That's probably best, and Chirp may work for you using the rt cable.? Some usb/rs232 cables used a cloned chip set that is not compatible with current drivers, and windows hates old drivers.?
Usb cables need to use the ftdi chip set and not the cloned prolific chip set.
Best of luck. Joe KR0UT?
Been thru all of that. Was able to read radio 1 time out of 50 tries. Edited my file to add some stuff an now cannot write back to radio.
Wife spent the 50$ to buy the RT Systems software and cable. Waiting on mail man next week.
Tim
|
Been thru all of that. Was able to read radio 1 time out of 50 tries. Edited my file to add some stuff an now cannot write back to radio.
Wife spent the 50$ to buy the RT Systems software and cable. Waiting on mail man next week.
Tim
|
I haven't tried this but,? (I love advise that starts this way. :) )
Have you tried saving one or two frequencies to the ic-7000 memory and then uploading to Chirp?
It is also possible that you have a baud rate or bit rate mismatch,? or the wrong com port #.? See attached manual page.
Joe KR0UT?
On Sat, Feb 19, 2022, 12:23 PM Tim Davis KJ4DHF via <kj4dhf= [email protected]> wrote: Hello All,
Anyone happen to have a IC-7000 file that was done with CHIRP software.
Trying to setup some memory channels in my 7K and CHIRP will not save the empty memory files to my pc so I can edit then upload to radio.
|
Hello All,
Anyone happen to have a IC-7000 file that was done with CHIRP software.
Trying to setup some memory channels in my 7K and CHIRP will not save the empty memory files to my pc so I can edit then upload to radio.
|
new call sign displays and bluetooth cat interface
Here are my new Acrylic Call Sign Displays, with Dual LED Zones and ICOM CI-V Bluetooth hubs or Yaesu FT8X7 Bluetooth interfaces.
Drop-in to?WWW.VE2DX.COM?or contact me at ve2dx@... if interested
  
--
73
?
Richard VE2DX,?Jesus Island, PQ-014
VE2DX ELECTRONIC? Only the Best ICOM, ERC and HRD? /g/CIVFollow my projects on?
?
|
Re: Running on low power?
toggle quoted message
Show quoted text
On Feb 3, 2022, at 16:26, Glenn M0JFG < glenn@...> wrote:
I have a new amplifier and need to run <12 watts so will need to reduce my output power on a continuous basis. Is thi sage for the IC7000?
|
I have a new amplifier and need to run <12 watts so will need to reduce my output power on a continuous basis. Is thi sage for the IC7000?
|
Re: IC-7000 to Signalink USB
Marius Lubbe - Ham Station
Thanks to all, I understand now
?
73 and Kind Regards,
Marius Lubbe - Cape Town, South Africa
?
--
73
ZS1ML
Marius Lubbe
|
Re: IC-7000 to Signalink USB
I believe the CI-V cable would go directly from the computer to the IC-7000. SignaLink would process audio and CI-V would control CAT and PTT.
I’ll be trying a similar setup soon with a DigiRig.
Good luck and 73,
Ruben
toggle quoted message
Show quoted text
On Jan 23, 2022, at 1:04 PM, Marius Lubbe ZS1ML <marsminds@...> wrote:
?I have received a Signalink USB with the 6Pin to RJ45 cable, a USB to USB cable and a CIV cable.
Connecting the first two is easy, but where does the CI-V cable go on the Signalink? There are the following ports for it SKR, AUX, and MON. Which if any do I use to ensure full CAT and Digi control?
Thanks in advance.73 Marius
ZS1ML
|
Re: IC-7000 to Signalink USB
You need a USB to TTL level RS232 cable.?
I have used several different types when I had an IC-7000.
The least expensive is tp buy a cheap Boefeng programming cable and cut the end off and replace it with a 3.5 mm plug (mono) connect the TX and RX wires to the tip and the ground to the ground.
The CAT-IV has both TX and RX tied together.
|
Re: IC-7000 to Signalink USB
The civ cable is not needed to use the signalink.? It does provide frequency data and control of the 7000 from the computer for programs.? The signaling is the audio interface.? ?Connect the civ cable directly to the computer.? ?
Joe KR0UT?
On Sun, Jan 23, 2022, 2:04 PM Marius Lubbe ZS1ML < marsminds@...> wrote: I have received a Signalink USB with the 6Pin to RJ45 cable, a USB to USB cable and a CIV cable.
Connecting the first two is easy, but where does the CI-V cable go on the Signalink? There are the following ports for it SKR, AUX, and MON. Which if any do I use to ensure full CAT and Digi control?
