开云体育

Ron, Can you send a picture of the menu screen? It may tell us something about the mode the radio is in. Al Skierkiewicz

Hi Mike I have confirmed that on my FT-817 when I have my paddle plugged in and want to try to use it as a straight key with the paddle the left paddle is the one that keys the rig. I thought in

FB Marty, it sounds like you will get it sorted out. Menu 19 paddle normal or reverse works only with the keyer activated. 73, Mike

Thanks, Greg. Yes, that could be one solution. At least I know now I have a normal FT-818...a few responses indicate that at least some of them have smaller holes than the '817, though

Hi Mike Yes on all of that, I did try menu 19 to reverse the paddle but it didn't seem to help. But that may have been before I rewired the paddle. I found the ground wire had come broken at the

Hi Marty, With BK active you will still activate the transmitter. For off air practice you would want to un-tick it as well. You would have to reverse the dit-dah the wiring on your paddle to change

HI Group It has been quite a while since I have had my ft-817 on the air, moving and such has gotten in the way. I hooked it up last night and see something I can't remember exactly how to do, and

Have you tried doing a full reset to factory? A second question, was there any update or programing being done before the problem started?

Yeah - weird! Not much help for the DO-IT-YOURSELF method. But I have found Yaesu repair facility to be quick, do a great job, and at a reasonable cost. Frankly, if you offered me that much to

Seems more like a wiring problem, or perhaps an issue with one of the ICs. Either way, a processor reset isn't going to fix it. Greg KO6TH 'Ron Schaffner'

Hi guys: Before I send my radio off to Yaesu, I thought I'd run the problem by the group. My radio shows running all modes on each of the top buttons. In other words, instead on selecting the

I used a similar connector (forget where I got it) and simply didn't push the outer cover all the way up to the end. Ran some tape around the outside to keep it from moving, and it's worked

Does anyone have a preferred source for plugs, or for plugs with integrated shielded cables, to fit the ACC and DATA jacks on the FT-818? I discovered on Friday that the plugs sold by the local

Capt, Did you ever solve yoiur sailboat proplem... I owned a Hunter 25.5 for a while and wanted to operate on the Great Salt Lake.... living in Ogden, Ut. Sold the boat before I could play radio on

Announcing W6SFM's BUG ROUNDUP The Samuel F. Morse Amateur Radio Club, a Sacramento, California based CW enthusiast club wanted a special time to bring bug operators together on the air. In the

Announcing W6SFM's BUG ROUNDUP The Samuel F. Morse Amateur Radio Club, a Sacramento, California based CW enthusiast club wanted a special time to bring bug operators together on the air. In the

Yup – EASY………….. Sent: Friday, May 3, 2019 7:12 AM To: FT817@... Subject: Re: [FT817] Re: FS: NEW LNR MTR5B Mountain Topper Can someone tell, how is this advertisement

Can someone tell, how is this advertisement related to the Yaesu FT-817? J. Rivera WP4JBG

Hi all, A number of you who own our Kx33 power supply asked us for this adapter for use with the stock Yaesu charger, so we are now stocking a 4.0mm x 1.7mm female DC power jack to Anderson PowerPole

I know. It is for the MFJ power supply and similar. Randy ka4nma -- Declare His glory among the nations, His marvelous deeds among all peoples (1 Chronicles 16:24)