I got it working.? For some reason it was not taking the commands.? Per
instructions given on the forum, it now works.? Perplexing!? Thanks all.
?
73, De Larry?- KE6LAW
Larry A Witcher
?
-.-. ?--.-? ?-.-.? --.-? ?-.. ?. ?-.- ?. ?-.... ?.-.. ?.-? .--??? -.-. ?--.-?
?-.-.? --.-? ?-.. ?. ?-.- ?. ?-.... ?.-.. ?.-? .--??? -.-?
________________________________
From: W4KRR <w4krr@...>
To: ic7000@...
Sent: Tue, January 1, 2013 1:49:39 PM
Subject: RE: [IC-7000] IC 7K Repeater Name in Display
?
Is there a way to have the assigned name display while it's scanning?
Ken, W4KRR
-----Original Message-----
From: ic7000@... [mailto:ic7000@...] On Behalf Of Robert
Elsinga
Sent: Tuesday, January 01, 2013 4:10 PM
To: ic7000@...
Subject: Re: [IC-7000] IC 7K Repeater Name in Display
On 1-1-2013 22:06, Larry Witcher wrote:
1) AM in M-2
2) Hit MEM (F-1) Soft Key
And then you're done. Look at the two lines below the S-meter...
(unless my Europe version is different than you US version...)
3) Hit List (F-1), that brings up ALL saved freq's.
4) ??????
73, De Larry - KE6LAW
Larry A Witcher
-.-. --.- -.-. --.- -.. . -.- . -.... .-.. .- .-- -.-. --.-
-.-. --.- -.. . -.- . -.... .-.. .- .-- -.-
________________________________
From: Robert Elsinga <robert@...>
To: ic7000@...
Sent: Tue, January 1, 2013 12:53:55 PM
Subject: Re: [IC-7000] IC 7K Repeater Name in Display
On 1-1-2013 21:44, Larry Witcher wrote:
That brings up the list of saved freq's (LST). All I had before was
the input freq and channel aved name along with the other info.
If you get a list of all memories, you hit the LST softkey. The MEM
softkey is on M-2, left one. It changes the split frequency on the
bottom just below the S-meter, to a 2-line display of the repeater
input frequency/split frequency *and* the memory name. The softkey
then changes to LST.
Just powered my 7000 to see if I was confused. ;)
73, De Larry - KE6LAW
Larry A Witcher
-.-. --.- -.-. --.- -.. . -.- . -.... .-.. .- .-- -.-. --.- -.-. --.-
-.. . -.- . -.... .-.. .- .-- -.-
________________________________
From: Robert Elsinga <robert@...>
To: ic7000@...
Sent: Tue, January 1, 2013 12:26:59 PM
Subject: Re: [IC-7000] IC 7K Repeater Name in Display
On 1-1-2013 21:12, Larry wrote:
I accidentally made my 7K display both the input frequency and the
tagged
name
for my memory channels. I would like to keep this feature. After I
rebooted
the
radio, I cannot retrieve nor find in the manual where to set that function.
It
has defaulted to displaying the repeater input frequency (on top,
larger
numbers) and output frequency (on bottom, smaller numbers). Please advise.
Just hit the Mem soft key (on M-1 or M-2, the left one).
--
Robert Elsinga =8-)
www.elsinga.net
------------------------------------
Community email addresses:
Post message: IC7000@...
Subscribe: IC7000-subscribe@...
Unsubscribe: IC7000-unsubscribe@...
List owner: IC7000-owner@...
**
"Spam, racism, name-calling, vulgarity, religious or political propaganda,
personal insults and/or verbal abuse will not be tolerated in this group at any
time. Any member posting such material will be placed on moderated status, and
is subject to deletion and banning."
**
Yahoo! Groups Links
[Non-text portions of this message have been removed]
