开云体育

Tape works. Comes in assorted colors. Wrap it. Spray it with Krylon! Rudy Marcelletti K8SWD [Non-text portions of this message have been removed]

Do you have any news about your trx? Any results in your repair attempt? Good luck in you project. 73 de DO1KLM, Sigi

Google the term "dip molded pvc caps" and you'll get a raft of useful hits. Two, in no particular order, that look possible are: <http://www.mocap.com/> & <http://www.stockcap.com> Maybe they have

Definitely pricy (~$40.00 for one piece the size I'd need)! Also has hot melt glue internally, so it's a permanent installation - but waterproof! I used similar stuff when installing my submersable

Norm Another solution, that is a 6:1 shrink product, expensive but works great, you can find it at the below link. I now understand what your need is! Gary, Ki4VLH

Thanks - interesting site. I'll have to bookmark it for future reference. However, the dust covers they show are for the wrong end of the connector. I'm looking for the boots that cover the wires as

Forgot to tell you they will have the hoods in many colors! Gary KI4VLH [Non-text portions of this message have been removed]

frozencpu.com

hi, try a pc shop as the molex conectors are often covered with hoods. Happy new year every one, best wishes Andrew VK3AJA

Does anyone know of a source for the vinyl hood that fits over the 4-pin Molex plug for the automatic tuner connection? Norm W6NIM

Short burst of what? If it is RF feedback, then you DO have a problem on digimode, even if it goes away after you start sending. You're just over-riding it. You need to be able to have a clean signal

I have *no* problems on digimode, just checked with a weSDR online. nice clean signal, only a short burst on the start and end of the BPSK31 transmission. So digimode seems to be okay. I also did some

Steve is 100 percent correct when he talks about using the 13 pin ACC port for an interface. I had the same problem with my SignaLink USB and 13 pin cable. RF in the audio. Switched to the 6 pin cable

Thanks, I guess it's simply normal then, just thought it was kind of strange. I've always had a bar or two of ALC when operating PSK and was trying to trace it to something, still dont know whats

And this is what caused the bad audio! Thanks!

Here's my "top 10" things to look into: If you have your digital audio going into the ACC connector, I would try unplugging it (and all other cables going to your computer, such as CI-V, etc.) when

I got it working.? For some reason it was not taking the commands.? Per instructions given on the forum, it now works.? Perplexing!? Thanks all. ? 73, De Larry?- KE6LAW Larry A Witcher ? -.-.

Above the F-1 tag is "LST", and above that is the bank # and channel #.? To the right of the?channel number is the output freq of the repeater. ? 73, De Larry?- KE6LAW Larry A Witcher ? -.-.

Works here. What is just above the F-1 tag "LST"? -- Dean