开云体育

Does anyone know if the kits, if they were available would work with the FT818? I’ve found a couple on the secondary market… Thanks, Dan -- Daniel Holmes, danielh@... "Laugh while

I disagree 1000%.? I too have thousands of contacts from many US states and several European countries, and some pretty good DX too.? For "CASUAL" CW operation on good bands, I more often than

I disagree 1000%.? For casual CW, THE Vy73 -- Mike -- KD5KC Strahlungen Germany

Hi I guess it depends. If you don't do CW then the narrow filter isn't mandatory, and if only occasionally do CW then an audio filter might be good enough. I have the 500HZ filter installed and have

The 500 hz cw filter is a mandatory addition to this radio. The SSB filter is a bit close to the stock filter waveshape to probably not bother. Thousands of contacts and I still love this radio John

I'm interested in getting a 500 Hz CW filter for my ft-817 ND.??I'm confused by all the options available.??Yaesu offers a YF-122C. I guess these are expensive and maybe not the best performing?Then I

This is a link to see where you will most likely find the digital modes on HF. https://www.qsl.net/sv1grb/psk31.htm Also I would like to mention that I have noticed compared to other radios (my

Brian, Do you have a narrow filter in this radio? It is possible that you have selected the narrow (CW) filter for all bands. That filter is normally only 500HZ wide or less if it is not a Yaesu

In case you have trouble finding a field day location close to you, here's a link to the ARRL Field Day Locator Page: http://www.arrl.org/field-day-locator Ken, N2VIP

Thanks so much for the advice and encouragement. The good news I have spent so much time fooling around with settings etc. that I have learned a lot about the radio. I may have heard the FT8 tones as

Hi again Brian, SSB signals are a bit sparse at the moment so I don’t even bother as I’m antenna limited, but digital modes are alive and well - try listening for FT8 signals on 20 metres at

Hi Paul I checked all those settings and then went through all of the bands and just couldn’t hear anything but noise using a long wire. Wondering if because I live in a wooded area and somewhat

Brian, Well, you could very well have a problem with radio or antenna, but be aware that we are at the bottom of solar cycle 24, and the HF bands are not in good shape with few signals many hours of

Brian, check menu item 45 is set to RF GAIN not SQUELCH then rotate the knob to max full clockwise position, then check that you have the ATTENUATION turned off and the IPO ( PRE-AMP) turned on both

Hi Brian, First thing to check is that you’re on the correct antenna connector. If there is an “R” after the frequency display you are on the rear antenna connector (UHF) but if there is no R

Hi folks, A quick update. Thanks to all for the various morsels of wisdom. They were all helpful. To document this for others: 1. Connected the output of the

Hi Derrick you will need to plug the data looking mini din plug in , I fits the socket near the antenna socket, that will give the amp the TX line switching from the radio , you say you have already

G'day Derrick,Hopefully this site has enough "instructions" in the review to help you.https://vk2qr.wordpress.com/2014/11/25/mx-p50m-hf-amplifier-review/73 Steve VK2ARS

Hi all, I hope someone can help me set up my "MX-P50M" amp I have just bought off Ebay with my FT817 please?Absolutely no instructons with it, I connected it up and connected both dc leads to 13.7V

After passing my General I purchased a used FT-817 and my plan was to just string a wire and listen until I learned enough to actually start transmitting. What I don’t understand is I am not hearing