开云体育

In a message dated 7/13/03 9:11:38 PM Eastern Daylight Time, k4mnj@... writes: << Would it be easier to purchase a heil MC-4 element and insert this into the D-104 head? >> Mike, I don't

wrote: thought photos? I bought a couple of 5m long steel tape measures from Maplin (three quid each - that's around $5) and silver soldered pigtails to the steel thumb tags at the ends. I thought

Well, perhaps it was vice-versa...who cares?? ...Dave

If they got the idea from Collins then why did Collins buy Hy-Gain tape dipoles for the KWM-2 portable set ups? Mike the idea from Collins!! thought photos?

Nope--mine works fine. Battery Tender charger. The charger will go into float when the rig is trickle charging, however, if you set the rig to use its higher charge rate then the charger will remain

HyGain made that gadget for YEARS....And I think perhaps they got the idea from Collins!! ...Dave

Can you elaborate on your tape measure dipole? I've had that thought myself -- variable length, and already accurately measured! Any photos? -- Gerry Wheeler KG4NBB Naples, FL N26.28 W081.76

Anyone have this amp and wanting to part with it, I am interested. Built or still kitted. Thanks

No, nothing to do with solar cells! I have a 7AH Yuasa SLA battery and a three-stage AC charger for it. It all works fine, and will be part of my HF backpack when the UK authorities give us no-coders

Hi Mike, I agree with what your saying but, do you think owners of other model radios are not capable of "user-error" I have not heard of any other radio (Yaesu or otherwise) with this sort of

Mike, Can you get that in writing? Geo W7LFD

Hello, Sounds like your problem is that the power supply is not putting out enough current to operate the radio at the two higher power settings. You stated that it is a "3w" power supply but I assume

Hello, Sounds like your problem is that the power supply is not putting out enough current to operate the radio at the two higher power settings. You stated that it is a "3w" power supply but I assume

Hi all, I picked up my new 817 this morning, but what a disappointment !!!! the "MODE, A, B, & C" buttons don't work... The rest seem to work OK. The rig needs to get back to the dealer ! God I hate

Actually, my first guess is that the power supply or battery voltage is falling below the power down threshold (around 8 volts - I forget the exact number). If you select the PSU voltage display

Wanted: Used LDG RT-11 tuner Condition of case unimportant as tuner is to be heavily modified and transplanted into new box. Could possibly repair a damaged unit. Thanks

checked the antenna jack, front/back? Or the antenna? Sounds like maybe swr protection.

I have an interesting problem with my 817 where it shuts off when I try to transmitt on 2 meters. At first I thought it was just the low power of the batteries but it still does it when I hook it up

The Green LED is lit. IU'm not transmitting either. Apparently I touched the cable with the soldering iron. I'm in the process of shortening the cable. I'll try that until I can get one from Yaesu.

Sounds like a low voltage during transmit problem. A 3 watt power supply will charge the batteries, if it puts out 13.8 volts, and the radio is OFF during charge, but will not supply adequate AMPERAGE