开云体育

Jonathon, Use PKT mode and the rear data jack for FM Jim JG1KGS

Hello all: We use fldigi for my local ares group. ?I want to use my FT817 for some simple practice at our local face to face meetings. ?When I go to transmit I don't get any audio out of the

Just figured it out. I had the plug into the incorrect jack on the back of the radio. Plugged it into the correct jack and all is well. Got a great 817 up and running. Now to make some contacts.

Baud rate? This message was delivered by flying monkeys!

Just got an 817 up and running, New drivers, aligned bias, it is now sounding great. I am now trying to read the 817 with Chirp and keep getting this error. block 00 expected 4 got 2. Anyone got

Taking the TX inhibit pin on the ACC connector high inhibits transmission (although the radio still switches to transmit mode). I've read some posts in various places which talk about the 817 sensing

Many thanks for all the replies. It looks like if I pull up the TX Inhibit pin to the +V supply rail then any RF output will be prevented. Regards, David - G4EDR

I use this feature as part of my 10GHz transverter sequencing. i am pretty sure, albeit from memory, that a high (+12v) voltage on the TX Inh input will disable any RF out even though teh radio does

I finally got around to looking at the manual, and there is a TX Inhibit pin on the ACC connector on the back of the radio. You'll need to dig through a bunch of sequencer documentation to figure out

Not sure if others have figured this out, but I thought I’d share: I sent my first successful winlink messages with my FT-817nd. I was using a Signalink connected to the 6 pin DIN port. I set to

Also failed from uk but just searched for alexloop and it came up as new item.Simple but good ideasAlan M0OLT Sent from my Samsung Galaxy smartphone.

---------- Forwarded message ---------- From: Bennthy Rosen <sm2jur@... mailto:sm2jur@...> Date: 2016-11-14 4:36 GMT+01:00 Subject: Re: [FT817] Re: Greetings To: FT817@...

Adam, KC7DVF Thanks for the mail and i am happy with my new rig yeasu 817nd. I am also intresting to be qrv around North Sweden in the summer. I was amature in 1978 and this hobby is giving mee so

Muito legal Alex estive em Lorena com a alexloop Enviado do meu iPhone

Thank you very much Ian. PY1AHD ALEX Alexandre Grimberg Em 13/11/2016 17:10, 'Ian MacQuillan' ian.macquillan@... [FT817] escreveu:

Thanks Alex This link worked fine. Very interesting Ian ZL2AIM

If the microphone PTT line is a pull down to ground or some such function, you might be able to tie that line high. If there's anything on the rear panel which serves the same function a similar

Rudy, right? Good to hear from you. That's a thought since I've been ramping up, on paper at least, a scratch glider design. It's further for me now though. When is it? Best, Sonny N1KHB

Sonny,Gonna make WRAM this year?Rwa2nub To: FT817@... Sent: Saturday, November 12, 2016 8:57 PM Subject: Re: [FT817] Re: Four ways to use the AlexLoop ? Me too. ?Sonny???In a

Me too. Sonny