD version of the software onto another CD so you have a backup. Not sure how that works if you only have the download

I asked this question about the interface cable because they are selling the program separate, without a cable. Better yet for non US OPs, it can be bought as a digital download. (no shipping, customs

I am not working for RT systems but I do know that a lot of manpower in term of time are invested to write such programs and its only natural they want to protect it, so they use special cable, they

Use all 4 conductors because of instantaneous current requirements. They used 2 conductors paired together as the single connectors and wires won't handle the higher well enough to maintain proper

The RT System software is made for the 7k and it only works with its own cable. Don't know why. I have not found any software that works as well. You may be able to make a cable yourself but RT won't

Having purchased an Icom IC-126 power supply I note that the power output consists of two positive and two negative terminals. Likewise the power input to the 7000 has a similar configuration, that

Anyone know what's so special about the RT Systems programing cable? Has anyone tried using a USB CIV cable? The software price is not bad, when bought as a digital download, no shipping