开云体育

Martin HB3YDM You'll find the Sotabeam Speech Compressor at this link https://www.sotabeams.co.uk/speech-compressor-for-ft-817-818/ I have on one my FT-818. Shipment is quick and efficient when

Hi Andy does you have an link from this speechprozessor? Vy 73 de Martin HB3YDM

This will be the last update from me on the speech compressor. Had several good chats this afternoon with airfields on the air stations and a portable station in Ireland. Tried with compressor on and

- Yaesu FT-817 Multi-Mode QRP Portable Transceiver with accessories including OD Green carrier and a strap. $565 - Yaesu FT-817 Multi-Mode QRP Portable Transceiver with accessories. $518 - LDG Z-817

mine is the non nd model but you know i liked it and used it more than the nd model i used to have! jerry w5kaw

You might try doing the pa install tuning. There are 2 pots on the pa board where using inline Amp meter with pa an?adjust each pot for proper current. Must do separate for each pot.? 73 Ron n9ee

Hi Mike! This is definitely a sign that something in the radio is getting worn out and likely will need to be replaced soon.? Based solely on the observations you've had, my initial suspect is a

Hello, My FT-817ND (bought new in 2004) takes some time to reach 5 Watts after first powering on. Example: apply 12V external supply, power on rig, key down on 28.060 MHz CW.? Power is initially

Re: SWR. My FT817ND was purchased new in early 2006. The SWR readings don't match this table: https://www.ka7oei.com/ft817_vswr.html On mine there are no SWR bars on 145 MHz, but 2 to 3 bars on 435

Rick, I was thinking something more simple (my electronics habilities goes as far as pressing the power button). I was wondering if a Digirig and the APRSDroid would work. Daniel PY2TDB. Em qui.,

Why not use the keyer as a full keyer. ?Let it control the timing. I often hear users I can tell using a bug bad dah timing is sloppy sending. The why we are called hams poor cw ops from early days

How many hours did you spend resolving that issue? Yaesu charges $90/hr to repair Amateur Radios, and component-level repairs for a radio may not be cost-effective. They have to balance effort, cost,

Didn't Yaesu announce they would no longer repair original (non-ND) FT-817 radios? Sending their FT-817 to Yaesu may not be an option for OP, depending on his specific radio... Ken, N2VIP

Rob I have a guy that does a great job on my radios. Had him work on my 817,Kenwood 200, Kenwood 450SAT. His name is Tim Moes in South Dakota. www.midwest-technical.com E-mail is

John, I'd second the recommendation for a single lever paddle.? A single lever is pretty much the same as using a bug.? If you accidentally manually key you dashes, the keyer will still accept the

I'm curious what they did and what they charged. I sent an FT857D to Yaesu in California for repair a year ago. They told me they would need to replace the main board and it would cost over $650. This

I sent mine to Yaesu in California.? Very happy with the repair and I thought the cost was very fair. -- Rob VE3RXH

Hi, when does not found an repair person, I have an address in Switzerland, Write me when you not found an repair center in our city. Vy 73 de Martin HB3YDM

Please remember the original Winamp battery has 9-12.6 V normal voltage 12.1 V Normal capacity 3000mah/33.3Wh