Thanks in advance.73 Marius
ZS1ML
|
Re: IC-7000 to Signalink USB
The CIV cable needs to have a USB adapter on it and have it plugged into your com[puter.? You will only need the CIV cable if you want full rig control.? The signallink?will provide PTT signal through the 6 pin mini-din connection.
On Sun, Jan 23, 2022 at 3:04 PM Marius Lubbe ZS1ML < marsminds@...> wrote: I have received a Signalink USB with the 6Pin to RJ45 cable, a USB to USB cable and a CIV cable.
Connecting the first two is easy, but where does the CI-V cable go on the Signalink? There are the following ports for it SKR, AUX, and MON. Which if any do I use to ensure full CAT and Digi control?
Thanks in advance.73 Marius
ZS1ML
|
I have received a Signalink USB with the 6Pin to RJ45 cable, a USB to USB cable and a CIV cable.
Connecting the first two is easy, but where does the CI-V cable go on the Signalink? There are the following ports for it SKR, AUX, and MON. Which if any do I use to ensure full CAT and Digi control?
Thanks in advance.73 Marius
ZS1ML
|
Re: IC-7000 to ameritron AL-80B
I used the?Ameritron ARB-704 with my IC-7000 and Heath SB-200. Buy the Ameritron and never look back and if you get finished with it later you can easily sell it. I eliminated my linear setup by buying an IC-2KL.
|
Re: IC-7000 to ameritron AL-80B
Yes, get the one with the Relay.? Or buy an Ameritron ARB-704 to go with the cable.
Steve WA8Y?
Sent via the Samsung Galaxy S10, an AT&T 5G Evolution capable smartphone
toggle quoted message
Show quoted text
-------- Original message -------- From: Greg Engle <gfe@...> Date: 1/19/22 8:15 AM (GMT-05:00) Subject: Re: [ic7000] IC-7000 to ameritron AL-80B
William, ? I highly recommend buying the cable with the relay! It’s a bit more expensive but it’ll protect the switching circuit in the radio. ? Greg NZ6E ? ? Radio to amplifier interface cable. Radio to mfj-998 auto tuner ? On Tue, 18 Jan 2022 at 23:09, H. Gray Bickford <wa6bjy@...> wrote:
--
|
Re: IC-7000 to ameritron AL-80B
William, ? I highly recommend buying the cable with the relay! It’s a bit more expensive but it’ll protect the switching circuit in the radio. ? Greg NZ6E ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of William Reynolds Sent: Wednesday, January 19, 2022 2:57 AM To: [email protected]Subject: Re: [ic7000] IC-7000 to ameritron AL-80B ? Radio to amplifier interface cable. Radio to mfj-998 auto tuner ? On Tue, 18 Jan 2022 at 23:09, H. Gray Bickford <wa6bjy@...> wrote:
--
|
|
|
Re: IC-7000 to ameritron AL-80B
|
Re: IC-7000 to ameritron AL-80B
Hi William, .My name is Pat Cancro (NK3P) and I am a member of Skyview Amateur Radio Society.
I have read some of your postings on the K3MJW reflector. Tonight I saw your question?regarding connecting an amplifier to a IC-7000. I myself have that model radio, but had not previously thought about hooking
mine up that way, but I am interested in?your idea nevertheless.
i'm curious if you have done any research about this issue and would like to talk with you about that.? If you are a member of Skyview and would like to?meet
perhaps at the Club before or after next weeks' regular Tuesday meeting or at another time and place if you would prefer.?
If you are interested or even if you are not, please let me know either way by?email at jpc2@... or phone at 724-309-6304.
Regards, Pat Cancro
Sent from my Verizon, Samsung Galaxy smartphone
Get
toggle quoted message
Show quoted text
How do I use the IC-7000 to key an AL-80B? is there a pre-built cable I can purchase? if so where can I get it? thanks in advance
|
toggle quoted message
Show quoted text
On Tue, 18 Jan 2022 at 11:49, Rick Robinson < rickw8zt@...> wrote: Check the manual for my accuracy but if memory serves me correct your 13 pin connector has a HSend line. This goes to ground with a very limited current rating. Tie this line to an amp keying device between the radio and the amp. The HSend is for when you are using HF, which is what the 80 B is for. Check the group files and you will find some more info. Good luck, read twice , hook up correctly once, no smoke. On Tue, Jan 18, 2022 at 12:01 AM William Reynolds < ham6y5ww@...> wrote: Hi, can anyone tell me how to get my ic-7000 to key my ameritron al-80b? if there is a pre-built cable for that can someone point me in the right direction to get one? thanks in advance.
Rick
Genesis 1-29
|
6Y5WW - William